Function kvm_pic_realize() is added if kvm_irqchip_in_kernel() return true.
It is to notify KVM kernel to create and initialize PCH PCI device in
kernel mode.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-8-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If kvm_irqchip_in_kernel() return true, MSI interrupt can be injected
with API kvm_irqchip_send_msi() to KVM.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-7-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add save and store funtction if kvm_irqchip_in_kernel() return true,
it is to get and set IPI irqchip state from KVM kernel.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-6-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add pre_save and post_load interfaces with ipi_common class, here only
framework ipi_common adds these interfaces. The defailed implementation
is LoongArchIPI child device in later.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Function kvm_ipi_realize() is added if kvm_irqchip_in_kernel() return true.
It is to create and initialize IPI device in kernel mode.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add save and store funtction if kvm_irqchip_in_kernel() return true,
it is to get and set ExtIOI irqchip state from KVM kernel.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Function kvm_extioi_realize() is added if kvm_irqchip_in_kernel is
set. It is to create and initialize ExtIOI device in kernel mode.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250606063033.2557365-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
This removes undefined behavior associated to writing to uninitialized
fields, and makes it possible to remove "unsafe" from the instance_init
implementation.
However, the init function itself is still unsafe, because it must promise
(as a sort as MaybeUninit::assume_init) that all fields have been
initialized.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the trick that allows the parent-field initializer to be used
only for the object that it's meant to be initialized. This way,
the owner of a MemoryRegion must be the object that embeds it.
More information is in the comments; it's best explained with a simplified
example.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a smart pointer for MaybeUninit; it can be upcasted to the
already-initialized parent classes, or dereferenced to a MaybeUninit
for the class that is being initialized.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The array of BqlRefCell<HPETTimer> is not initialized yet at the
end of instance_init. In particular, the "state" field is NonNull
and therefore it is invalid to have it as zero bytes.
Note that MaybeUninit is necessary because assigning to self.timers[index]
would trigger Drop of the old value.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a macro that makes it possible to convert a MaybeUninit<> into
another MaybeUninit<> for a single field within it. Furthermore, it is
possible to use the resulting MaybeUninitField<> in APIs that take the
parent object, such as memory_region_init_io().
This allows removing some of the undefined behavior from instance_init()
functions, though this may not be the definitive implementation.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makes this custom_target() usage consistent with other ones in QEMU.
Fixes: 6e0dc9d2a8 ("meson: compile bundled device trees")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20250610204131.2862-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit fcb1ad456c ("system/datadir: Add new type constant for DTB files")
introduced a new type constant for DTB files and converted the boards with
bundled device trees to use it. Convert the other boards for consistency.
Fixes: fcb1ad456c ("system/datadir: Add new type constant for DTB files")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20250610204131.2862-2-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before commit e54ef98c8a ("target/i386: do not trigger IRQ shadow for LSS"), any
write to SS in gen_movl_seg() would cause a TB exit. The changes introduced by
this commit were intended to restrict the DISAS_EOB_INHIBIT_IRQ exit to the case
where inhibit_irq is true, but missed that a DISAS_EOB_NEXT exit can still be
required when writing to SS and inhibit_irq is false.
Comparing the PE(s) && !VM86(s) section with the logic in x86_update_hflags(), we
can see that the DISAS_EOB_NEXT exit is still required for the !CODE32 case when
writing to SS in gen_movl_seg() because any change to the SS flags can affect
hflags. Similarly we can see that the existing CODE32 case is still correct since
a change to any of DS, ES and SS can affect hflags. Finally for the
gen_op_movl_seg_real() case an explicit TB exit is not needed because the segment
register selector does not affect hflags.
Update the logic in gen_movl_seg() so that a write to SS with inhibit_irq set to
false where PE(s) && !VM86(s) will generate a DISAS_EOB_NEXT exit along with the
inline comment. This has the effect of allowing Win98SE to boot in QEMU once
again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: e54ef98c8a ("target/i386: do not trigger IRQ shadow for LSS")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2987
Link: https://lore.kernel.org/r/20250611130315.383151-1-mark.cave-ayland@ilande.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As pointed out by Akihiko Odaki, all Win32 libraries in MinGW have lowercase
names. This means that on (case-insensitive) Windows you can use the mixed-case
names suggested by Microsoft or all-lowercase names, while on Linux you need to
make them lowercase.
QEMU was already using lowercase names, so there is no need to test the
mixed-case name version of libSynchronization. Remove the unnecessary test
and while at it make all the tests use "required: true".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The build fails on Windows. Replace calls to Unix programs like ´cat´,
´sed´ and ´true´ with calls to ´python´ and wrap calls to
´os.path.relpath´ in try-except because it can fail when the two paths
are on different drives. Make sure to convert the Windows paths to Unix
paths to prevent warnings in generated files.
Signed-off-by: oltolm <oleg.tolmatcev@gmail.com>
Message-id: 20250612221521.1109-2-oleg.tolmatcev@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* hw/arm/virt: Check bypass iommu is not set for iommu-map DT property
* tests/functional: Add a test for the realview-eb-mpcore machine
* qemu-options.hx: Fix reversed description of icount sleep behavior
* target/arm: Define raw write for PMU CLR registers
* docs/interop: convert qed_spec.txt to reStructuredText format
* hw/arm: make cpu targeted by arm_load_kernel the primary CPU.
* hw/intc/arm_gic: introduce a first-cpu-index property
* hw/arm/mps2: Configure the AN500 CPU with 16 MPU regions
* linux-user/arm: Fix return value of SYS_cacheflush
-----BEGIN PGP SIGNATURE-----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=9lWk
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250616' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm/virt: Check bypass iommu is not set for iommu-map DT property
* tests/functional: Add a test for the realview-eb-mpcore machine
* qemu-options.hx: Fix reversed description of icount sleep behavior
* target/arm: Define raw write for PMU CLR registers
* docs/interop: convert qed_spec.txt to reStructuredText format
* hw/arm: make cpu targeted by arm_load_kernel the primary CPU.
* hw/intc/arm_gic: introduce a first-cpu-index property
* hw/arm/mps2: Configure the AN500 CPU with 16 MPU regions
* linux-user/arm: Fix return value of SYS_cacheflush
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmhQJLgZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3k+8EACPyIt6Tie/0kuTXG85r06P
# Iqlp59ENb4HNB43bOBlLqNNJydx1GplKnDeDVsz4MyjhtFTZ3xvY+52IbDOgb3YL
# 66uJfu1VgdnYoKOpfi3hEr9PM9QxNkENF/3+Fokn+X5tHzhNY4eo/RREQfz2tKJ5
# aKKvzmcZNYwqFLn8TKCNaAfjmqrdwVpuF+rt//4hGULZGwatt8qmlsXWLstozTAz
# SPx0utJfvblHj6a+49e0lXaL+xU5yho2J01OiNHrIGtED5Oq2Wmj/q0SV3qPiLDH
# hchuDXT71shE2JYoVeINaQpjRWzQNSPXvnEl9SyJ3Ghzop3sOZqE2iPVslvO0l5R
# rfrbR2rLnGcRPOwgntGnSMHiW+DH9ldhMUp7UvhlU3/5MJmWX2jpDfZJPsmmdyFH
# Evrf64yMO7JlLMQSMkTISZampz8aUgdlgrmQDJ4kGpdkp3GWqLE93eQGHCU16k2j
# PzjGxCIeOED4HEeGG3GrPTf0P1dy8WKla2z8ou2ANLqofrKpwFHTuGRl77ETn/bD
# 8c11hdS+uJ4Sx/efVPXWQhjCPNwLJL+DlCW0kKbGfTmiBdlcPPzPbrzmPNinVzJs
# luSGFzNit7Invfn0KZhy3l0iucMWGPdMDqN0B15RA5fFssdkuxZga5H2kOqCswOe
# 3hHo1s5PUbg+x1JAvQvi5g==
# =9lWk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 Jun 2025 10:05:44 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250616' of https://git.linaro.org/people/pmaydell/qemu-arm:
linux-user/arm: Fix return value of SYS_cacheflush
hw/arm/mps2: Configure the AN500 CPU with 16 MPU regions
hw/intc/arm_gic: introduce a first-cpu-index property
hw/arm: make cpu targeted by arm_load_kernel the primary CPU.
docs/interop: convert qed_spec.txt to reStructuredText format
target/arm: Define raw write for PMU CLR registers
qemu-options.hx: Fix reversed description of icount sleep behavior
tests/functional: Add a test for the realview-eb-mpcore machine
hw/arm/virt: Check bypass iommu is not set for iommu-map DT property
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Although the emulated cacheflush syscall does nothing, it still needs to
return zero to indicate success.
Cc: qemu-stable@nongnu.org
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Message-id: 20250613-cache-v1-1-ee9f4a9ba81b@gmx.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AN500 application note documents that it configures the Cortex-M7
CPU to have 16 MPU regions. We weren't doing this in our emulation,
so the CPU had only the default 8 MPU regions. Set the mpu-ns-regions
property to 16 for this board.
This bug doesn't affect any of the other board types we model in
this source file, because they all use either the Cortex-M3 or
Cortex-M4. Those CPUs do not have an RTL configurable number of
MPU regions, and always provide 8 regions if the MPU is built in.
Cc: qemu-stable@nongnu.org
Reported-by: Corentin GENDRE <cocotroupe20@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250605141801.1083266-1-peter.maydell@linaro.org
This introduces a first-cpu-index property to the arm-gic, as some SOCs
could have two separate GIC (ie: the zynqmp).
Signed-off-by: Clément Chigot <chigot@adacore.com>
Message-id: 20250526085523.809003-3-chigot@adacore.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: slightly expanded comment documenting GIC property]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, arm booting processus assumes that the first_cpu is the CPU
that will boot: `arm_load_kernel` is powering off all but the `first_cpu`;
`do_cpu_reset` is setting the loader address only for this `first_cpu`.
For most of the boards, this isn't an issue as the kernel is loaded and
booted on the first CPU anyway. However, for zynqmp, the option
"boot-cpu" allows to choose any CPUs.
Create a new arm_boot_info entry `primary_cpu` recording which CPU will
be boot first. This one is set when `arm_boot_kernel` is called.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250526085523.809003-2-chigot@adacore.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the qed_spec.txt file to reStructuredText and
include it in the manual.
buglink: https://gitlab.com/qemu-project/qemu/-/issues/527
Signed-off-by: Souleymane Conte <conte.souleymane@gmail.com>
Message-id: 20250609135124.45078-1-conte.souleymane@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: adjusted position of doc in the table of contents;
bulked up commit message; added file to MAINTAINERS section
for QED; made 'Consistency checking' a higher level section;
fixed one preexisting grammar nit (s/by from/from/)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Raw writes to PMCNTENCLR and PMCNTENCLR_EL0 incorrectly used their
default write function, which clears written bits instead of writes the
raw value.
PMINTENCLR and PMINTENCLR_EL1 are similar registers, but they instead
had ARM_CP_NO_RAW. Commit 7a0e58fa64 ("target-arm: Split NO_MIGRATE
into ALIAS and NO_RAW") sugguests ARM_CP_ALIAS should be used instead of
ARM_CP_NO_RAW in such a case:
> We currently mark ARM coprocessor/system register definitions with
> the flag ARM_CP_NO_MIGRATE for two different reasons:
> 1) register is an alias on to state that's also visible via
> some other register, and that other register is the one
> responsible for migrating the state
> 2) register is not actually state at all (for instance the TLB
> or cache maintenance operation "registers") and it makes no
> sense to attempt to migrate it or otherwise access the raw state
>
> This works fine for identifying which registers should be ignored
> when performing migration, but we also use the same functions for
> synchronizing system register state between QEMU and the kernel
> when using KVM. In this case we don't want to try to sync state
> into registers in category 2, but we do want to sync into registers
> in category 1, because the kernel might have picked a different
> one of the aliases as its choice for which one to expose for
> migration.
These registers fall in category 1 (ARM_CP_ALIAS), not category 2
(ARM_CP_NO_RAW).
ARM_CP_NO_RAW also has another undesired side effect that hides
registers from GDB.
Properly set raw write functions and drop the ARM_CP_NO_RAW flag from
PMINTENCLR and PMINTENCLR_EL1; this fixes GDB/KVM state synchronization
of PMCNTENCLR and PMCNTENCLR_EL0, and exposes all these four registers
to GDB.
It is not necessary to add ARM_CP_ALIAS to these registers because the
flag is already set.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Message-id: 20250531-clr-v3-1-377f9bf1746d@rsg.ci.i.u-tokyo.ac.jp
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The documentation for the -icount option incorrectly describes the behavior
of the sleep suboption. Based on the actual implementation and system
behavior, the effects of sleep=on and sleep=off were inadvertently reversed.
This commit updates the description to reflect their intended functionality.
Cc: qemu-stable@nongnu.org
Fixes: fa647905e6 ("qemu-options.hx: Fix minor issues in icount documentation")
Signed-off-by: Ethan Chen <ethan84@andestech.com>
Message-id: 20250606095728.3672832-1-ethan84@andestech.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'net_stream_send' method has a 68k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'buf1' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-32-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'net_socket_send' method has a 68k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'buf1' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-31-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'ufs_emulate_scsi_cmd' method has a 4k byte array used for
copying data from the device. Skip the automatic zero-init of
this array to eliminate the performance overhead in the I/O hot
path.
The 'outbuf' array will be fully initialized when data is copied
from the guest.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-30-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'megasas_dcmd_pd_get_list' and 'megasas_dcmd_get_properties'
methods have 4k structs used for copying data from the device.
Skip the automatic zero-init of this array to eliminate the
performance overhead in the I/O hot path.
The 'info' structs are manually initialized with memset(). The
compiler ought to be intelligent enough to turn the memset()
into a static initialization operation, and thus not duplicate
the automatic zero-init. Replacing memset() with '{}' makes it
unambiguous that the arrays are statically initialized.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-29-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'lsi_memcpy' method has a 4k byte array used for copying data
to/from the device. Skip the automatic zero-init of this array to
eliminate the performance overhead in the I/O hot path.
The 'buf' array will be fully initialized when data is copied.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-28-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'ohci_service_iso_td' method has a 8k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'buf' array will be fully initialized when reading data from guest
memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-27-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'tpm_execute' method has a pair of 4k arrays used for copying
data between guest and host. Skip the automatic zero-init of these
arrays to eliminate the performance overhead in the I/O hot path.
The two arrays will be fully initialized when reading data from
guest memory or reading data from the proxy FD.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-26-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'occ_model_tick' method has a 12k struct used for copying
data between guest and host. Skip the automatic zero-init of this
struct to eliminate the performance overhead in the I/O hot path.
The 'dynamic_data' buffer will be fully initialized when reading
data from the guest.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-25-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'nvme_map_sgl' method has a 256 element array used for copying
data from the device. Skip the automatic zero-init of this array
to eliminate the performance overhead in the I/O hot path.
The 'segment' array will be fully initialized when reading data from
the device.
The 'nme_changed_nslist' method has a 4k byte array that is manually
initialized with memset(). The compiler ought to be intelligent
enough to turn the memset() into a static initialization operation,
and thus not duplicate the automatic zero-init. Replacing memset()
with '{}' makes it unambiguous that the array is statically initialized.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-id: 20250610123709.835102-24-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'xgmac_enet_send' method has a 8k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'frame' buffer will be fully initialized when reading guest
memory to fetch the data to send.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-23-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'virtio_net_receive_rcu' method has three arrays with
VIRTQUEUE_MAX_SIZE elements, which are apprixmately 32k in
size used for copying data between guest and host. Skip the
automatic zero-init of these arrays to eliminate the
performance overhead in the I/O hot path.
The three arrays will be selectively initialized as required
when processing network buffers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-22-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'tulip_setup_frame' method has a 4k byte array used for copynig
DMA data from the device. Skip the automatic zero-init of this array
to eliminate the performance overhead in the I/O hot path.
The 'buf' array will be fully initialized when reading data from the
device.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-21-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'rtl8139_transmit_one' method has a 8k byte array used for
copying data between guest and host. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O
hot path.
The 'txbuffer' will be fully initialized when reading PCI DMA
buffers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-20-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'do_hash_operation' method has a 256 element iovec array used for
holding pointers to data that is to be hashed. Skip the automatic
zero-init of this array to eliminate the performance overhead in the
I/O hot path.
The 'iovec' array will be selectively initialized based on data that
needs to be hashed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-19-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'handle_recv_msg' method has a 4k byte array used for copying
data between the network socket and guest memory. Skip the automatic
zero-init of this array to eliminate the performance overhead in the
I/O hot path.
The 'data_buf' array will be fully initialized when data is read
off the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-18-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'vmsvga_fifo_run' method has a struct which is a little over 20k
in size, used for holding image data for cursor changes. Skip the
automatic zero-init of this struct to eliminate the performance
overhead in the I/O hot path.
The cursor variable will be fully initialized only when processing
a cursor definition message from the guest.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-17-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'xlnx_csu_dma_src_notify' method has a 4k byte array used for
copying DMA data. Skip the automatic zero-init of this array to
eliminate the performance overhead in the I/O hot path.
The 'buf' array will be fully initialized when data is copied.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-16-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'process_mdb' method has a 4k byte array used for copying data
between the guest and the chardev backend. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O hot
path.
The 'buffer' array will be selectively initialized when data is converted
between EBCDIC and ASCII.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-15-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'out_cb' method has a 4k byte array used for copying data
between the audio backend and device. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O hot
path.
The 'tmpbuf' array will be fully initialized when reading data from
device memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-14-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'write_audio' method has a 4k byte array used for copying data
between the audio backend and device. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O hot
path.
The 'tmpbuf' array will be fully initialized when reading data from
device memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-13-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'mv88w8618_audio_callback' method has a 4k byte array used for
copying data between the audio backend and device. Skip the automatic
zero-init of this array to eliminate the performance overhead in
the I/O hot path.
The 'buf' array will be fully initialized when reading data from
device memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-12-berrange@redhat.com
[Fixed hw/audio/gus in commit message --Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'GUS_read_DMA' method has a 4k byte array used for copying
data between the audio backend and device. Skip the automatic
zero-init of this array to eliminate the performance overhead in
the I/O hot path.
The 'tmpbuf' array will be fully initialized when reading data
from device memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-11-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'es1370_transfer_audio' method has a 4k byte array used for
copying data between the audio backend and device. Skip the automatic
zero-init of this array to eliminate the performance overhead in
the I/O hot path.
The 'tmpbuf' array will be fully initialized when reading data from
the audio backend and/or device memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-10-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
