Currently the code that reads the qtest protocol commands insists
that every input line has a command. If it receives a line with
nothing but whitespace it will trip an assertion in
qtest_process_command().
This is a little awkward for the case where we are feeding qtest a
set of bug-reproduction commands via standard input or a file,
because it means you need to be careful not to leave a blank line at
the start or the end when cutting and pasting the command sequence
from a bug report.
Change the code to allow and ignore blank lines in the input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20251106151959.1088095-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the qtest_event() QEMUChrEvent handler, we create a timer
and log OPENED on CHR_EVENT_OPENED, and we destroy the timer and
log CLOSED on CHR_EVENT_CLOSED. However, the chardev subsystem
can send us more than one CHR_EVENT_CLOSED if we're reading from
a file chardev:
* the first one happens when we read the last data from the file
* the second one happens when the user hits ^C to exit QEMU
and the chardev is finalized: char_fd_finalize()
This causes us to call g_timer_elapsed() with a NULL timer
(which glib complains about) and print an extra CLOSED log line
with a zero timestamp:
[I +0.063829] CLOSED
qemu-system-aarch64: GLib: g_timer_elapsed: assertion 'timer != NULL' failed
[I +0.000000] CLOSED
Avoid this by ignoring a CHR_EVENT_CLOSED if we have already
processed one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20251107174306.1408139-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The actual backend is "Chardev", CharBackend is the frontend side of
it (whatever talks to the backend), let's rename it for readability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Link: https://lore.kernel.org/r/20251022074612.1258413-1-marcandre.lureau@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250708215320.70426-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In commit 98ed8ecfc9 ("exec: introduce target_words_bigendian()
helper") target_words_bigendian() was matching the definition it
was depending on (TARGET_WORDS_BIGENDIAN). Later in commit
ee3eb3a7ce ("Replace TARGET_WORDS_BIGENDIAN") the definition was
renamed as TARGET_BIG_ENDIAN but we didn't update the helper.
Do it now mechanically using:
$ sed -i -e s/target_words_bigendian/target_big_endian/g \
$(git grep -wl target_words_bigendian)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250417210025.68322-1-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is invalid to call clock_step with an implied time to step forward
as if no timers are running we won't be able to advance.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-7-alex.bennee@linaro.org>
qtest_send_prefix never actually sent something over the chardev, all
it does is print the timestamp to the QTEST_LOG when enabled. So
rename the function, make it static, remove the unused CharDev and
simplify all the call sites by handling that directly with
qtest_send (and qtest_log_send).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-6-alex.bennee@linaro.org>
Don't both creating a GString to temporarily hold our qtest command.
Instead do a simpler g_strndup and use autofree to clean up
afterwards.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-5-alex.bennee@linaro.org>
Time will not advance if the system is paused or there are no timer
events set for the future. In absence of pending timer events
advancing time would make no difference the system state. Attempting
to do so would be a bug and the test or device under test would need
fixing.
Tighten up the result reporting to `FAIL` if time was not advanced.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2687
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250108121054.1126164-18-alex.bennee@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Move the key functionality of moving time forward into the clock
sub-system itself. This will allow us to plumb in time control into
plugins.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-7-alex.bennee@linaro.org>
This generalises the qtest_clock_warp code to use the AccelOps
handlers for updating its own sense of time. This will make the next
patch which moves the warp code closer to pure code motion.
From: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240530220610.1245424-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-6-alex.bennee@linaro.org>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1.
Using qemu_hexdump_line both fixes the deprecation warning and
simplifies the code base.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>`
[rth: Use qemu_hexdump_line]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-8-richard.henderson@linaro.org>
"hw/core/cpu.h" declares 'first_cpu'. Include it to avoid
when unrelated headers are refactored:
system/qtest.c:548:33: error: use of undeclared identifier 'first_cpu'
address_space_write(first_cpu->as, addr, MEMTXATTRS_UNSPECIFIED,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212113016.29808-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rename the variable to fix:
softmmu/qtest.c:869:13: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
Object *qtest;
^
softmmu/qtest.c:53:15: note: previous declaration is here
static QTest *qtest;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231009100251.56019-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
