Now that we have everything in place, enable using HEST GPA
instead of etc/hardware_errors GPA.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <ad77b64aa1f09141efe942539445908631423975.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create a QMP command to be used for generic ACPI APEI hardware error
injection (HEST) via GHESv2, and add support for it for ARM guests.
Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform
independent. This is mapped at arch virt bindings, depending on the
types supported by QEMU and by the BIOS. So, on ARM, this is supported
via ACPI_GHES_NOTIFY_GPIO notification type.
This patch was co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Shiju Jose <shiju.jose@huawei.com>
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <81e2118b3c8b7e5da341817f277d61251655e0db.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds a generic error device to handle generic hardware error
events as specified at ACPI 6.5 specification at 18.3.2.7.2:
https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#event-notification-for-generic-error-sources
using HID PNP0C33.
The PNP0C33 device is used to report hardware errors to
the guest via ACPI APEI Generic Hardware Error Source (GHES).
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <2790f664c849d53de0ce3049fa8c7950c1de1f86.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create a new property (x-has-hest-addr) and use it to detect if
the GHES table offsets can be calculated from the HEST address
(qemu 10.0 and upper) or via the legacy way via an offset obtained
from the hardware_errors firmware file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <c4eb3cf32a3f158ae62dac29e866ac3f373956c3.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GHES migration logic should now support HEST table location too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <ede7ddf4b10f34094a4327dc458d630ad319bd1c.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some error injection notify methods are async, like GPIO
notify. Add a notifier to be used when the error record is
ready to be sent to the guest OS.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <edf9c6e5b80dc57e3443893bf9e1eb25cb9d266b.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code is actually dependent on having just one error
structure with a single source, as any change there would cause
migration issues.
As the number of sources should be arch-dependent, as it will depend on
what kind of notifications will exist, and how many errors can be
reported at the same time, change the logic to be more flexible,
allowing the number of sources to be defined when building the
HEST table by the caller.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <1698680848c11d6f26368426f1657e14faaf55c4.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two pointers that are needed during error injection:
1. The start address of the CPER block to be stored;
2. The address of the read ack.
It is preferable to calculate them from the HEST table. This allows
checking the source ID, the size of the table and the type of the
HEST error block structures.
Yet, keep the old code, as this is needed for migration purposes
from older QEMU versions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <d4344e8dbe66372e1e093d968eda2e8b0527ba48.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Store HEST table address at GPA, placing its the start of the table at
hest_addr_le variable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <c29aa5e6ab9b2d93dd5328481630c3b03da86261.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new ags flag to change the way HEST offsets are calculated.
Currently, offsets needed to store ACPI HEST offsets and read ack
are calculated based on a previous knowledge from the logic
which creates the HEST table.
Such logic is not generic, not allowing to easily add more HEST
entries nor replicates what OSPM does.
As the next patches will be adding a more generic logic, add a
new use_hest_addr, set to false, in preparation for such changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <f5de17bf04b27828e1a439ad396b4f7982eaf156.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the check logic into a common function and simplify the
code which checks if GHES is enabled and was properly setup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <2bbb1d3eb88b0a668114adef2f1c2a94deebba0e.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ghes_record_cper_errors() function was introduced to be used
by other types of errors, as part of the error injection
patch series. That's why it is not static.
Make it non-static again to allow its usage outside ghes.c
This reverts commit 611f3bdb20.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <14f2a888cfbf922d5f2bf94d7612114f25107d59.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reading QEMU_CLOCK_VIRTUAL is thread-safe, write access is NOP.
This makes possible to boot Windows with large vCPUs count when
hv-time is not used.
Reproducer:
-M q35,hpet=off -cpu host -enable-kvm -smp 240,sockets=4 -m 8G WS2025.img
fails to boot within 30min.
With this fix it boots within 2-1min.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250814160600.2327672-3-imammedo@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we build the PPTT starting from the socket node and each
socket will be a separate tree. For a multi-socket system it'll
be hard for the OS to know the whole system is homogeneous or not
(actually we're in the current implementation) since no parent node
to telling the identical implementation informentation. Add a
root node for indicating this.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com>
Message-Id: <20250714173146.511-4-alireza.sanaee@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per ACPI 6.5 Table 5.158: Processor Structure Flags, the identical
implementation flag indicates whether all the children processors
of this node share the same identical implementation revision.
Currently Linux support parsing this field [1] and maybe used to
identify the heterogeneous platform. Since qemu only support
homogeneous emulation, set this flag for all the processor node
to indicates the facts when building the PPTT table. Node leaf
is an exception since spec says this flag should be ignored
on leaf nodes by OSPM.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/acpi/pptt.c?h=v6.11-rc1#n810
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com>
Message-Id: <20250714173146.511-3-alireza.sanaee@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a subsection to migrate the AcpiPciHpState state.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20250714080639.2525563-30-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add PCI device related code in the TYPE_HOTPLUG_HANDLER
implementation.
For a PCI device hotplug/hotunplug event, the code routes to
acpi_pcihp_device callbacks (pre_plug_cb, plug_cb, unplug_request_cb,
unplug_cb).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-27-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property will be set by the machine code on the object
creation. It will be used by acpi pcihp hotplug code.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-25-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the DSDT ACPI table to enable ACPI PCI hotplug.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-24-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move aml_pci_edsm to pci-bridge.c since we want to reuse that for
ARM and acpi-index support. Also rename it into build_pci_bridge_edsm.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-17-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcihp acpi_set_pci_info() generic code currently uses
acpi_get_i386_pci_host() to retrieve the pci host bridge.
To make it work also on ARM we get rid of that call and
directly use AcpiPciHpState::root.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-16-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We intend to reuse build_append_pci_bus_devices and build_append_pcihp_slots
on ARM. So let's move them to hw/acpi/pcihp.c as well as all static
helpers they use.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-15-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_append_notification_callback() on ARM
so let's move it to pcihp.c.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-14-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On ARM we will put the operation regions in AML_SYSTEM_MEMORY.
So let's allow this configuration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-13-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract the code that reserves resources for ACPI PCI hotplug
into a new helper named build_append_pcihp_resources() and
move it to pcihp.c. We will reuse it on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-12-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new boolean property is introduced. This will be used to turn
ACPI PCI hotplug support. By default it is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Restrict "exec/tswap.h" to the tswap*() methods,
move the load/store helpers with the other ones
declared in "qemu/bswap.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This leak was detected by the valgrind.
The crs_range_merge() function unconditionally allocated a GPtrArray
'even when range->len was zero, causing an early return without freeing
the allocated array. This resulted in a memory leak when an empty range
was processed.
Instead of moving the allocation after the check (as previously attempted),
use g_autoptr for automatic cleanup. This ensures the array is freed even
on early returns, and also removes the need for the explicit free at the
end of the function.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-Id: <20250613085110.111204-1-lizhijian@fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously these somewhat device like structures were tracked using a list
in the CXLState in each machine. This is proving restrictive in a few
cases where we need to iterate through these without being aware of the
machine type. Just make them sysbus devices.
Restrict them to not user created as they need to be visible to early
stages of machine init given effects on the memory map.
This change both simplifies state tracking and enables features needed
for performance optimization and hotness tracking by making it possible
to retrieve the fixed memory window on actions elsewhere in the topology.
In some cases the ordering of the Fixed Memory Windows matters.
For those utility functions provide a GSList sorted by the window index.
This ensures that we get consistency across:
- ordering in the command line
- ordering of the host PA ranges
- ordering of ACPI CEDT structures describing the CFMWS.
Other aspects don't have this constraint. For those direct iteration
of the underlying hash structures is fine.
In the setup path for the memory map in pc_memory_init() split the
operations into two calls. The first, cxl_fmws_set_mmemap(), loops over
fixed memory windows in order and assigns their addresses. The second,
cxl_fmws_update_mmio() actually sets up the mmio for each window.
This is obviously less efficient than a single loop but this split design
is needed to put the logic in two different places in the arm64 support
and it is not a hot enough path to justify an x86 only implementation.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several source comments still refer to docs with the old .txt
extension that were previously converted to reStructuredText.
Update these references to use the correct .rst extensions to
maintain accurate in-tree documentation pointers.
No functional changes.
Related commits:
50f8174c5c (Jul 2021): docs/specs/acpi_nvdimm: Convert to rST
f054eb1c92 (Jul 2021): docs/specs/acpi_pci_hotplug: Convert to rST
912fb3678b (Sep 2023): docs/specs/vmgenid: Convert to rST
bb1cff6ee0 (Sep 2023): docs/specs/ivshmem-spec: Convert to rST
55ff468f78 (Jan 2022): docs: Rename ppc-spapr-hotplug.txt to .rst
Signed-off-by: Sean Wei <me@sean.taipei>
Message-ID: <20250616.qemu.relocated.05@sean.taipei>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix typo in QEMU's ACPI PCI hotplug API function name that checks
whether a given bus is hotplug-capable.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove the ICH9_DEBUG macro, which is only used to dump the value of the
pm_io_base parameter, passed to ich9_pm_iospace_update(). It provides
little to no value and is not worth converting to a trace event.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This requires some adjustments to callers to avoid possible behaviour
changes for PCI devices.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250401140153.685523-3-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Rename pci_ipmi_bt_get_fwinfo to pci_ipmi_kcs_get_fwinfo in the
pci_ipmi_kcs.c file.]
Signed-off-by: Corey Minyard <corey@minyard.net>
Define acpi_tables / acpi_tables_len stubs, then replace the
compile-time CONFIG_ACPI check in fw_cfg.c by a runtime one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20250307223949.54040-4-philmd@linaro.org>
acpi_builtin() can be used to check at runtime whether
the ACPI subsystem is built in a qemu-system binary.
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250307223949.54040-3-philmd@linaro.org>
CpuState caches its CPUClass since commit 6fbdff8706
("cpu: cache CPUClass in CPUState for hot code paths"),
use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250122093028.52416-10-philmd@linaro.org>
acpi_ghes_memory_errors() is the only caller, no need to expose
the function. Besides, the last 'return' in this function isn't
necessary and remove it.
No functional changes intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250214041635.608012-2-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.
When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.
The device exposes a shared memory region to guests, which can be mapped
all the way to userspace. In the first phase, this merely advertises a
'disruption_marker', which indicates that the guest should throw away any
NTP synchronization it thinks it has, and start again.
Because the region can be exposed all the way to userspace, applications
can still use time from a fast vDSO 'system call', and check the
disruption marker to be sure that their timestamp is indeed truthful.
The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch.
The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, a simple ACPI device along the lines of VMGENID is perfectly
sufficient and is compatible with what's being shipped in certain
commercial hypervisors.
Linux guest support was merged into the 6.13-rc1 kernel:
https://git.kernel.org/torvalds/c/205032724226
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <07fd5e2f529098ad4d7cab1423fe9f4a03a9cc14.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
