In the A32 decoder, use FPST_A64_F16 rather than FPST_FPCR_F16.
By doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR_F16(?!_)/FPST_A64_F16/g' target/arm/tcg/translate-{a64,sve,sme}.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-18-peter.maydell@linaro.org
In the A32 decoder, use FPST_A32_F16 rather than FPST_FPCR_F16.
By doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR_F16(?!_)/FPST_A32_F16/g' target/arm/tcg/translate-vfp.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-17-peter.maydell@linaro.org
We directly use fp_status_f16 in a handful of helpers that are
AArch64-specific; switch to fp_status_f16_a64 for these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-16-peter.maydell@linaro.org
We directly use fp_status_f16 in a handful of helpers that
are AArch32-specific; switch to fp_status_f16_a32 for these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-15-peter.maydell@linaro.org
As the first part of splitting the existing fp_status_f16
into separate float_status fields for AArch32 and AArch64
(so that we can make FEAT_AFP control bits apply only
for AArch64), define the two new fp_status_f16_a32 and
fp_status_f16_a64 fields, but don't use them yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-14-peter.maydell@linaro.org
Now we have moved all the uses of vfp.fp_status and FPST_FPCR
to either the A32 or A64 fields, we can remove these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-13-peter.maydell@linaro.org
In the A64 decoder, use FPST_A64 rather than FPST_FPCR. By
doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR(?!_)/FPST_A64/g' target/arm/tcg/translate-{a64,sve,sme}.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-12-peter.maydell@linaro.org
In the A32 decoder, use FPST_A32 rather than FPST_FPCR. By
doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR(?!_)/FPST_A32/g' target/arm/tcg/translate-vfp.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-11-peter.maydell@linaro.org
The helpers vfp_cmps, vfp_cmpes, vfp_cmpd, vfp_cmped are used only from
the A32 decoder; the A64 decoder uses separate vfp_cmps_a64 etc helpers
(because for A64 we update the main NZCV flags and for A32 we update
the FPSCR NZCV flags). So we can make these helpers use the fp_status_a32
field instead of fp_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-10-peter.maydell@linaro.org
Use fp_status_a32 in the vjcvt helper function; this is called only
from the A32/T32 decoder and is not used inside a
set_rmode/restore_rmode sequence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-9-peter.maydell@linaro.org
In is_ebf(), we might be called for A64 or A32, but we have
the CPUARMState* so we can select fp_status_a64 or
fp_status_a32 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch from vfp.fp_status to vfp.fp_status_a64 for helpers which:
* directly reference an fp_status field
* are called only from the A64 decoder
* are not called inside a set_rmode/restore_rmode sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250124162836.2332150-8-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We want to split the existing fp_status in the Arm CPUState into
separate float_status fields for AArch32 and AArch64. (This is
because new control bits defined by FEAT_AFP only have an effect for
AArch64, not AArch32.) To make this split we will:
* define new fp_status_a32 and fp_status_a64 which have
identical behaviour to the existing fp_status
* move existing uses of fp_status to fp_status_a32 or
fp_status_a64 as appropriate
* delete the old fp_status when it has no uses left
In this patch we add the new float_status fields.
We will also need to split fp_status_f16, but we will do that
as a separate series of patches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-7-peter.maydell@linaro.org
In vfp_exceptbits_from_host(), we accumulate the FPSR flags in
an "int", and our return type is also "int". However, the only
callsite returns the same information as a uint32_t, and
more generally we handle FPSR values in the code as uint32_t,
not int. Bring this function in to line with that convention.
There is no behaviour change because none of the FPSR bits
we set in this function are bit 31. The input argument to
the function remains 'int' because that is the return type
of the softfloat get_float_exception_flags().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-6-peter.maydell@linaro.org
Use the FPSR_ named constants in vfp_exceptbits_from_host(),
rather than hardcoded magic numbers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-5-peter.maydell@linaro.org
The pseudocode ResetSVEState() does:
FPSR = ZeroExtend(0x0800009f<31:0>, 64);
but QEMU's arm_reset_sve_state() called vfp_set_fpcr() by accident.
Before the advent of FEAT_AFP, this was only setting a collection of
RES0 bits, which vfp_set_fpsr() would then ignore, so the only effect
was that we didn't actually set the FPSR the way we are supposed to
do. Once FEAT_AFP is implemented, setting the bottom bits of FPSR
will change the floating point behaviour.
Call vfp_set_fpsr(), as we ought to.
(Note for stable backports: commit 7f2a01e736 moved this function
from sme_helper.c to helper.c, but it had the same bug before the
move too.)
Cc: qemu-stable@nongnu.org
Fixes: f84734b874 ("target/arm: Implement SMSTART, SMSTOP")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-4-peter.maydell@linaro.org
We don't have any functional tests for this machine yet, thus let's
add a test with a MicroPython binary that is available online
(thanks to Joel Stanley for providing it, see:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg606064.html ).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250124101709.1591761-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The `const_zero` crate provides a nice macro to zero type-specific
constants, which doesn't need to enumerates the fields one by one.
Introduce the `const_zero` macro to QEMU (along with its documentation), and
use it to simplify the implementation of `Zeroable` trait.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250123163143.679841-1-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because register reset is within a borrow_mut() call, reset
does not need anymore a mut reference to the PL011State.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify the "Interrupt" enum and the "INT_*" constants with a struct
that contains the bits. The "int_level" and "int_enabled" fields
could use a crate such as "bitflags".
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a step towards making memory ops use a shared reference to the
device type; it's not yet possible due to the calls to character device
functions.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull all the mutable fields of PL011State into a separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_irqs are not part of the vmstate, therefore they will remain in
PL011State. Update them if needed after regs_read()/regs_write().
Apply #[must_use] to functions that return whether the interrupt state
could have changed, so that it's harder to forget the call to update().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving all references to the registers and the FIFO into a
separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As an added bonus, this also makes the new function return u32 instead
of u64, thus factoring some casts into a single place.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
=qrs7
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa updates
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
# X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
# nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
# =qrs7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Jan 2025 14:53:34 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Fix booting Linux kernel with initrd
hw/hppa: Support up to 256 GiB RAM on 64-bit machines
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are 2 I2C controllers, map them both, removing
the unimplemented one. Keep the OLED controller on the
first I2C bus.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-7-philmd@linaro.org
[PMM: tweak to appease maybe-use-uninitialized warning]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions (DCx_periph) for the DeviceCapability bits,
replace direct bitmask checks with the DEV_CAP() macro,
which use the extract/deposit API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions for the number of controllers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing mapped at 0x40002000.
I2C#0 is already mapped at 0x40021000.
Remove the invalid mapping added in commits aecfbbc97a & 394c8bbfb7.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board schematic is useful to corroborate GPIOs/IRQs wiring.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-2-philmd@linaro.org
[PMM: Use https:// URLs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes INTD and MSI interrupts poking the same IRQ line without keeping track of
each other's IRQ level. Furthermore, SoCs such as the i.MX 8M Plus don't share
the MSI IRQ with the INTx lines, so expose it as a dedicated pin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes characters to be "echoed" after each keystroke rather than after every
other since imx_serial_rx_fifo_ageing_timer_restart() would see ~UTS1_RXEMPTY
only after every other keystroke.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instanciating the machine model, the machine_init()
implementations usually create the CPUs, so have access
to its first CPU. Use that rather then the &first_cpu
global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Samuel Tardieu <sam@rfc1149.net>
Message-id: 20250112225614.33723-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the TYPE_ARMV7M object forward its NVIC interrupt lines,
it is somehow misleading to name it 'nvic'. Add the 'armv7m'
local variable for clarity, but also keep the 'nvic' variable
behaving like before when used for wiring IRQ lines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tacoma-bmc machine has recently been removed, so let's remove
it from the documentation now, too.
Fixes: 2b1b66e01f ("arm: Remove tacoma-bmc machine")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250124174507.27348-1-thuth@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
On the AST2400 and AST2500 platforms, the system can only be reset by enabling
the WDT (Watchdog Timer) and waiting for the WDT timeout. However, starting
from the AST2600 platform, the reset event can be triggered directly and
intentionally by software, without relying on the WDT timeout.
This mechanism, referred to as "software restart", is implemented in hardware.
When using the software restart mechanism, the WDT counter is not enabled.
To trigger a reset generation in software mode, write 0xAEEDF123 to register
0x24 and software mode reset only support SOC reset mode.
A new function, "aspeed_wdt_is_soc_reset_mode", is introduced to determine
whether the SoC reset mode is active.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250124030249.1706996-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the -nodefaults option is set, sd devices should not be
automatically created by the machine. Instead they should be defined
on the command line.
Note that it is not currently possible to define which bus an
"sd-card" device is attached to:
-blockdev node-name=drive0,driver=file,filename=/path/to/file.img \
-device sd-card,drive=drive0,id=sd0
and the first bus named "sd-bus" will be used.
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-10-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The main changes compared to upstream 2024.11 buildroot are
- bumped Linux to version 6.11.11 with a custom config
- changed U-Boot to OpenBMC branch for more support
- included extra target packages
See branch [1] for more details.
There is a slight output change when powering off the machine,
the console now contains :
reboot: Power off not available: System halted
Adjust accordingly the expect string in
do_test_arm_aspeed_buildroot_poweroff().
[1] https://github.com/legoater/buildroot/commits/aspeed-2024.11
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-9-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add Timer model for AST2700 Timer support. The Timer controller include 8 sets
of 32-bit decrement counters.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The interrupt of TIMER0 to TIMER7 as following.
GICINT16 = TIMER 0 interrupt
GICINT17 = TIMER 1 interrupt
GICINT18 = TIMER 2 interrupt
GICINT19 = TIMER 3 interrupt
GICINT20 = TIMER 4 interrupt
GICINT21 = TIMER 5 interrupt
GICINT22 = TIMER 6 interrupt
GICINT23 = TIMER 7 interrupt
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The timer controller include 8 sets of 32-bit decrement counters, based on
either PCLK or 1MHZ clock and the design of timer controller between AST2600
and AST2700 are almost the same.
TIMER0 – TIMER7 has their own individual control and interrupt status register.
In other words, users are able to set timer control in register TMC10 with
different TIMER base address and clear timer control and interrupt status in
register TMC14 with different TIMER base address.
Introduce new "aspeed_2700_timer_read" and "aspeed_2700_timer_write" callback
functions and a new ast2700 class to support AST2700.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The register address space of each TIMER is "0x40" , and uses the following
formula to get the index and register of each TIMER.
timer_index = offset >> 6;
timer_offset = offset & 0x3f;
The TMC010 is a counter control set and interrupt status register. Write "1" to
TMC10[3:0] will set the specific bits to "1". Introduce a new
"aspeed_2700_timer_set_ctrl" function to handle this register behavior.
The TMC014 is a counter control clear and interrupt status register, to clear
the specific bits to "0", it should write "1" to TMC14[3:0] on the same bit
position. Introduce a new "aspeed_2700_timer_clear_ctrl" function to handle
this register behavior. TMC014 does not support read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
