* Fixed endianness of VFIO device state packets
* Improved IGD passthrough support with legacy mode
* Improved build
* Added support for old AMD GPUs (x550)
* Updated property documentation
-----BEGIN PGP SIGNATURE-----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=Vh0m
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20250311' of https://github.com/legoater/qemu into staging
vfio queue:
* Fixed endianness of VFIO device state packets
* Improved IGD passthrough support with legacy mode
* Improved build
* Added support for old AMD GPUs (x550)
* Updated property documentation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmfQfQcACgkQUaNDx8/7
# 7KEUNw/+PjFpHrz5muQ8itkbyd36eJJdcxCl+9IPIWfnUfB582epkLcgvWyswGUo
# krFTregoRG0PKtgZDtv95owGtVJOgK6XYFadGHiYkvvsb41twOYsP7/SuI+KMiEv
# IDFLMvCTyorSIIoEF8i2EexfGPRV1VoWwvBoHgRRmYlzwzXnufjABpoZ0a25DTye
# DQ4yhSfqoIh1gOcdL9tPictnZg9OxKr2ePXNdrtymtEIhg3ZobD3Jd8J4WCcsfKT
# fxxBO5NsGgA8oM7i02fYN9kgMwqTnVhSAu1wq9PXsbrnNXam+trywAWSO6CjL+rV
# ++STWNSrRoHzuotRBr7BzrTpTFyQyfwBWqUT5L4NlhgXB3Xybk+M6Zj08Yva8pjE
# w78JQKvKp54gU34AWBW0/J6+u3v+iE8l1Eywx6xueF9Q+YSUDeW9B1LDdjFJryhF
# d8j3J+vuglbdsp05D+tVErf5cqFvFDfrjTkXkZNtmx7wky45XS9ZvNazYW1KI3f9
# bg8Wjb7ZujuvxpSjycPRZzdKa8kqSgSZg7fg91Wimiy1Iqe3SZVVWNchLYiPp8Dm
# nXMfOEpVHQZ1vzeo7dVWyxu9Y1ujgvUQy8kMa9q2W2S7HQ5Sna79n7eMVJxqZQ4G
# m0ETFToOcPPOnZBWgqNOSUlSQncFuIVgNTDvycQ9dMhGorYcBDI=
# =Vh0m
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Mar 2025 02:12:23 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20250311' of https://github.com/legoater/qemu: (21 commits)
vfio/pci: Drop debug commentary from x-device-dirty-page-tracking
vfio/pci-quirks: Exclude non-ioport BAR from ATI quirk
hw/vfio: Compile display.c once
hw/vfio: Compile iommufd.c once
hw/vfio: Compile more objects once
hw/vfio: Compile some common objects once
hw/vfio/common: Get target page size using runtime helpers
hw/vfio/common: Include missing 'system/tcg.h' header
hw/vfio/spapr: Do not include <linux/kvm.h>
system: Declare qemu_[min/max]rampagesize() in 'system/hostmem.h'
vfio/migration: Use BE byte order for device state wire packets
vfio/igd: Fix broken KVMGT OpRegion support
vfio/igd: Introduce x-igd-lpc option for LPC bridge ID quirk
vfio/igd: Handle x-igd-opregion option in config quirk
vfio/igd: Decouple common quirks from legacy mode
vfio/igd: Refactor vfio_probe_igd_bar4_quirk into pci config quirk
vfio/pci: Add placeholder for device-specific config space quirks
vfio/igd: Move LPC bridge initialization to a separate function
vfio/igd: Consolidate OpRegion initialization into a single function
vfio/igd: Do not include GTT stolen size in etc/igd-bdsm-size
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The interrupt enable registers are not reset to 0 on Freescale eSDHC
but some bits are enabled on reset. At least some U-Boot versions seem
to expect this and not initialise these registers before expecting
interrupts. Use existing vendor property for Freescale eSDHC and set
the reset value of the interrupt registers to match Freescale
documentation.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20250210160329.DDA7F4E600E@zero.eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both qemu_minrampagesize() and qemu_maxrampagesize() are
related to host memory backends, having the following call
stack:
qemu_minrampagesize()
-> find_min_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
qemu_maxrampagesize()
-> find_max_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
Having TYPE_MEMORY_BACKEND defined in "system/hostmem.h":
include/system/hostmem.h:23:#define TYPE_MEMORY_BACKEND "memory-backend"
Move their prototype declaration to "system/hostmem.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20250308230917.18907-7-philmd@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250311085743.21724-2-philmd@linaro.org
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add support for -kernel, -initrd and -append command line options.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <489b1be5d95d5153e924c95b0691b8b53f9ffb9e.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Initialise empty NVRAM with default values. This also enables IDE UDMA
mode in AmigaOS that is faster but has to be enabled in environment
due to problems with real hardware but that does not affect emulation
so we can use faster defaults here.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <4d63f88191612329e0ca8102c7c0d4fc626dc372.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The board has a battery backed NVRAM where U-Boot environment is
stored which is also accessed by AmigaOS and e.g. C:NVGetVar command
crashes without it having at least a valid checksum.
[npiggin: 32-bit compile fix]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <7e4c0107ef6bdc2b20fb1e780a188275c7dc1e49.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There's no need to do shift in a loop, doing it in one instruction
works just as well, only the result is used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <446bf740cbb99422be2cc5a31e51a1034eddded7.1740673173.git.balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The hypervisor is expected to create a value for the HASHPKEY SPR for
each partition. Currently it uses zero for all partitions, use a
random number instead, which in theory might make kernel ROP protection
more secure.
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241219034035.1826173-4-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(H)DEC and PURR get reset before icount does, which causes them to be
skewed and not match the init state. This can cause replay to not
match the recorded trace exactly. For DEC and HDEC this is usually not
noticable since they tend to get programmed before affecting the
target machine. PURR has been observed to cause replay bugs when
running Linux.
Fix this by resetting using a time of 0.
Message-ID: <20241219034035.1826173-2-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for reporting Hostwide state counters for nested KVM pseries
guests running with 'cap-nested-papr' on Qemu-TCG acting as
L0-hypervisor. The Hostwide state counters are statistics about state that
L0-hypervisor maintains for the L2-guests and represent the state of all
L2-guests, not just a specific one.
These stats counters are exposed to L1-Hypervisor by the L0-Hypervisor via a
new bit-flag named 'getHostWideState' for the H_GUEST_GET_STATE hcall which
is documented at [1]. Once this flag is set the hcall should populate the
Guest-State-Elements in the requested GSB with the stat counter
values. Currently following five counters are supported:
* l0_guest_heap_size_inuse
* l0_guest_heap_size_max
* l0_guest_pagetable_size_inuse
* l0_guest_pagetable_size_max
* l0_guest_pagetable_reclaimed
At the moment '0' is being reported for all these counters as these
counters doesn't align with how L0-Qemu manages Guest memory.
The patch implements support for these counters by adding new members to
the 'struct SpaprMachineStateNested'. These new members are then plugged
into the existing 'guest_state_element_types[]' with the help of a new
macro 'GSBE_NESTED_MACHINE_DW' together with a new helper
'get_machine_ptr()'. guest_state_request_check() is updated to ensure
correctness of the requested GSB and finally h_guest_getset_state() is
updated to handle the newly introduced flag
'GUEST_STATE_REQUEST_HOST_WIDE'.
This patch is tested with the proposed linux-kernel implementation to
expose these stat-counter as perf-events at [2].
[1]
https://lore.kernel.org/all/20241222140247.174998-2-vaibhav@linux.ibm.com
[2]
https://lore.kernel.org/all/20241222140247.174998-1-vaibhav@linux.ibm.com
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250221155449.530645-1-vaibhav@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As per the PAPR, bit 0 of byte 64 in pa-features property
indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Use KVM_CAP_PPC_DAWR1 capability to find
whether kvm supports 2nd DAWR or not. If it's supported, allow user to set
the pa-feature bit in guest DT using cap-dawr1 machine capability.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708681866.1678.11128625982438367069.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert DIRTY_HPTE() macro as hpte_set_dirty() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-6-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert CLEAN_HPTE() macro as hpte_set_clean() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-5-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE_DIRTY() macro as hpte_is_dirty() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-4-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE_VALID() macro as hpte_is_valid() method.
sPAPR data structures including the hash page table are big-endian
regardless of current CPU endian mode, so use the big-endian LD/ST
API to access the hash PTEs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-3-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Convert HPTE() macro as hpte_get_ptr() method.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20241220213103.6314-2-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
KVM handles H_CONFER and does not pass it along to QEMU, so
only vhyp (as used by TCG spapr) needs to handle it.
[npiggin: Add changelog]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-2-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a spi buses with distinct names on each socket so that responders
are attached to correct SPI controllers.
Change the bus name to chipX.spi.<busnum> where X = 0..<num_sockets>
QOM tree on a 2 socket machine:
(qemu) info qom-tree
/machine (powernv10-machine)
/chip[0] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip0.spi.0 (SSI)
/xscom-spi[0] (memory-region)
/chip[1] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip1.spi.0 (SSI)
/xscom-spi[0] (memory-region)
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-4-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
XIVE crowd sizes are encoded into a 2-bit field as follows:
0: 0b00
2: 0b01
4: 0b10
16: 0b11
A crowd size of 8 is not supported.
If an END is defined with the 'crowd' bit set, then a target can be
running on different blocks. It means that some bits from the block
VP are masked when looking for a match. It is similar to groups, but
on the block instead of the VP index.
Most of the changes are due to passing the extra argument 'crowd' all
the way to the function checking for matches.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When a group interrupt cannot be delivered, we need to:
- increment the backlog counter for the group in the NVG table
(if the END is configured to keep a backlog).
- start a broadcast operation to set the LSMFB field on matching CPUs
which can't take the interrupt now because they're running at too
high a priority.
[npiggin: squash in fixes from milesg]
[milesg: only load the NVP if the END is !ignore]
[milesg: always broadcast backlog, not only when there are precluded VPs]
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The BMC HIOMAP PNOR access protocol has certain limits on PNOR addresses
and sizes. Add some sanity checks for these so we don't get strange
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LPC FW address space is a 256MB (28-bit) region to one of 16-devices
that are selected with the IDSEL register. Implement this by making
the ISA FW address space 4GB, and move the 256MB OPB alias within
that space according to IDSEL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If nothing responds to an LPC access, the LPC host controller should
set an IRQSTAT error. Model this behaviour.
skiboot uses this error to "probe" LPC accesses, among other things to
determine if a SuperIO chip is present. After this change it recognizes
there is no SuperIO present and does not keep trying to access it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The LPC model has only supported serirqs (ISA device IRQs), however
there are internal sources that can raise other interrupts. Update the
device to handle these interrupt sources.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The OCC is an On Chip Controller that handles various thermal and power
management. It is a PPC405 microcontroller that runs its own firmware
which is out of scope of the powernv machine model. Some dynamic
behaviour and interfaces that are important for host CPU testing can be
implemented with a much simpler state machine.
This change adds a 100ms timer that ticks through a simple state machine
that looks for "OCC command requests" coming from host firmware, and
responds to them.
For now the powercap command is implemented because that is used by
OPAL and exported to Linux and is easy to test.
$ F=/sys/firmware/opal/powercap/system-powercap/powercap-current
$ cat $F
100
$ echo 50 | sudo tee $F
50
$ cat $F
50
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
OCC pstate frequencies are in kHz, so the OCC data was 3-4MHz. Upgrade
to GHz. Make each pstate have a different frequency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use defines for the OCCMISC register bits, and add a comment about the
IRQ request bit, which QEMU may not model quite correctly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Put HOMER memory region base and size into the class, to allow more
code-reuse between different machines in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The commit to fix the OCC common area sensor mappings didn't update the
register offsets to match.
Before this change, skiboot reports:
[ 0.347100086,3] OCC: Chip 0 sensor data invalid
Afterward, there is no error and the sensor_groups directory appears
under /sys/firmware/opal/.
The SLW_IMAGE_BASE address looks like a workaround to intercept firmware
memory accesses, but that does not seem to be required now (and would
have been broken by the OCC common area region mapping change anyway).
So it can be removed.
Fixes: 3a1b70b66b ("ppc/pnv: Fix OCC common area region mapping")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
HOMER memory implements some dummy registers that return a nonsense
value to satisfy skiboot accesses caused by "SLW" init and register
save/restore programming that has never worked under QEMU:
[ 0.265000943,3] SLW: Failed to set HRMOR for CPU 0,RC=0x1
[ 0.265356988,3] Disabling deep stop states
To simplify a later change to implement HOMER as a RAM area, make
these return zero, which has the same result.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER OCC registers seem to have bitrotted and fail for various
reasons on powernv8, 9, and 10.
The major problems are that POWER8 has the wrong version value and its
pstate ordering is incorrect. POWER9/10 have not set the OCC state to
active. Non-zero chips are also set to OCC slaves for POWER9/10.
Unfortunately skiboot has also bitrotted and requires fixes that are
not yet in the bios files to run. With a patched skiboot, before this
change, powernv9/10 report:
[ 0.262050394,3] OCC: Chip: 0: OCC not active
[ 0.262128603,3] OCC: Initialization on all chips did not complete(timed out)
powernv8 reports:
[ 0.173572100,3] OCC: Unknown OCC-OPAL interface version.
[ 0.173812059,3] OCC: Initialization on all chips did not complete(timed out)
After this patch, all report:
[ 0.176815668,5] OCC: All Chip Rdy after 0 ms
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Each non-core chiplet on a chip has a "pervasive chiplet" unit and its
xscom register set. This adds support for PHB4/5.
skiboot reads the CPLT_CONF1 register in __phb4/5_get_max_link_width(),
which shows up as unimplemented xscom reads. Set a value in PCI CONF1
register's link-width field to demonstrate skiboot doing something
interesting with it.
In the bigger picture, it might be better to model the pervasive
chiplet type as parent that each non-core chiplet model derives from.
For now this is enough to get the PHB registers implemented and working
for skiboot, and provides a second example (after the N1 chiplet) that
will help if the design is reworked as such.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is the only PPC 405 machine. Drop all support by
removing the SoC and associated devices as-well as the machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-3-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict the tb_flush() call to TCG. Assert we are using KVM or TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20250127102620.39159-3-philmd@linaro.org>
Currently we handle the 'dumpdtb' machine sub-option ad-hoc in every
board model that has an FDT. It's up to the board code to make sure
it calls qemu_fdt_dumpdtb() in the right place.
This means we're inconsistent and often just ignore the user's
command line argument:
* if the board doesn't have an FDT at all
* if the board supports FDT, but there happens not to be one
present (usually because of a missing -fdt option)
This isn't very helpful because it gives the user no clue why their
option was ignored.
However, in order to support the QMP/HMP dumpdtb commands we require
now that every FDT machine stores a pointer to the FDT in
MachineState::fdt. This means we can handle -machine dumpdtb
centrally by calling the qmp_dumpdtb() function, unifying its
handling with the QMP/HMP commands. All the board code calls to
qemu_fdt_dumpdtb() can then be removed.
For this commit we retain the existing behaviour that if there
is no FDT we silently ignore the -machine dumpdtb option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-2-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF and hidden from the guest.
Do not create DT when starting the system and also keep the disabled PCI
device not linked to DRC, which generates DT in case of hotplug.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-1-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-5-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-3-philmd@linaro.org>
A number of machines create an if=sd drive by default even though
they lack an SD bus, and therefore cannot use the drive.
This drive is created when the machine sets flag
@auto_create_sdcard.
See for example running HMP "info block" on the HPPA C3700 machine:
$ qemu-system-hppa -M C3700 -monitor stdio -S
(qemu) info block
floppy0: [not inserted]
Removable device: not locked, tray closed
sd0: [not inserted]
Removable device: not locked, tray closed
$ qemu-system-hppa -M C3700 -sd /bin/sh
qemu-system-hppa: -sd /bin/sh: machine type does not support if=sd,bus=0,unit=0
Delete that from machines that lack an SD bus.
Note, only the ARM and RISCV targets use such feature:
$ git grep -wl IF_SD hw | cut -d/ -f-2 | sort -u
hw/arm
hw/riscv
$
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-5-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
