This array is within CPUNegativeOffsetState, which means the
last element of the array has an offset from env with the
smallest magnitude. This can be encoded into fewer bits
when generating TCG fast path memory references.
When we changed the NB_MMU_MODES to be a global constant,
rather than a per-target value, we pessimized the code
generated for targets which use only a few mmu indexes.
By inverting the array index, we counteract that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Encapsulate access to cpu->neg.tlb.f[] in a function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a typedef instead of uint16_t directly when
describing sets of mmu indexes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the astro PCI host bridge device, we call pci_register_root_bus()
in the device's instance_init. This is a problem for two reasons
* the PCI bridge is then available to the rest of the simulation
(e.g. via pci_qdev_find_device()), even though it hasn't
yet been realized
* we do not attempt to unregister in an instance_deinit,
which means that if you go through an instance_init -> deinit
lifecycle the freed memory for the host-bridge device is
left on the pci_host_bridges list
ASAN reports the resulting use-after-free:
==1776584==ERROR: AddressSanitizer: heap-use-after-free on address 0x51f00000cb00 at pc 0x5b2d460a89b5 bp 0x7ffef7617f50 sp 0x7ffef7617f48
WRITE of size 8 at 0x51f00000cb00 thread T0
#0 0x5b2d460a89b4 in pci_host_bus_register /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:608:5
#1 0x5b2d46093566 in pci_root_bus_internal_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:677:5
#2 0x5b2d460935e0 in pci_root_bus_new /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:706:5
#3 0x5b2d46093fe5 in pci_register_root_bus /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:751:11
#4 0x5b2d46fe2335 in elroy_pcihost_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci-host/astro.c:455:16
0x51f00000cb00 is located 1664 bytes inside of 3456-byte region [0x51f00000c480,0x51f00000d200)
freed by thread T0 here:
#0 0x5b2d4582385a in free (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17ad85a) (BuildId: 692b49eedc6fb0ef618bbb6784a09311b3b7f1e8)
#1 0x5b2d47160723 in object_finalize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:734:9
#2 0x5b2d471589db in object_unref /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:1232:9
#3 0x5b2d477d373c in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:237:5
previously allocated by thread T0 here:
#0 0x5b2d45823af3 in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17adaf3) (BuildId: 692b49eedc6fb0ef618bbb6784a09311b3b7f1e8)
#1 0x79728fa08b09 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x62b09) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b2d471595fc in object_new_with_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:767:15
#3 0x5b2d47159409 in object_new_with_class /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:782:12
#4 0x5b2d477d29a5 in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:206:11
Cc: qemu-stable@nongnu.org
Fixes: e029bb00a7 ("hw/pci-host: Add Astro system bus adapter found on PA-RISC machines")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3118
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250918114259.1802337-3-peter.maydell@linaro.org>
In the dino PCI host bridge device, we call pci_register_root_bus()
in the device's instance_init. This is a problem for two reasons
* the PCI bridge is then available to the rest of the simulation
(e.g. via pci_qdev_find_device()), even though it hasn't
yet been realized
* we do not attempt to unregister in an instance_deinit,
which means that if you go through an instance_init -> deinit
lifecycle the freed memory for the host-bridge device is
left on the pci_host_bridges list
ASAN reports the resulting use-after-free:
==1771223==ERROR: AddressSanitizer: heap-use-after-free on address 0x527000018f80 at pc 0x5b4b9d3369b5 bp 0x7ffd01929980 sp 0x7ffd01929978
WRITE of size 8 at 0x527000018f80 thread T0
#0 0x5b4b9d3369b4 in pci_host_bus_register /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:608:5
#1 0x5b4b9d321566 in pci_root_bus_internal_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:677:5
#2 0x5b4b9d3215e0 in pci_root_bus_new /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:706:5
#3 0x5b4b9d321fe5 in pci_register_root_bus /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:751:11
#4 0x5b4b9d390521 in dino_pcihost_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci-host/dino.c:473:16
0x527000018f80 is located 1664 bytes inside of 12384-byte region [0x527000018900,0x52700001b960)
freed by thread T0 here:
#0 0x5b4b9cab185a in free (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17ad85a) (BuildId: ca496bb2e4fc750ebd289b448bad8d99c0ecd140)
#1 0x5b4b9e3ee723 in object_finalize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:734:9
#2 0x5b4b9e3e69db in object_unref /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:1232:9
#3 0x5b4b9ea6173c in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:237:5
#4 0x5b4b9ec4e0f3 in qmp_marshal_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qapi/qapi-commands-qdev.c:65:14
previously allocated by thread T0 here:
#0 0x5b4b9cab1af3 in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17adaf3) (BuildId: ca496bb2e4fc750ebd289b448bad8d99c0ecd140)
#1 0x799d8270eb09 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x62b09) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b4b9e3e75fc in object_new_with_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:767:15
#3 0x5b4b9e3e7409 in object_new_with_class /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:782:12
#4 0x5b4b9ea609a5 in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:206:11
where we allocated one instance of the dino device, put it on the
list, freed it, and then trying to allocate a second instance touches
the freed memory on the pci_host_bridges list.
Fix this by deferring all the setup of memory regions and registering
the PCI bridge to the device's realize method. This brings it into
line with almost all other PCI host bridges, which call
pci_register_root_bus() in realize.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3118
Fixes: 63901b6cc4 ("dino: move PCI bus initialisation to dino_pcihost_init()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250918114259.1802337-2-peter.maydell@linaro.org>
For v7, bits [12:5] are ignored for !imm.
For v8, those same bits are reserved, but are not trapped.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: e8325dc02d ("target/sparc: Move RDTBR, FLUSHW to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: 5d617bfba0 ("target/sparc: Move RDWIM, RDPR to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: 668bb9b755 ("target/sparc: Move RDPSR, RDHPR to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bits [18:0] are not decoded with v7, and for v8 unused values
of rs1 simply produce undefined results.
Fixes: af25071c1d ("target/sparc: Move RDASR, STBAR, MEMBAR to decodetree")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Solaris 8 appears to have a bug whereby it executes v9 MEMBAR
instructions when booting a freshly installed image. According
to the SPARC v8 architecture manual, whilst bits 13 and bits 12-0
of the "Read State Register Instructions" are notionally zero,
they are marked as unused (i.e. ignored).
Fixes: af25071c1d ("target/sparc: Move RDASR, STBAR, MEMBAR to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3097
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Use ## to drop the preceding comma if __VA_ARGS__ is empty.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit adds support for the `prctl(PR_SET_SYSCALL_USER_DISPATCH)`
function in the Linux userspace emulator.
It is implemented as a fully host-independent function, by forcing
a SIGSYS early during syscall handling, if the PC is outside the
allowed range.
Since disabled SUD is indistinguishable from enabled SUD with
always-allowed region length == ~0, this encoding is used
instead of introducing a new flag.
Tested on [uglendix][1], will probably also apply to software like
tiny-wine, rpcsx, limbo, lazypoline, vicar, sysfail and endokernel,
to name a few.
[1]: https://sr.ht/~arusekk/uglendix
Signed-off-by: Arusekk <floss@arusekk.pl>
Message-ID: <20250711225226.14652-1-floss@arusekk.pl>
[rth: Split out is_vdso_sigreturn region matching and other minor tweaks.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a target does not support a vdso, we generate a sigtramp page.
The only thing on this page is a (set of) signal return syscalls.
We do not need to narrowly restrict the vdso_sigreturn_region;
simply record the entire page for all such targets.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark the regions which contain sigreturn syscalls within
each vdso. Rebuild the shared objects.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These variables will be populated from the vdso, and used
for detecting whether we are executing the sigreturn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Check and honour failures to the blocking flag on FDs
* Don't touch blocking flags on FDs received during migration
-----BEGIN PGP SIGNATURE-----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=rrMd
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
* Update security triage contact address
* Check and honour failures to the blocking flag on FDs
* Don't touch blocking flags on FDs received during migration
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmjNQuAACgkQvobrtBUQ
# T99xaBAAr6zQPii1tjzuzLovF6MIqtldXnmVO/yjcl5NgLWonIRDt2JsxnRxi3es
# 9uNDed5+ePNXmUAYd46k81gBEjBWbv465kt5FHAZZV6BRw/PPzkoh+jzGc8NVir8
# 3GZJ2kPr51PxGEl8md2vRthg4bMuhlS5ogCEqAMDYT4f6AVemfnNQ5NttGX353T2
# etxoMhEeMtTBKjMoTBv+SVhhO4nKwZ+6CFhvuGON423EfrGlkNTXyprKTdzpr4i0
# 4KDQLxxoANlmg/1W0PxfrLiBCmGpHweMR44Piv715VYa2YNPRq0G6EC6AFGbHZ51
# N+mKmWNE0CS5rP1TEacSCX4q6If5VxjSLLj+og8LmpIlJ6tiqdrisSqA6bzCJ1f/
# lMsfUsKoMqPhqat9ZGUkYu8REgKP+O+CSGJNftYTsEEY0oKZrAW4fsoN3E9qpfcG
# Xy6eSu0TTGDWE6CEe0vkHiQwlVHMtRcWMSPwlsvrgt2TO6k97reT3AoIBK2VfygC
# WzMv0P0nBvHFKeIbqmFOk3BEI5+JECgxVRc1WXWbSFLW0PBY/xd7g6ow8uaQsd9e
# pzMA1Pwh2EuM4DTlOy+m9zBOhm9YP9An188NLldOne3TFKFYe5QO1DQpvvEGvIGB
# +4XpmyOj3g2ycelZZ5XsDJk0LumCCOcbSPSiAvHZyWwLo24EABE=
# =rrMd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 Sep 2025 04:47:44 AM PDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [unknown]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
util/vhost-user-server: vu_message_read(): improve error handling
chardev: close an fd on failure path
chardev: qemu_chr_open_fd(): add errp
treewide: use qemu_set_blocking instead of g_unix_set_fd_nonblocking
util: drop qemu_socket_set_block()
io/channel-socket: rework qio_channel_socket_copy_fds()
util: drop qemu_socket_try_set_nonblock()
util: drop qemu_socket_set_nonblock()
migration: qemu_file_set_blocking(): add errp parameter
treewide: handle result of qio_channel_set_blocking()
util: add qemu_set_blocking() function
char-socket: tcp_chr_recv(): add comment
char-socket: tcp_chr_recv(): drop extra _set_(block,cloexec)
io/channel: document how qio_channel_readv_full() handles fds
migration/qemu-file: don't make incoming fds blocking again
MAINTAINERS: list qemu-security@nongnu.org as security contact
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. Drop extra error_report_err(NULL), it will just crash, if we get
here.
2. Get and report error of qemu_set_blocking(), instead of aborting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are at least two failure paths, where we forget
to close an fd.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Every caller already support errp, let's go further.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of open-coded g_unix_set_fd_nonblocking() calls, use
QEMU wrapper qemu_set_blocking().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix missing closing ) in tap-bsd.c, remove now unused GError var]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now it's unused.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to switch from qemu_socket_set_block() to newer
qemu_set_blocking(), which provides return status of operation,
to handle errors.
Still, we want to keep qio_channel_socket_readv() interface clean,
as currently it allocate @fds only on success.
So, in case of error, we should close all incoming fds and keep
user's @fds untouched or zero.
Let's make separate functions qio_channel_handle_fds() and
qio_channel_cleanup_fds(), to achieve what we want.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now we can use qemu_set_blocking() in these cases.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use common qemu_set_blocking() instead.
Note that pre-patch the behavior of Win32 and Linux realizations
are inconsistent: we ignore failure for Win32, and assert success
for Linux.
How do we convert the callers?
1. Most of callers call qemu_socket_set_nonblock() on a
freshly created socket fd, in conditions when we may simply
report an error. Seems correct switching to error handling
both for Windows (pre-patch error is ignored) and Linux
(pre-patch we assert success). Anyway, we normally don't
expect errors in these cases.
Still in tests let's use &error_abort for simplicity.
What are exclusions?
2. hw/virtio/vhost-user.c - we are inside #ifdef CONFIG_LINUX,
so no damage in switching to error handling from assertion.
3. io/channel-socket.c: here we convert both old calls to
qemu_socket_set_nonblock() and qemu_socket_set_block() to
one new call. Pre-patch we assert success for Linux in
qemu_socket_set_nonblock(), and ignore all other errors here.
So, for Windows switch is a bit dangerous: we may get
new errors or crashes(when error_abort is passed) in
cases where we have silently ignored the error before
(was it correct in all such cases, if they were?) Still,
there is no other way to stricter API than take
this risk.
4. util/vhost-user-server - compiled only for Linux (see
util/meson.build), so we are safe, switching from assertion to
&error_abort.
Note: In qga/channel-posix.c we use g_warning(), where g_printerr()
would actually be a better choice. Still let's for now follow
common style of qga, where g_warning() is commonly used to print
such messages, and no call to g_printerr(). Converting everything
to use g_printerr() should better be another series.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_file_set_blocking() is a wrapper on qio_channel_set_blocking(),
so let's passthrough the errp.
Note the migration should not be using &error_abort in these calls,
however, this is done to expedite the API conversion.
The original code would have eventually ended up calling either
qemu_socket_set_nonblock which would asset on Linux, or
g_unix_set_fd_nonblocking which would propagate errors. We never
saw asserts in practice, and conceptually they should not happen,
but ideally this code will be later adapted to remove use of
&error_abort.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, we just always pass NULL as errp argument. That doesn't
look good.
Some realizations of interface may actually report errors.
Channel-socket realization actually either ignore or crash on
errors, but we are going to straighten it out to always reporting
an errp in further commits.
So, convert all callers to either handle the error (where environment
allows) or explicitly use &error_abort.
Take also a chance to change the return value to more convenient
bool (keeping also in mind, that underlying realizations may
return -1 on failure, not -errno).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix return type mismatch in TLS/websocket channel
impls for qio_channel_set_blocking]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In generic code we have qio_channel_set_blocking(), which takes
bool parameter, and qemu_file_set_blocking(), which as well takes
bool parameter.
At lower fd-layer we have a mess of functions:
- enough direct calls to Unix-specific g_unix_set_fd_nonblocking()
(of course, all calls are out of Windows-compatible code), which
is glib specific with GError, which we can't use, and have to
handle error-reporting by hand after the call.
and several platform-agnostic qemu_* helpers:
- qemu_socket_set_nonblock(), which asserts success for posix (still,
in most cases we can handle the error in better way) and ignores
error for win32 realization
- qemu_socket_try_set_nonblock(), providing and error, but not errp,
so we have to handle it after the call
- qemu_socket_set_block(), which simply ignores an error
Note, that *_socket_* word in original API, which we are going
to substitute was intended, because Windows support these operations
only for sockets. What leads to solution of dropping it again?
1. Having a QEMU-native wrapper with errp parameter
for g_unix_set_fd_nonblocking() for non-socket fds worth doing,
at least to unify error handling.
2. So, if try to keep _socket_ vs _file_ words, we'll have two
actually duplicated functions for Linux, which actually will
be executed successfully on any (good enough) fds, and nothing
prevent using them improperly except for the name. That doesn't
look good.
3. Naming helped us in the world where we crash on errors or
ignore them. Now, with errp parameter, callers are intended to
proper error checking. And for places where we really OK with
crash-on-error semantics (like tests), we have an explicit
&error_abort.
So, this commit starts a series, which will effectively revert
commit ff5927baa7 "util: rename qemu_*block() socket functions"
(which in turn was reverting f9e8cacc55
"oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()",
so that's a long story).
Now we don't simply rename, instead we provide the new API and
update all the callers.
This commit only introduces a new fd-layer wrapper. Next commits
will replace old API calls with it, and finally remove old API.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comment, to stress that the order of operation (first drop old fds,
second check read status) is intended.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qio_channel_readv_full() guarantees BLOCKING and CLOEXEC states for
incoming descriptors, no reason to call extra ioctls.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only realization, which may have incoming fds is
qio_channel_socket_readv() (in io/channel-socket.c).
qio_channel_socket_readv() do call (through
qio_channel_socket_copy_fds()) qemu_socket_set_block() and
qemu_set_cloexec() for each fd.
Also, qio_channel_socket_copy_fds() is called at the end of
qio_channel_socket_readv(), on success path.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In migration we want to pass fd "as is", not changing its
blocking status.
The only current user of these fds is CPR state (through VMSTATE_FD),
which of-course doesn't want to modify fds on target when source is
still running and use these fds.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu-security@nongnu.org list is considered the authoritative
contact for reporting QEMU security issues. Remove the Red Hat
security team address in favour of QEMU's list, to ensure that
upstream gets first contact. There is a representative of the
Red Hat security team as a member of qemu-security@nongnu.org
whom requests CVE assignments on behalf of QEMU when needed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gstrfuncs.h is not intended to be included directly.
In fact this only works because glib.h is already included by osdep.h.
Just remove the include.
Signed-off-by: Peter Foley <pefoley@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250905-9p-v2-1-2ad31999684d@google.com
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This is largely derived from existing Darwin support. FreeBSD
apparently has better support for *at() system calls so doesn't require
workarounds for a missing mknodat(). The implementation has a couple of
warts however:
- The extattr(2) system calls don't support anything akin to
XATTR_CREATE or XATTR_REPLACE, so a racy workaround is implemented.
- Attribute names cannot begin with "user." or "system." on ZFS.
However FreeBSD's extattr(2) system calls support two dedicated
namespaces for these two. So "user." or "system." prefixes are
trimmed off from attribute names and instead EXTATTR_NAMESPACE_USER or
EXTATTR_NAMESPACE_SYSTEM are picked and passed to extattr system calls
accordingly.
The 9pfs tests were verified to pass on the UFS, ZFS and tmpfs
filesystems.
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Link: https://lore.kernel.org/qemu-devel/aJOWhHB2p-fbueAm@nuc
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQTKRzxE1qCcGJoZP81FK5aFKyaCFgUCaMvTpQAKCRBFK5aFKyaC
Fkk0BACDkaQa6jDON8aLcTFcwpIlrnblqlYo6EK7TaGqpI866EhTX09BscRF5bvp
3JtGARKy5a6s5GJ64KItIl4n5Z6xvt4ME1KjyqeUTpD99c7J1krgxl6+W/NthK/K
cLbSnlfvcw/L6KfIsGP6i2F6Y+riyZf6OYMc9IF/xFEAIMKJyA==
=EgXn
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250918' of https://github.com/gaosong715/qemu into staging
pull-loongarch-20250918
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQTKRzxE1qCcGJoZP81FK5aFKyaCFgUCaMvTpQAKCRBFK5aFKyaC
# Fkk0BACDkaQa6jDON8aLcTFcwpIlrnblqlYo6EK7TaGqpI866EhTX09BscRF5bvp
# 3JtGARKy5a6s5GJ64KItIl4n5Z6xvt4ME1KjyqeUTpD99c7J1krgxl6+W/NthK/K
# cLbSnlfvcw/L6KfIsGP6i2F6Y+riyZf6OYMc9IF/xFEAIMKJyA==
# =EgXn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Sep 2025 02:40:53 AM PDT
# gpg: using RSA key CA473C44D6A09C189A193FCD452B96852B268216
# gpg: Good signature from "Song Gao <gaosong@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CA47 3C44 D6A0 9C18 9A19 3FCD 452B 9685 2B26 8216
* tag 'pull-loongarch-20250918' of https://github.com/gaosong715/qemu:
hw/loongarch/virt: Register reset interface with cpu plug callback
hw/loongarch/virt: Remove unnecessay pre-boot setting with BSP
hw/loongarch/virt: Add BSP support with aux boot code
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With cpu hotplug is implemented on LoongArch virt machine, reset
interface with hot-added CPU should be registered. Otherwise there
will be problem if system reboots after cpu is hot-added.
Now register reset interface with CPU plug callback, so that all
cold/hot added CPUs let their reset interface registered. And remove
reset interface with CPU unplug callback.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250906070200.3749326-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
With BSP core, it boots from aux boot code and loads data into register
A0-A2 and PC. Pre-boot setting is not unnecessary and can be removed.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250906070200.3749326-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
If system boots directly from Linux kernel, BSP core jumps to kernel
entry of Linux kernel image and other APs jump to aux boot code. Instead
BSP and APs can all jump to aux boot code like UEFI bios.
With aux boot code, BSP core is judged from physical cpu id, whose
cpu id is 0. With BSP core, load data to register A0-A2 and PC.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250906070200.3749326-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
* tests, scripts: Don't import print_function from __future__
* Implement FEAT_ATS1A
* Remove deprecated pxa CPU family
* arm/kvm: report registers we failed to set
* Expose SME registers to GDB via gdbstub
* linux-user/aarch64: Generate ESR signal records
* hw/arm/raspi4b: remove redundant check in raspi_add_memory_node
* hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
* system: drop the -old-param option
-----BEGIN PGP SIGNATURE-----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=5tK3
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250916' of https://gitlab.com/pm215/qemu into staging
target-arm queue:
* tests, scripts: Don't import print_function from __future__
* Implement FEAT_ATS1A
* Remove deprecated pxa CPU family
* arm/kvm: report registers we failed to set
* Expose SME registers to GDB via gdbstub
* linux-user/aarch64: Generate ESR signal records
* hw/arm/raspi4b: remove redundant check in raspi_add_memory_node
* hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
* system: drop the -old-param option
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmjJpt8ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vRGEACO3VrePiMIA9N7egqlUiGn
# aRQVqIKeuPVj6TRVG7BSNWlAX8qvnOWOKg1yGVHDZv/nLvRje9UyfUAw7pf6jXod
# bzxWBCPJ0J0eOB64Tz87WRCLltKB5pEN+uIG00PtpBcXT1ixYCDgBZXyD3mwuJ4Q
# 5Yc5hEwQzpmh+EycLtfCHbmjKDw3x1ncpVlGceOG4h5fvzIvIhcNcZJXfAHhbhyO
# Y4c5PELrCkCLZaTtSSxd6VJ+vXQ9bNWyKaSZu2KRRnLcMeAqw2Ic7dLPlkzCVyxM
# PTOHy4TuDu+kqCbkxdnhpI6fvq5kcHyfTL6qX6tth8ZZS+qKGtvMEIXnYoy6q1kh
# 4jV5vizK8avx31fSiuTKVpttRv4dC+Aq5QrcgYtIVMeOwtkWHv610D8gcFPmXoG+
# uHX9WdzOjrYOzXVKzJaCZF6b7L31ptSEfOrx7asBC9k2wPRwonFXg4JGNq16Yann
# aAO5TM7NAUvM2IPgqS+Tf1Bk0iQqORxGfqzCyL76OO/QMMgfBy9elKH0UR0G+ePJ
# yjpub1oWIELSXsQGMrdFo1W4/NIpFMTu3DP9W+6XRPu1AvrAx/AsrTuvSvXoeFY9
# d/U3yWAXm5XxRzbCIUg7ke8I8zLwRz924M5PA8vophvSnfDLS3V8CJHLwbz/PqYc
# 0P2KCeI6d2NIhVik4mgEoQ==
# =5tK3
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 16 Sep 2025 11:05:19 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [unknown]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [unknown]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [unknown]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250916' of https://gitlab.com/pm215/qemu: (36 commits)
hw/usb/network: Remove hardcoded 0x40 prefix in STRING_ETHADDR response
qtest/bios-tables-test: Update tables for smmuv3 tests
qtest/bios-tables-test: Add tests for legacy smmuv3 and smmuv3 device
bios-tables-test: Allow for smmuv3 test data.
qemu-options.hx: Document the arm-smmuv3 device
hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
hw/pci: Introduce pci_setup_iommu_per_bus() for per-bus IOMMU ops retrieval
hw/arm/virt: Add an SMMU_IO_LEN macro
hw/arm/virt: Factor out common SMMUV3 dt bindings code
hw/arm/virt-acpi-build: Update IORT for multiple smmuv3 devices
hw/arm/virt-acpi-build: Re-arrange SMMUv3 IORT build
hw/arm/smmu-common: Check SMMU has PCIe Root Complex association
target/arm: Added test case for SME register exposure to GDB
target/arm: Added support for SME register exposure to GDB
target/arm: Increase MAX_PACKET_LENGTH for SME ZA remote gdb debugging
arm/kvm: report registers we failed to set
system: drop the -old-param option
target/arm: Drop ARM_FEATURE_IWMMXT handling
target/arm: Drop ARM_FEATURE_XSCALE handling
target/arm: Remove iwmmxt helper functions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Current QEMU unconditionally sets the guest_memfd_offset of KVMSlot in
kvm_set_phys_mem(), which leads to the trace of kvm_set_user_memory looks:
kvm_set_user_memory AddrSpace#0 Slot#4 flags=0x2 gpa=0xe0000 size=0x20000 ua=0x7f5840de0000 guest_memfd=-1 guest_memfd_offset=0x3e0000 ret=0
It's confusing that the guest_memfd_offset has a non-zero value while
the guest_memfd is invalid (-1).
Change to only set guest_memfd_offset when guest_memfd is valid and
leave it as 0 when no valid guest_memfd.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250728115707.1374614-4-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zero out the entire mem explicitly before it's used, to ensure the unused
feilds (pad1, pad2) are all zeros. Otherwise, it might cause problem when
the pad fields are extended by future KVM.
Fixes: ce5a983233 ("kvm: Enable KVM_SET_USER_MEMORY_REGION2 for memslot")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20250728115707.1374614-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It returns more accruate result on checking KVM_CAP_GUEST_MEMFD and
KVM_CAP_USER_MEMORY2 on VM instance instead of on KVM platform.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250728115707.1374614-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_machine_is_smm_enabled() checks the KVM_CAP_X86_SMM for KVM
case. No need to check KVM_CAP_X86_SMM in kvm_arch_init().
So just drop the check of KVM_CAP_X86_SMM to simplify the code.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250729062014.1669578-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While running the kvm-unit-tests on Intel platforms with "split lock
disable" feature, every test triggers a kernel warning of
x86/split lock detection: #AC: qemu-system-x86_64/373232 took a split_lock trap at address: 0x1e3
Hack KVM by exiting to QEMU on split lock #AC, we get
KVM: exception 17 exit (error code 0x0)
EAX=00000001 EBX=00000000 ECX=00000014 EDX=0001fb80
ESI=00000000 EDI=000000a8 EBP=00000000 ESP=00006f10
EIP=000001e3 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0900 00009000 0000ffff 00009300 DPL=0 DS16 [-WA]
CS =c000 000c0000 0000ffff 00009b00 DPL=0 CS16 [-RA]
SS =0000 00000000 0000ffff 00009300 DPL=0 DS16 [-WA]
DS =c000 000c0000 0000ffff 00009300 DPL=0 DS16 [-WA]
FS =0950 00009500 0000ffff 00009300 DPL=0 DS16 [-WA]
GS =06f2 00006f20 0000ffff 00009300 DPL=0 DS16 [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 000c02b4 00000027
IDT= 00000000 000003ff
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=89 16 08 00 65 66 0f 01 16 06 00 66 b8 01 00 00 00 0f 22 c0 <65> 66 ff 2e 00 00 b8 10 00 00 00 8e d0 8e d8 8e c0 8e e0 8e e8 66 b8 08 00 66 ba 10 05 66
And it matches with what disassembled from multiboo_dma.bin:
#objdump -b binary -m i386 -D pc-bios/multiboot_dma.bin
1d1: 08 00 or %al,(%eax)
1d3: 65 66 0f 01 16 lgdtw %gs:(%esi)
1d8: 06 push %es
1d9: 00 66 b8 add %ah,-0x48(%esi)
1dc: 01 00 add %eax,(%eax)
1de: 00 00 add %al,(%eax)
1e0: 0f 22 c0 mov %eax,%cr0
> 1e3: 65 66 ff 2e ljmpw *%gs:(%esi)
1e7: 00 00 add %al,(%eax)
1e9: b8 10 00 00 00 mov $0x10,%eax
1ee: 8e d0 mov %eax,%ss
1f0: 8e d8 mov %eax,%ds
1f2: 8e c0 mov %eax,%es
1f4: 8e e0 mov %eax,%fs
1f6: 8e e8 mov %eax,%gs
1f8: 66 b8 08 00 mov $0x8,%ax
1fc: 66 ba 10 05 mov $0x510,%dx
We can see that the instruction at 0x1e3 is a far jmp through the GDT.
However, the GDT is not 8 byte aligned, the base is 0xc02b4.
Intel processors follow the LOCK semantics to set the accessed flag of the
segment descriptor when loading a segment descriptor. If the the segment
descriptor crosses two cache line, it causes split lock.
Fix it by aligning the GDT on 8 bytes, so that segment descriptor cannot
span two cache lines.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20250808035027.2194673-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define X86ASIdx as enum, like ARM's ARMASIdx, so that it's clear index 0
is for memory and index 1 is for SMM.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Tested-By: Kirill Martynov <stdcalllevi@yandex-team.ru>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250730095253.1833411-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kirill Martynov reported assertation in cpu_asidx_from_attrs() being hit
when x86_cpu_dump_state() is called to dump the CPU state[*]. It happens
when the CPU is in SMM and KVM emulation failure due to misbehaving
guest.
The root cause is that QEMU i386 never enables the SMM address space for
cpu since KVM SMM support has been added.
Enable the SMM cpu address space under KVM when the SMM is enabled for
the x86machine.
[*] https://lore.kernel.org/qemu-devel/20250523154431.506993-1-stdcalllevi@yandex-team.ru/
Reported-by: Kirill Martynov <stdcalllevi@yandex-team.ru>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Kirill Martynov <stdcalllevi@yandex-team.ru>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250730095253.1833411-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
