fridtjof/qemu-cr16
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
qemu-cr16/include/hw
History
Benjamin Herrenschmidt 00fd075e18 target/ppc/spapr: Set LPCR:HR when using Radix mode 
The HW relies on LPCR:HR along with the PATE to determine whether
to use Radix or Hash mode. In fact it uses LPCR:HR more commonly
than the PATE.

For us, it's also more efficient to do so, especially since unlike
the HW we do not maintain a cache of the current PATE and HV PATE
in a generic place.

Prepare the grounds for that by ensuring that LPCR:HR is set
properly on SPAPR machines.

Another option would have been to use a callback to get the PATE
but this gets messy when implementing bare metal support, it's
much simpler (and faster) to use LPCR.

Since existing migration streams may not have it, fix it up in
spapr_post_load() as well based on the pseudo-PATE entry that
we keep.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190215170029.15641-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26 09:21:25 +11:00
..
acpi typo: apci->acpi 2019-01-30 10:16:58 +01:00
adc
arm hw/arm/armsse: Make 0x5... alias region work for per-CPU devices 2019-02-21 18:17:48 +00:00
audio audio: use TYPE_MV88W8618_AUDIO instead of hardcoded string 2018-10-29 13:50:15 +01:00
block block: Remove deprecated -drive option serial 2018-08-15 12:50:39 +02:00
char hw/char/pl011: Support all interrupt lines 2019-02-21 18:17:46 +00:00
core
cpu qom/cpu: Add cluster_index to CPUState 2019-01-29 11:46:05 +00:00
cris
display hw/display/milkymist-tmu2: Move inlined code from header to source 2019-02-01 11:58:50 +01:00
dma hw/dma/pl080: Don't use CPU address space for DMA accesses 2018-08-20 11:24:33 +01:00
firmware hw/smbios: Move to the hw/firmware/ subdirectory 2018-12-19 16:48:16 -05:00
gpio hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral 2019-01-07 15:23:47 +00:00
hyperv hyperv: process POST_MESSAGE hypercall 2018-10-19 13:44:14 +02:00
i2c smbus: Add a helper to generate SPD EEPROM data 2019-02-04 18:44:17 +11:00
i386 hw/i386/pc: enable PVH only for machine type >= 4.0 2019-02-05 16:50:17 +01:00
ide ide: Get rid of CMD646BAR struct 2019-01-25 14:52:11 -05:00
input hw/input/ps2: Remove PS2State from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
intc qom: make interface types abstract 2018-12-11 15:45:22 -02:00
ipack
ipmi qom: make interface types abstract 2018-12-11 15:45:22 -02:00
isa qom: make interface types abstract 2018-12-11 15:45:22 -02:00
kvm
lm32
m68k
mem qom: make interface types abstract 2018-12-11 15:45:22 -02:00
mips hw/mips: Use the IEC binary prefix definitions 2018-07-02 15:41:16 +02:00
misc hw/misc/tz-ppc: Support having unused ports in the middle of the range 2019-02-21 18:17:46 +00:00
net net: cadence_gem: Add support for selecting the DMA MemoryRegion 2018-10-16 17:13:49 +01:00
nvram hw/nvram/nrf51_nvm: Add nRF51 non-volatile memories 2019-02-01 15:31:26 +00:00
pci pci/msi: export msi_is_masked() 2019-02-05 10:58:33 -05:00
pci-bridge
pci-host spapr: Rename xics to intc in interrupt controller agnostic code 2019-02-17 21:54:02 +11:00
ppc target/ppc/spapr: Set LPCR:HR when using Radix mode 2019-02-26 09:21:25 +11:00
riscv sifive_uart: Implement interrupt pending register 2018-12-20 12:08:43 -08:00
s390x target/s390x: Split out s390-tod.h 2019-02-18 11:25:43 +01:00
scsi scsi: esp: Defer command completion until previous interrupts have been handled 2019-01-11 13:57:24 +01:00
sd sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR) 2018-06-08 13:15:34 +01:00
sh4 avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
sparc
ssi aspeed/smc: snoop SPI transfers to fake dummy cycles 2019-01-29 11:46:05 +00:00
timer hw/timer/pl031: Allow use as an embedded-struct device 2019-02-21 18:17:46 +00:00
tricore
unicore32
usb
vfio qemu/queue.h: typedef QTAILQ heads 2019-01-11 15:46:55 +01:00
virtio display/virtio: add edid support. 2019-02-22 07:25:04 +01:00
watchdog hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog module 2018-08-20 11:24:33 +01:00
xen pvh: Add x86/HVM direct boot ABI header file 2019-02-05 16:50:16 +01:00
xtensa target/xtensa: add MX interrupt controller 2019-01-28 11:55:20 -08:00
boards.h qemu-options: Remove deprecated "-virtioconsole" option 2019-02-05 16:50:19 +01:00
bt.h
devices.h ui/console: Remove MouseTransformInfo from qemu/typedefs.h 2019-01-22 05:14:33 +01:00
elf_ops.h elf-ops.h: Add get_elf_note_type() 2019-02-05 16:50:16 +01:00
empty_slot.h
fw-path-provider.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hotplug.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
hw.h
ide.h ide/via: Rename functions to match device name 2019-01-25 14:52:12 -05:00
irq.h
loader-fit.h
loader.h elf: Add optional function ptr to load_elf() to parse ELF notes 2019-02-05 16:50:16 +01:00
nmi.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
or-irq.h hw/core/or-irq: Support more than 16 inputs to an OR gate 2018-06-15 15:23:34 +01:00
pcmcia.h hw/pcmcia: Remove PCMCIACardState from "qemu/typedefs.h" 2019-01-22 05:14:32 +01:00
platform-bus.h platform-bus-device: use device plug callback instead of machine_done notifier 2018-05-10 18:10:56 +01:00
ptimer.h ptimer: Add TRIGGER_ONLY_ON_DECREMENT policy option 2018-07-09 14:51:34 +01:00
qdev-core.h qdev: pass an Object * to qbus_set_hotplug_handler() 2019-02-17 21:54:02 +11:00
qdev-dma.h
qdev-properties.h qapi: Define PCIe link speed and width properties 2018-12-19 16:48:16 -05:00
qdev.h
register.h
registerfields.h
stream.h qom: make interface types abstract 2018-12-11 15:45:22 -02:00
sysbus.h core/sysbus: remove the SysBusDeviceClass::init path 2018-12-13 13:48:03 +00:00
usb.h qemu/queue.h: simplify reverse access to QTAILQ 2019-01-11 15:46:55 +01:00