Both x-igd-opregion option and legacy mode require identical steps to
set up OpRegion for IGD devices. Consolidate these steps into a single
vfio_pci_igd_setup_opregion function.
The function call in pci.c is wrapped with ifdef temporarily to prevent
build error for non-x86 archs, it will be removed after we decouple it
from legacy mode.
Additionally, move vfio_pci_igd_opregion_init to igd.c to prevent it
from being compiled in non-x86 builds.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-4-tomitamoeko@gmail.com
[ clg: Fixed spelling in vfio_pci_igd_setup_opregion() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Though GTT Stolen Memory (GSM) is right below Data Stolen Memory (DSM)
in host address space, direct access to GSM is prohibited, and it is
not mapped to guest address space. Both host and guest accesses GSM
indirectly through the second half of MMIO BAR0 (GTTMMADR).
Guest firmware only need to reserve a memory region for DSM and program
the BDSM register with the base address of that region, that's actually
what both SeaBIOS[1] and IgdAssignmentDxe does now.
[1] https://gitlab.com/qemu-project/seabios/-/blob/1.12-stable/src/fw/pciinit.c#L319-332
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-3-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The IO BAR4 of IGD devices contains a pair of 32-bit address/data
registers, MMIO_Index (0x0) and MMIO_Data (0x4), which provide access
to the MMIO BAR0 (GTTMMADR) from IO space. These registers are probably
only used by the VBIOS, and are not documented by intel. The observed
layout of MMIO_Index register is:
31 2 1 0
+-------------------------------------------------------------------+
| Offset | Rsvd | Sel |
+-------------------------------------------------------------------+
- Offset: Byte offset in specified region, 4-byte aligned.
- Sel: Region selector
0: MMIO register region (first half of MMIO BAR0)
1: GTT region (second half of MMIO BAR0). Pre Gen11 only.
Currently, QEMU implements a quirk that adjusts the guest Data Stolen
Memory (DSM) region address to be (addr - host BDSM + guest BDSM) when
programming GTT entries via IO BAR4, assuming guest still programs GTT
with host DSM address, which is not the case. Guest's BDSM register is
emulated and initialized to 0 at startup by QEMU, then SeaBIOS programs
its value[1]. As result, the address programmed to GTT entries by VBIOS
running in guest are valid GPA, and this unnecessary adjustment brings
inconsistency.
[1] https://gitlab.com/qemu-project/seabios/-/blob/1.12-stable/src/fw/pciinit.c#L319-332
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-2-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Block drivers assume in their .bdrv_open() implementation that their
state in bs->opaque has been zeroed; it is initially allocated with
g_malloc0() in bdrv_open_driver().
bdrv_snapshot_goto() needs to make sure that it is zeroed again before
calling drv->bdrv_open() to avoid that block drivers use stale values.
One symptom of this bug is VMDK running into a double free when the user
tries to apply an internal snapshot like 'qemu-img snapshot -a test
test.vmdk'. This should be a graceful error because VMDK doesn't support
internal snapshots.
==25507== Invalid free() / delete / delete[] / realloc()
==25507== at 0x484B347: realloc (vg_replace_malloc.c:1801)
==25507== by 0x54B592A: g_realloc (gmem.c:171)
==25507== by 0x1B221D: vmdk_add_extent (../block/vmdk.c:570)
==25507== by 0x1B1084: vmdk_open_sparse (../block/vmdk.c:1059)
==25507== by 0x1AF3D8: vmdk_open (../block/vmdk.c:1371)
==25507== by 0x1A2AE0: bdrv_snapshot_goto (../block/snapshot.c:299)
==25507== by 0x205C77: img_snapshot (../qemu-img.c:3500)
==25507== by 0x58FA087: (below main) (libc_start_call_main.h:58)
==25507== Address 0x832f3e0 is 0 bytes inside a block of size 272 free'd
==25507== at 0x4846B83: free (vg_replace_malloc.c:989)
==25507== by 0x54AEAC4: g_free (gmem.c:208)
==25507== by 0x1AF629: vmdk_close (../block/vmdk.c:2889)
==25507== by 0x1A2A9C: bdrv_snapshot_goto (../block/snapshot.c:290)
==25507== by 0x205C77: img_snapshot (../qemu-img.c:3500)
==25507== by 0x58FA087: (below main) (libc_start_call_main.h:58)
This error was discovered by fuzzing qemu-img.
Cc: qemu-stable@nongnu.org
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2853
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2851
Reported-by: Denis Rastyogin <gerben@altlinux.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250310104858.28221-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit fc4e394b28 removed the last caller of blk_op_is_blocked(). Remove
the now unused function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250206165331.379033-1-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add NVRAM and hint on how to make it persistent. Also update Linux
boot section which should now boot automatically with the new NVRAM
defaults so manual settings in menu may not be needed normally.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250304205926.87E364E6010@zero.eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for -kernel, -initrd and -append command line options.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <489b1be5d95d5153e924c95b0691b8b53f9ffb9e.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Initialise empty NVRAM with default values. This also enables IDE UDMA
mode in AmigaOS that is faster but has to be enabled in environment
due to problems with real hardware but that does not affect emulation
so we can use faster defaults here.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <4d63f88191612329e0ca8102c7c0d4fc626dc372.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The board has a battery backed NVRAM where U-Boot environment is
stored which is also accessed by AmigaOS and e.g. C:NVGetVar command
crashes without it having at least a valid checksum.
[npiggin: 32-bit compile fix]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <7e4c0107ef6bdc2b20fb1e780a188275c7dc1e49.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There's no need to do shift in a loop, doing it in one instruction
works just as well, only the result is used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <446bf740cbb99422be2cc5a31e51a1034eddded7.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The hypervisor is expected to create a value for the HASHPKEY SPR for
each partition. Currently it uses zero for all partitions, use a
random number instead, which in theory might make kernel ROP protection
more secure.
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241219034035.1826173-4-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
A translation that encounters a process table entry that is zero is
something that Linux does to cause certain kernel NULL pointer
dereferences to fault. It is not itself a programming error, so avoid
the guest error log.
Message-ID: <20241219034035.1826173-5-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
From the Freescale PowerPC Architecture Primer:
Alternate time base APU. This APU, implemented on the e500v2, defines
a 64-bit time base counter that differs from the PowerPC defined time
base in that it is not writable and counts at a different, and
typically much higher, frequency. The alternate time base always
counts up, wrapping when the 64-bit count overflows.
This implementation of ATB uses the same frequency as the TB. The
existing spr_read_atbu/l functions are unused without this patch
to wire them into the SPR.
RTEMS uses this SPR on the e6500, though this hasn't been tested.
Message-ID: <20241219034035.1826173-6-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(H)DEC and PURR get reset before icount does, which causes them to be
skewed and not match the init state. This can cause replay to not
match the recorded trace exactly. For DEC and HDEC this is usually not
noticable since they tend to get programmed before affecting the
target machine. PURR has been observed to cause replay bugs when
running Linux.
Fix this by resetting using a time of 0.
Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for reporting Hostwide state counters for nested KVM pseries
guests running with 'cap-nested-papr' on Qemu-TCG acting as
L0-hypervisor. The Hostwide state counters are statistics about state that
L0-hypervisor maintains for the L2-guests and represent the state of all
L2-guests, not just a specific one.
These stats counters are exposed to L1-Hypervisor by the L0-Hypervisor via a
new bit-flag named 'getHostWideState' for the H_GUEST_GET_STATE hcall which
is documented at [1]. Once this flag is set the hcall should populate the
Guest-State-Elements in the requested GSB with the stat counter
values. Currently following five counters are supported:
* l0_guest_heap_size_inuse
* l0_guest_heap_size_max
* l0_guest_pagetable_size_inuse
* l0_guest_pagetable_size_max
* l0_guest_pagetable_reclaimed
At the moment '0' is being reported for all these counters as these
counters doesn't align with how L0-Qemu manages Guest memory.
The patch implements support for these counters by adding new members to
the 'struct SpaprMachineStateNested'. These new members are then plugged
into the existing 'guest_state_element_types[]' with the help of a new
macro 'GSBE_NESTED_MACHINE_DW' together with a new helper
'get_machine_ptr()'. guest_state_request_check() is updated to ensure
correctness of the requested GSB and finally h_guest_getset_state() is
updated to handle the newly introduced flag
'GUEST_STATE_REQUEST_HOST_WIDE'.
This patch is tested with the proposed linux-kernel implementation to
expose these stat-counter as perf-events at [2].
[1]
https://lore.kernel.org/all/20241222140247.174998-2-vaibhav@linux.ibm.com
[2]
https://lore.kernel.org/all/20241222140247.174998-1-vaibhav@linux.ibm.com
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250221155449.530645-1-vaibhav@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As per the PAPR, bit 0 of byte 64 in pa-features property
indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Use KVM_CAP_PPC_DAWR1 capability to find
whether kvm supports 2nd DAWR or not. If it's supported, allow user to set
the pa-feature bit in guest DT using cap-dawr1 machine capability.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708681866.1678.11128625982438367069.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Extend the existing watchpoint facility from TCG DAWR0 emulation
to DAWR1 on POWER10.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708680684.1678.13237334676438770057.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert DIRTY_HPTE() macro as hpte_set_dirty() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-6-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert CLEAN_HPTE() macro as hpte_set_clean() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-5-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE_DIRTY() macro as hpte_is_dirty() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-4-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE_VALID() macro as hpte_is_valid() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-3-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE() macro as hpte_get_ptr() method.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-2-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move helper_attn(), helper_scv() and helper_pminsn() to
tcg-excp_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-15-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In order to move TCG specific code dependent on powerpc_excp()
in the next commit, expose its prototype in "internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-14-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix style in do_rfi() before moving the code around.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-13-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move helpers common to system/user emulation to tcg-excp_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-12-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move exception helpers to tcg-excp_helper.c so they are
only built when TCG is selected. Preprocessor guards
are added for some helpers unused when CONFIG_USER_ONLY.
[npiggin: mention USER_ONLY change]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-10-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduced in commit db789c6cd3 ("ppc: Provide basic
raise_exception_* functions"), raise_exception_ra() has
never been used. Remove as dead code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-9-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Expose powerpc_checkstop() prototype, and move it to
tcg-excp_helper.c, only built when TCG is available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-8-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-7-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-6-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the TCGCPUOps handlers to a new unit: tcg-excp_helper.c,
only built when TCG is selected.
See in target/ppc/cpu_init.c:
#ifdef CONFIG_TCG
static const TCGCPUOps ppc_tcg_ops = {
...
.do_unaligned_access = ppc_cpu_do_unaligned_access,
.do_transaction_failed = ppc_cpu_do_transaction_failed,
.debug_excp_handler = ppc_cpu_debug_excp_handler,
.debug_check_breakpoint = ppc_cpu_debug_check_breakpoint,
.debug_check_watchpoint = ppc_cpu_debug_check_watchpoint,
};
#endif /* CONFIG_TCG */
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-5-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
We are going to move code calling ppc_ldl_code() out of
excp_helper.c where it is defined. Expose its declaration
for few commits, until eventually making it static again
once everything is moved.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-4-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Register RWMR - Region Weighted Mode Register
for privileged access in Power9 and Power10
It controls what the SPURR register produces.
Specs:
- Power10: https://files.openpower.foundation/s/EgCy7C43p2NSRfR
TCG does not model SMT priority, timing, resource controls
and status so this register has no effect for now.
[npiggin: adjust changelog]
Signed-off-by: dan tan <dantan@linux.ibm.com>
Message-ID: <20250116154226.13376-1-dantan@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
KVM handles H_CONFER and does not pass it along to QEMU, so
only vhyp (as used by TCG spapr) needs to handle it.
[npiggin: Add changelog]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-2-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is a possibility that SPI controller can get into loop due to indefinite
RDR match failures. Hence put a limit to failures and stop the sequencer.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-5-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a spi buses with distinct names on each socket so that responders
are attached to correct SPI controllers.
Change the bus name to chipX.spi.<busnum> where X = 0..<num_sockets>
QOM tree on a 2 socket machine:
(qemu) info qom-tree
/machine (powernv10-machine)
/chip[0] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip0.spi.0 (SSI)
/xscom-spi[0] (memory-region)
/chip[1] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip1.spi.0 (SSI)
/xscom-spi[0] (memory-region)
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-4-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use a local variable seq_index instead of repeatedly calling
get_seq_index() method and open-code next_sequencer_fsm().
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-3-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In PnvXferBuffer dynamically allocating and freeing is a
process overhead. Hence used an existing Fifo8 buffer with
capacity of 16 bytes.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-2-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Added new test for pool interrupts. Removed all printfs from pnv-xive2-* qtests.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change all printf() in pnv-xive2-* qtests to g_test_message()
[npiggin: split from pool qtest]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When processing a backlog scan for group interrupts, also take
into account crowd interrupts.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The blk/index in some paths may refer to an NVP or an NVGC. When it
is not known ahead of time, use the nvx_ prefix to prevent confusion.
[npiggin: split out of larger fix patch and reworded]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
XIVE crowd sizes are encoded into a 2-bit field as follows:
0: 0b00
2: 0b01
4: 0b10
16: 0b11
A crowd size of 8 is not supported.
If an END is defined with the 'crowd' bit set, then a target can be
running on different blocks. It means that some bits from the block
VP are masked when looking for a match. It is similar to groups, but
on the block instead of the VP index.
Most of the changes are due to passing the extra argument 'crowd' all
the way to the function checking for matches.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add XIVE2 tests for group interrupts and group interrupts that have
been backlogged.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When the hypervisor or OS pushes a new value to the CPPR, if the LSMFB
value is lower than the new CPPR value, there could be a pending group
interrupt in the backlog, so it needs to be scanned.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When pushing an OS context, we were already checking if there was a
pending interrupt in the IPB and sending a notification if needed. We
also need to check if there is a pending group interrupt stored in the
NVG table. To avoid useless backlog scans, we only scan if the NVP
belongs to a group.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
