This is an incremental step in converting vmstate loading
code to report error via Error objects instead of directly
printing it to console/monitor.
It is ensured that vmstate_load_state() must report an error
in errp, in case of failure.
The errors are temporarily reported using error_report_err().
This is removed in the subsequent patches in this series,
when we are actually able to propagate the error to the calling
function using errp. Whereas, if we want the function to exit on
error, then error_fatal is passed.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Arun Menon <armenon@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250918-propagate_tpm_error-v14-2-36f11a6fb9d3@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Define a function to create a QTestState object representing the state
of QEMU after old QEMU exec's new QEMU. This is needed for testing
the cpr-exec migration mode.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/1759332851-370353-14-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Allow the qtest_qemu_spawn caller to pass the function to be called
to perform the spawn. The opaque argument is needed by a new spawn
function in a subsequent patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/1759332851-370353-13-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Define an accessor that returns all the arguments used to exec QEMU.
Collect the arguments that were passed to qtest_spawn_qemu, plus the trace
arguments that were composed inside qtest_spawn_qemu, and move them to a
new function qtest_qemu_args.
This will be needed to test the cpr-exec migration mode.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/1759332851-370353-11-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
qtest_get_machines returns the machines supported by the QEMU binary
described by an environment variable and caches the result. If the
next call to qtest_get_machines passes the same variable name, the cached
result is returned, but if the name changes, the caching is defeated.
To make caching more effective, remember the path of the QEMU binary
instead. Different env vars, eg QTEST_QEMU_BINARY_SRC and
QTEST_QEMU_BINARY_DST, usually resolve to the same path.
Before the optimization, the test /x86_64/migration/precopy/unix/plain
exec's QEMU and calls query-machines 3 times. After optimization, that
only happens once. This does not significantly speed up the tests, but
it reduces QTEST_LOG output, and launches fewer QEMU instances, making
it easier to debug problems.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <87h5ymdzrf.fsf@pond.sub.org>
Link: https://lore.kernel.org/qemu-devel/1758290310-349623-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When QEMU has been compiled with "--without-default-devices", the
migration cpr-tests are currently failing since the first test leaves
a socket file behind that avoids that the second test can be initialized
correctly. Make sure that we delete the socket file in case that the
migrate_start() failed due to the missing machine.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250930090932.235151-1-thuth@redhat.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When QEMU has been compiled with "--without-default-devices", the
machines might not be available in the binary. Let's properly check
for the machines before running the tests to avoid that they are
failing in this case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250930090444.234431-1-thuth@redhat.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The syslog backend needs the syslog function from libc and the LOG_INFO enum
value; they are re-exported as "::trace::syslog" and "::trace::LOG_INFO"
so that device crates do not all have to add the libc dependency, but
otherwise there is nothing special.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-17-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use CHECK_TRACE_EVENT_GET_STATE in log, syslog, dtrace and simple
backend, so that the "if (trace_event_get_state)" is created from common
code and unified when multiple backends are active.
When a single backend is active there is no code change (except
for the log backend, as shown in tests/tracetool/log.h), but the
code in the backends is simpler.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250929154938.594389-8-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the Python code and reduces the size of the tracepoints.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250929154938.594389-6-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We added @error_warn some two years ago in commit 3ffef1a55c (error:
add global &error_warn destination). It has multiple issues:
* error.h's big comment was not updated for it.
* Function contracts were not updated for it.
* ERRP_GUARD() is unaware of @error_warn, and fails to mask it from
error_prepend() and such. These crash on @error_warn, as pointed
out by Akihiko Odaki.
All fixable. However, after more than two years, we had just of 15
uses, of which the last few patches removed seven as unclean or
otherwise undesirable, adding back five elsewhere. I didn't look
closely enough at the remaining seven to decide whether they are
desirable or not.
I don't think this feature earns its keep. Drop it.
Thanks-to: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20250923091000.3180122-14-armbru@redhat.com>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
riscv64 is now a supported architecture.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250924120426.2158655-17-marcandre.lureau@redhat.com>
Some distros/targets may pull it by default, but some don't.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250924120426.2158655-16-marcandre.lureau@redhat.com>
Newer lcitool version has various fixes helping QEMU CI and this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250924120426.2158655-13-marcandre.lureau@redhat.com>
Without it, at least it fails with podman on fc42:
[1/6] STEP 1/15: FROM emscripten/emsdk:3.1.50 AS build-base
Error: creating build container: short-name resolution enforced but cannot prompt without a TTY
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Message-ID: <20250924120426.2158655-10-marcandre.lureau@redhat.com>
Implement a bash version of rust-bindgen rust_to_clang_target() to
convert from rust target to clang target.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250924120426.2158655-8-marcandre.lureau@redhat.com>
* Introduce a new ASPEED OTP memory device model integrated with the
Secure Boot Controller. It includes a new block device backend
('drive' property), is enabled for AST2600 SoCs and AST1030 SoCs.
Functional tests are included
* Changed "ast2700-evb" alias to point to the "ast2700a1-evb" machine
* Introduce support for Aspeed PCIe host controller, including models
for the PCIe Root Complex, Root Port, and PHY. Enabled for the
AST2600 and AST2700 SoCs, and functional tests are included
* Refactor Boot ROM support to improve code reuse across the different
Aspeed machine. This is in preparation of vbootrom support in the
ast2700fc machine
* Improved Error Handling in the AST27x0-fc machine init functions
-----BEGIN PGP SIGNATURE-----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=7BzG
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20250929' of https://github.com/legoater/qemu into staging
aspeed queue:
* Introduce a new ASPEED OTP memory device model integrated with the
Secure Boot Controller. It includes a new block device backend
('drive' property), is enabled for AST2600 SoCs and AST1030 SoCs.
Functional tests are included
* Changed "ast2700-evb" alias to point to the "ast2700a1-evb" machine
* Introduce support for Aspeed PCIe host controller, including models
for the PCIe Root Complex, Root Port, and PHY. Enabled for the
AST2600 and AST2700 SoCs, and functional tests are included
* Refactor Boot ROM support to improve code reuse across the different
Aspeed machine. This is in preparation of vbootrom support in the
ast2700fc machine
* Improved Error Handling in the AST27x0-fc machine init functions
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmjauRoACgkQUaNDx8/7
# 7KGAxA//YdPPGf8vKhPeblUt0/3760GGhI17TBWJFVZP/aZYcIiE0oRxo5zH0Lne
# YjwFKTtx7GXzbE2wqVCLSt/VPDAEMk6wZGwGvMbmeydssyNjbPuF79+EVYnFsUrQ
# Zkm8YPf/qFcKYFxp8O5GTKedAu70AFDMkFwy2xuBRqE5v0RQJe20+EHaiEC8S+3a
# z5PIZJ74J3m4d+h+BlIHoiPe7hwTiyQ8V4rrWKWupwqDBExZfgNGX0zGPZDOlwOo
# bpV38gb0ugyG93/FJSXyXQqiiH5h+10CaSzc1QuytYtQXAM2qj60Kh86YruTsbLu
# g3TUz+jOgDatTk/MhH8q/gtwDjmqcygGeybbMJZeCzhq1qLIFgJW2KwPNwj8eHCd
# 7jZp6NT9GekVMB+FghApWjc63EozKveJ3wzyHE481GGF7TgvuVF1Km+dVHNPjpBz
# pjXgIeKmDl0hmgGp3Se9S8B1ryWK3+KvuNoKe63UK/NMCkSXF3xTerkU1evJjIrp
# B9Tus7kLRqbDGWPyprp1d7Jv6MKJ6sELKvGHlalMcnzo4vAvQu1RB5s1kYqsCGlY
# 414Bc2v/YdkLxQGU6hCp1rABq3sIdWVzxRJ4c0XalRNZBkOmlsy1p5FaG5RXQdhz
# Gm27nzDAWBeNmWD6Jjjj6VwWmqBbSO4M4mYVTMnTfEaO7y/l1d4=
# =7BzG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 29 Sep 2025 09:51:38 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
* tag 'pull-aspeed-20250929' of https://github.com/legoater/qemu: (32 commits)
hw/arm/aspeed_ast27x0-fc: Make sub-init functions return bool with errp
hw/arm/aspeed_ast27x0-fc: Drop dead return checks
hw/arm/aspeed: Move aspeed_load_vbootrom to common SoC code
hw/arm/aspeed: Move aspeed_install_boot_rom to common SoC code
hw/arm/aspeed: Move write_boot_rom to common SoC code
hw/arm/aspeed: Move aspeed_board_init_flashes() to common SoC code
tests/functional/arm/test_aspeed_ast2600: Add PCIe and network test
hw/arm/aspeed_ast27x0: Introduce 3 PCIe RCs for AST2700
hw/pci-host/aspeed: Disable Root Device and place Root Port at 00:00.0 to AST2700
hw/pci-host/aspeed: Add AST2700 PCIe config with dedicated H2X blocks
hw/pci-host/aspeed: Add AST2700 PCIe PHY
hw/arm/aspeed_ast2600: Add PCIe RC support (RC_H only)
hw/arm/aspeed: Wire up PCIe devices in SoC model
hw/pci-host/aspeed: Add MSI support and per-RC IOMMU address space
hw/pci-host/aspeed: Add AST2600 PCIe Root Port and make address configurable
hw/pci-host/aspeed: Add AST2600 PCIe Root Device support
hw/pci-host/aspeed: Add AST2600 PCIe config space and host bridge
hw/pci-host/aspeed: Add AST2600 PCIe PHY model
hw/pci/pci_ids: Add PCI vendor ID for ASPEED
tests/functional/arm: Add AST2600 boot test with generated OTP image
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend the AST2600 functional tests with PCIe and network checks.
This patch introduces a new helper "do_ast2600_pcie_test()" that runs "lspci"
on the emulated system and verifies the presence of the expected PCIe devices:
- 80:00.0 Host bridge: ASPEED Technology, Inc. Device 2600
- 80:08.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
- 81:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
To exercise the PCIe network device, the test adds:
-device e1000e,netdev=net1,bus=pcie.0
-netdev user,id=net1
and assigns an IP address to the interface, verifying it with `ip addr`.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-14-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a functional test that boots an AST2600 machine with a generated
OTP image. The test verifies that OTP contents are read during early
boot and that the system reaches the expected console prompt.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-4-kane_chen@aspeedtech.com
[ clg: checkpath fixes ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a functional test that boots an AST1030 machine with a generated
OTP image. The test verifies that OTP contents are read during early
boot and that the system reaches the expected console prompt.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-3-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a small helper that generates OTP images at test time. This lets
multiple test cases create default OTP contents without shipping prebuilt
fixtures and keeps the tests self-contained.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-2-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch moves the "ast2700-evb" alias from the A0 to A1.
The A0 machine remains available via its explicit name
("ast2700a0-evb"), while functional tests are updated to
target A0 by name instead of relying on the generic alias.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250902062550.3797040-1-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Adds a functional test for the IBM PPE42 instructions which
downloads a test image from a public github repo and then
loads and executes the image.
(see https://github.com/milesg-github/ppe42-tests for details)
Test status is checked by periodically issuing 'info register'
commands and checking the NIP value. If the NIP is 0xFFF80200
then the test successfully executed to completion. If the
machine stops before the test completes or if a 90 second
timeout is reached, then the test is marked as having failed.
This test does not test any PowerPC instructions as it is
expected that these instructions are well covered in other
tests. Only instructions that are unique to the IBM PPE42
processor are tested.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-10-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-10-milesg@linux.ibm.com>
With all Power11 support in place, add Power11 PowerNV test.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-9-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-9-adityag@linux.ibm.com>
As op-build images haven't been updated from long time (and may not get
updated in future), use buildroot images provided by cedric [1].
Use existing nvme device being used in the test to mount the initrd.
Also replace the check for "zImage loaded message" to skiboot's message
when it starts the kernel: "Starting kernel at", since we are no longer
using zImage from op-build
This is required for newer processor tests such as Power11, as the
op-build kernel image is old and doesn't support Power11.
Power11 test has been added in a later patch.
[1]: https://github.com/legoater/qemu-ppc-boot/tree/main/buildroot/qemu_ppc64le_powernv8-2025.02
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-8-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-8-adityag@linux.ibm.com>
Add a basic test of the vfio-user PCI client implementation.
Co-authored-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250911210905.2070474-1-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
* New functional tests for CD-ROM boot on hppa
* Skip functional tests on more exotic network errors, too
* Fix another issue with htags in the gitlab CI
* Some additional minor fixes to various functional tests
-----BEGIN PGP SIGNATURE-----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=RTPq
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-09-24' of https://gitlab.com/thuth/qemu into staging
* New functional tests to check via the vmstate-static-checker.py script
* New functional tests for CD-ROM boot on hppa
* Skip functional tests on more exotic network errors, too
* Fix another issue with htags in the gitlab CI
* Some additional minor fixes to various functional tests
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCgAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmjTkIkRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUZCA/9Fb3bVlK108aD5ipuMLlgsXlRI+leEQC6
# h8BJgrb1GvYLlxEguHZJcSIxQN0F6TZsj31xWjpsSMNQro7tbmBcDZtj9FkCrAuG
# E99tG67A6RCTeFbqCfi19QlU9C0UOhJPPEkzZ56D+jik9NJKSG0fM0OFVEt0vBEt
# NLFrfOS6Tgc4XP6qXDXQ7v61SldZtJdDEvkMo2CkXqxu8pDz4vw8G6CSMWPfCH5v
# vkZydxLw38mkp8OtGX/tYiGn5s7/N59B29nlDkfuyOaJXjjKb+kid1XE58Y5R3Lm
# FYEuyGYgOcycH/hLiFtAFQpYYxy2yrbaHnySCP/GkMftmynz2w49hCvXca6gtcxO
# MFwzxdzDkGpPGhgANP9P3xNuZceObq6nKOdlo/tI5vG3rQp5V/n6A8T3JWIWgRHd
# 71HNPYlLf53lYLbiOPAZ9SRaPjElcnJoIF0jrplOWfz8vo1NzanPV4MMOw480uFW
# HDD77dZWrFTox1Unmv1E/TS/85h5b93dbnG9XRiUUn+k8TGtBA71kDme2KEdTZzw
# 3eNkOHUyc6RIwaSjBHWKOfXsaxa9EmS33dfg/jiJ9EpyGie30/faGhK1SiMr9HEp
# 35s4qcpFE71eZKRqXojv8XQJmc5uRCIa30MWGwl0QoU1XaLrF2NUEPECdZRNOBCO
# Jrb+UWMEIsE=
# =RTPq
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Sep 2025 11:32:41 PM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [unknown]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [unknown]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-09-24' of https://gitlab.com/thuth/qemu:
tests/functional: treat unknown exceptions as transient faults
tests/functional: retry when seeing ConnectionError exception
tests: Fix "make check-functional" for targets without thorough tests
tests/functional/hppa: Add a CD-ROM boot test for qemu-system-hppa
.gitlab-ci.d/buildtest.yml: Unset CI_COMMIT_DESCRIPTION for htags
tests/functional: use self.log for all logging
tests/functional: Use vmstate-static-checker.py to test data from v7.2
tests/data/vmstate-static-checker: Add dump files from QEMU 7.2.17
tests/functional: Test whether the vmstate-static-checker script works fine
tests: Move the old vmstate-static-checker files to tests/data/
tests/functional/s390x/test_pxelinux: Fix warnings from pylint
tests/functional/m68k: Use proper polling in the next-cube test
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To maximise the robustness of the functional tests we want to treat most
asset download failures as non-fatal to the test suite. Instead it
should just skip the tests which need that particular asset. The only
time aim to make it fatal is for 404 errors which are highly likely to
reflect genuine problems to be fixed.
We catch certain exception classes and handle them as transient errors,
but unfortunately it is proving difficult to predict what exception
classes urlopen() is capable of raising, with new possibilities being
discovered.
To provide a fail-safe, treat the generic Exception class as being a
transient error too. This may well mask certain genuine bugs, but it is
preferrable to prioritize running the test suite to the greatest extent
practical.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250918125746.1165658-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This base class is used for many different socket connection
errors, corresponding to ECONNRESET, ECONNREFUSED, ECONNABORTED
and more. Most of these are things you might expect to see every
now and then as transient flaws. We should thus retry the asset
download when seeing them.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250918125746.1165658-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
