Some sysbus devices have conditional mmio regions. This
happens for instance with the hw/acpi/ged device. In that case
it becomes difficult to predict which index a specific MMIO
region corresponds to when one needs to mmio map the region.
Introduce a new helper that takes the name of the region instead
of its index. If the region is not found this returns -1.
Otherwise it maps the corresponding index and returns this latter.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-31-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the DSDT ACPI table to enable ACPI PCI hotplug.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-24-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move aml_pci_edsm to pci-bridge.c since we want to reuse that for
ARM and acpi-index support. Also rename it into build_pci_bridge_edsm.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-17-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We intend to reuse build_append_pci_bus_devices and build_append_pcihp_slots
on ARM. So let's move them to hw/acpi/pcihp.c as well as all static
helpers they use.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-15-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_append_notification_callback() on ARM
so let's move it to pcihp.c.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-14-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On ARM we will put the operation regions in AML_SYSTEM_MEMORY.
So let's allow this configuration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-13-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract the code that reserves resources for ACPI PCI hotplug
into a new helper named build_append_pcihp_resources() and
move it to pcihp.c. We will reuse it on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-12-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the acpi pcihp property value from the ged. In case this latter
is not set, PCI native hotplug is used on pci0. For expander bridges we
keep pci native hotplug, as done on x86 q35.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-8-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new boolean property is introduced. This will be used to turn
ACPI PCI hotplug support. By default it is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to export aml_pci_device_dsm() as it is only used
in hw/i386/acpi-build.c.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The address_type bit will be set to PCI_AT_TRANSLATED by devices that
use cached addresses obtained via ATS.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI SPCR (Serial Port Console Redirection) table allows firmware
to specify a preferred serial console device to the operating system.
On ARM64 systems, Linux by default respects this table: even if the
kernel command line does not include a hardware serial console (e.g.,
"console=ttyAMA0"), the kernel still register the serial device
referenced by SPCR as a printk console.
While this behavior is standard-compliant, it can lead to situations
where guest console behavior is influenced by platform firmware rather
than user-specified configuration. To make guest console behavior more
predictable and under user control, this patch introduces a machine
option to explicitly disable SPCR table exposure:
-machine spcr=off
By default, the option is enabled (spcr=on), preserving existing
behavior. When disabled, QEMU will omit the SPCR table from the guest's
ACPI namespace, ensuring that only consoles explicitly declared in the
kernel command line are registered.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20250528105404.457729-2-me@linux.beauty>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we have a server running disk requests that is for whatever reason
hanging or not able to process any more IO requests but still has some
in-flight requests previously issued by the guest OS, QEMU will still
try to drain the vring before shutting down even if it was explicitly
asked to do a "force shutdown" via SIGTERM or QMP quit. This is not
useful since the guest is no longer running at this point since it was
killed by QEMU earlier in the process. At this point, we don't care
about whatever in-flight IO it might have pending, we just want QEMU
to shut down.
Add an option called "skip-get-vring-base-on-force-shutdown" to allow
SIGTERM/QMP quit() to actually act like a "force shutdown" at least
for vhost-user-blk devices since those require the drain operation
to shut down gracefully unlike, for example, network devices.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20250609212547.2859224-4-d-tatianin@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds an ability to skip GET_VRING_BASE during device stop entirely,
and thus the expensive drain operation that this call entails as well,
which may be useful during a non-graceful shutdown in case the guest
operating system hangs or refuses to react to a previously requested
ACPI shutdown for whatever reason.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20250609212547.2859224-3-d-tatianin@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By default, virtio-net limits the hash types that will be advertised to
the guest so that all hash types are covered by the offloading
capability the client provides. This change allows to override this
behavior and to advertise hash types that require user-space hash
calculation by specifying "on" for the corresponding properties.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-6-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve peer hashing capability instead of hardcoding.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-4-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DEFINE_PROP_ON_OFF_AUTO_BIT64() corresponds to DEFINE_PROP_ON_OFF_AUTO()
as DEFINE_PROP_BIT64() corresponds to DEFINE_PROP_BOOL(). The difference
is that DEFINE_PROP_ON_OFF_AUTO_BIT64() exposes OnOffAuto instead of
bool.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-1-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* New board type max78000fthr
* Enable use of CXL on Arm 'virt' board
* Some more tidyup of ID register handling
* Refactor AT insns and PMU regs into separate source files
* Don't enforce NSE,NS check for EL3->EL3 returns
* hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
* Allow nested-virtualization with KVM on the 'virt' board
* system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
* hw/arm/virt-acpi-build: Don't create ITS id mappings by default
* target/arm: Remove unused helper_sme2_luti4_4b
-----BEGIN PGP SIGNATURE-----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=hJ4/
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250711' of https://gitlab.com/pm215/qemu into staging
target-arm queue:
* New board type max78000fthr
* Enable use of CXL on Arm 'virt' board
* Some more tidyup of ID register handling
* Refactor AT insns and PMU regs into separate source files
* Don't enforce NSE,NS check for EL3->EL3 returns
* hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
* Allow nested-virtualization with KVM on the 'virt' board
* system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
* hw/arm/virt-acpi-build: Don't create ITS id mappings by default
* target/arm: Remove unused helper_sme2_luti4_4b
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmhxEcoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3j5yEACWYnNeqo8Yph6/EJExE6eV
# r0tC6FBb5ShPgA6kDxhpOc1lI6uXGh8+D7bL9BePEdz/brCf1QDfs2Z4q/hb5ysX
# D0H6VI5Gr1j6MjkFRBo3+vvYz4Yh++XLn5Q9lZv8zaSEdraq/ay2kxnuhRCK+4Ar
# +QoGtKrGMJ7UCpfiRlvNnd1UjgORZf10EE/bRImX13sxeDomP3CZhFzAyJyShOP9
# JA7bAd4rYJ4oj8R33y8Yaxjwm4FOndj740B0zwpO8mpjzFiE5zbqsaO+mEgYSflc
# OQisCu/KRFpyIR+UqP+4gNaJLfKQW5Y4r61zEaiJWV/c4RdKNnbK1f7MX11fNhOk
# k1paF3GIXp6f794Hb14vtsYnKHF2eeNSmRkAomXxLgUSYzLezL+yj7cdYmRJhgYU
# thc1PSiEmHYhjRmOaMC9+dkMtvIexWyDNYNFTygoOE5/kTMSazeTFQpFmw+ZuTee
# 9pjKsYRZJgTa64IkJy1L34jc2gds48Q20KpQsqZ22KQcjwt4PW4eQXkvMylawSut
# mArHVH6AAxIK+defeEmnQCJ0OccyGCENjRDuWyWMMGoP/ggZpO47rGWmCUOK8xz8
# IfGdPeF/9xsKSKWvjpiHyyKa48wuO2bVC+5bISS6IPA2uGneS2DpmjkHU+gHBqpk
# GNlvEnXZfavZOHejE7/L/Q==
# =hJ4/
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Jul 2025 09:29:46 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250711' of https://gitlab.com/pm215/qemu: (36 commits)
tests/functional: Add a test for the MAX78000 arm machine
docs/system: arm: Add max78000 board description
target/arm: Remove helper_sme2_luti4_4b
hw/arm/virt-acpi-build: Don't create ITS id mappings by default
system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
hw/arm/virt: Allow virt extensions with KVM
hw/arm/arm_gicv3_kvm: Add a migration blocker with kvm nested virt
target/arm: Enable feature ARM_FEATURE_EL2 if EL2 is supported
target/arm/kvm: Add helper to detect EL2 when using KVM
hw/arm: Allow setting KVM vGIC maintenance IRQ
hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
target/arm: Don't enforce NSE,NS check for EL3->EL3 returns
target/arm: Split out performance monitor regs to cpregs-pmu.c
target/arm: Split out AT insns to tcg/cpregs-at.c
target/arm: Drop stub for define_tlb_insn_regs
arm/kvm: shorten one overly long line
arm/cpu: store clidr into the idregs array
arm/cpu: fix trailing ',' for SET_IDREG
arm/cpu: store id_aa64afr{0,1} into the idregs array
arm/cpu: store id_afr0 into the idregs array
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Memory about LoongArchExtIOICommonState::cpu is allocated in common
code, it had better be freed in common code also.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Allow virt arm machine to set the interrupt ID for the KVM
GIC maintenance interrupt.
This setting must be done before the KVM_DEV_ARM_VGIC_CTRL_INIT
hence the choice to perform the setting in the GICv3 realize
instead of proceeding the same way as kvm_arm_pmu_set_irq().
Signed-off-by: Haibo Xu <haibo.xu@linaro.org>
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20250707164129.1167837-2-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Code based on i386/pc enablement.
The memory layout places space for 16 host bridge register regions after
the GIC_REDIST2 in the extended memmap. This is a hole in the current
map so adding them here has no impact on placement of other memory regions
(tested with enough CPUs for GIC_REDIST2 to be in use.)
The high memory map is GiB aligned so the hole is there whatever the
size of memory or device_memory below this point.
The CFMWs are placed above the extended memmap. Note the existing
variable highest_gpa is the highest GPA that has been allocated at
a particular point in setting up the memory map. Whilst this caused
some confusion in review there are existing comments explaining this
so nothing is added.
The cxl_devices_state.host_mr provides a small space in which to place
the individual host bridge register regions for whatever host bridges are
allocated via -device pxb-cxl on the command line. The existing dynamic
sysbus infrastructure is not reused because pxb-cxl is a PCI device not
a sysbus one but these registers are directly in the main memory map,
not the PCI address space.
Only create the CEDT table if cxl=on set for the machine. Default to off.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Message-id: 20250703104110.992379-4-Jonathan.Cameron@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously these somewhat device like structures were tracked using a list
in the CXLState in each machine. This is proving restrictive in a few
cases where we need to iterate through these without being aware of the
machine type. Just make them sysbus devices.
Restrict them to not user created as they need to be visible to early
stages of machine init given effects on the memory map.
This change both simplifies state tracking and enables features needed
for performance optimization and hotness tracking by making it possible
to retrieve the fixed memory window on actions elsewhere in the topology.
In some cases the ordering of the Fixed Memory Windows matters.
For those utility functions provide a GSList sorted by the window index.
This ensures that we get consistency across:
- ordering in the command line
- ordering of the host PA ranges
- ordering of ACPI CEDT structures describing the CFMWS.
Other aspects don't have this constraint. For those direct iteration
of the underlying hash structures is fine.
In the setup path for the memory map in pc_memory_init() split the
operations into two calls. The first, cxl_fmws_set_mmemap(), loops over
fixed memory windows in order and assigns their addresses. The second,
cxl_fmws_update_mmio() actually sets up the mmio for each window.
This is obviously less efficient than a single loop but this split design
is needed to put the logic in two different places in the arm64 support
and it is not a hot enough path to justify an x86 only implementation.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To enable these to be found in a fixed order, that order needs to be known.
This will later be used to sort a list of these structures so that address
map and ACPI table entries are predictable.
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-2-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds AES to max78000_soc
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-12-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit implements AES for the MAX78000
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-11-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds TRNG to max78000_soc
Signed-off-by: Jackson Donaldson
Message-id: 20250704223239.248781-10-jcksn@duck.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit implements the True Random Number
Generator for the MAX78000
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-9-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds the Global Control Register to
max78000_soc
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-8-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit implements the Global Control Register
for the MAX78000
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-7-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds UART to max78000_soc
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <petermaydell@linaro.org>
Message-id: 20250704223239.248781-6-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit implements UART support for the MAX78000
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-5-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds the instruction cache controller
to max78000_soc
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <petermaydell@linaro.org>
Message-id: 20250704223239.248781-4-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit implements the Instruction Cache Controller
for the MAX78000
Signed-off-by: Jackson Donaldson <jcksn@duck.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704223239.248781-3-jcksn@duck.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* sstc extension fixes
* Fix zama16b order in isa_edata_arr
* Profile handling fixes
* Extend PMP region up to 64
* Remove capital 'Z' CPU properties
* Add missing named features
* Support atomic instruction fetch (Ziccif)
* Add max_satp_mode from host cpu
* Extend and configure PMP region count
* Fix PPN field of Translation-reponse register
* Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE
* Fix fcvt.s.bf16 NaN box checking
* Avoid infinite delay of async xmit function
* Device tree reg cleanups
* Add Kunminghu CPU and platform
* Fix missing exit TB flow for ldff_trans
* Fix migration failure when aia is configured as aplic-imsic
* Fix MEPC/SEPC bit masking for IALIGN
* Add a property to set vill bit on reserved usage of vsetvli instruction
* Add Svrsw60t59b extension support
-----BEGIN PGP SIGNATURE-----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=CfRy
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20250704' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 10.1
* sstc extension fixes
* Fix zama16b order in isa_edata_arr
* Profile handling fixes
* Extend PMP region up to 64
* Remove capital 'Z' CPU properties
* Add missing named features
* Support atomic instruction fetch (Ziccif)
* Add max_satp_mode from host cpu
* Extend and configure PMP region count
* Fix PPN field of Translation-reponse register
* Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE
* Fix fcvt.s.bf16 NaN box checking
* Avoid infinite delay of async xmit function
* Device tree reg cleanups
* Add Kunminghu CPU and platform
* Fix missing exit TB flow for ldff_trans
* Fix migration failure when aia is configured as aplic-imsic
* Fix MEPC/SEPC bit masking for IALIGN
* Add a property to set vill bit on reserved usage of vsetvli instruction
* Add Svrsw60t59b extension support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmhntt4ACgkQr3yVEwxT
# gBMaCQ/9E+LeRY59nz3K3XXUw6XLBfaDECXbKzIn0GM1yXeWTX4dB2h2hoGWdu3R
# CRPxWHECN7CeJhd2J23eLfOi+fTUeppJBeR7TcGyoXVC+y0knZv/clQ3OvMFYcgV
# xjzzu1yipQlXwY+kmDZ6qL5up/Q+faw7tRaePZaJheRGYpVRnjoKUZq5fe4Ug4RU
# Xg6Di86eYyk+Jo0g2exvtzy1rX2eBp7Hz200wWiH5Z1B+3NzgMUHrHuJfNAz8zAt
# n8uvruvaLGGtWcQJauRXlAELR6k9tmkfq1Mbqf3FK6muaQCtFD7PXXnjL/rU/z20
# hhxj0psOhBJLd0W5wQ3vLnDf6Wve9zmUdTR9kI0Kt3xUUdfeBuzKcU06F/G8wEsZ
# 2sIYQqt0mxoJboY2lpje7TO4H9gvAf76WBOV10FV2gWsqWu2rZQ6herdq3YZYkHX
# purUTgyjHn4jl2Y3Kzj0Gq1SHo0yaA/sD6xNR8X+JqljSruDxtOFU7wkKBbewoIg
# OSfwemjRUVsPQZ958042ntwJt81v1604Oky8JSFr5eCFx/aoLJ1vDYh7BKZAogNH
# uB/YigGq9+/MVzqJpZI+kZkd+1nzaizeL0FUPRTq0jFA2u+vc3J3svQ/jNXDH2c+
# 5nGuhbkvT0ptmVMBqFV2vjPh6+ScR8t03wHdQ4PmDoXC3o9zbbU=
# =CfRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Jul 2025 07:11:26 EDT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20250704' of https://github.com/alistair23/qemu: (40 commits)
target: riscv: Add Svrsw60t59b extension support
target/riscv: Add a property to set vill bit on reserved usage of vsetvli instruction
tests/tcg/riscv64: Add test for MEPC bit masking
target/riscv: Fix MEPC/SEPC bit masking for IALIGN
migration: Fix migration failure when aia is configured as aplic-imsic
target/riscv: rvv: Fix missing exit TB flow for ldff_trans
hw/riscv: Initial support for BOSC's Xiangshan Kunminghu FPGA prototype
target/riscv: Add BOSC's Xiangshan Kunminghu CPU
hw/riscv/virt: Use setprop_sized_cells for pcie
hw/riscv/virt: Use setprop_sized_cells for iommu
hw/riscv/virt: Use setprop_sized_cells for rtc
hw/riscv/virt: Use setprop_sized_cells for uart
hw/riscv/virt: Use setprop_sized_cells for reset
hw/riscv/virt: Use setprop_sized_cells for virtio
hw/riscv/virt: Use setprop_sized_cells for plic
hw/riscv/virt: Use setprop_sized_cells for aclint
hw/riscv/virt: Use setprop_sized_cells for aplic
hw/riscv/virt: Use setprop_sized_cells for memory
hw/riscv/virt: Use setprop_sized_cells for clint
hw/riscv/virt: Fix clint base address type
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This implementation provides emulation for the Xiangshan Kunminghu
FPGA prototype platform, including support for UART, CLINT, IMSIC,
and APLIC devices. More details can be found at
https://github.com/OpenXiangShan/XiangShan
Signed-off-by: qinshaoqing <qinshaoqing@bosc.ac.cn>
Signed-off-by: Yang Wang <wangyang@bosc.ac.cn>
Signed-off-by: Yu Hu <819258943@qq.com>
Signed-off-by: Ran Wang <wangran@bosc.ac.cn>
Signed-off-by: Borong Huang <3543977024@qq.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250617074222.17618-1-wangran@bosc.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20250703173248.44995-18-philmd@linaro.org>
vfio_cpr_[un]register_container is no longer used since they were
subsumed by container type-specific registration. Delete them.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/1751493538-202042-21-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIO iommufd devices will need access to ioas_id, devid, and hwpt_id in
new QEMU at realize time, so add them to CPR state. Define CprVFIODevice
as the object which holds the state and is serialized to the vmstate file.
Define accessors to copy state between VFIODevice and CprVFIODevice.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/1751493538-202042-15-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Define a list of vfio devices in CPR state, in a subsection so that
older QEMU can be live updated to this version. However, new QEMU
will not be live updateable to old QEMU. This is acceptable because
CPR is not yet commonly used, and updates to older versions are unusual.
The contents of each device object will be defined by the vfio subsystem
in a subsequent patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/1751493538-202042-14-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Register a vfio iommufd container and device for CPR, replacing the generic
CPR register call with a more specific iommufd register call. Add a
blocker if the kernel does not support IOMMU_IOAS_CHANGE_PROCESS.
This is mostly boiler plate. The fields to to saved and restored are added
in subsequent patches.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/1751493538-202042-13-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Define vfio_device_free_name to free the name created by
vfio_device_get_name. A subsequent patch will do more there.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/1751493538-202042-11-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
