SPCR acpi table can now be disabled
vhost-vdpa can now report hashing capability to guest
PPTT acpi table now tells guest vCPUs are identical
vost-user-blk now shuts down faster
loongarch64 now supports bios-tables-test
intel_iommu now supports ATS
cxl now supports DCD Fabric Management Command Set
arm now supports acpi pci hotplug
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmh1+7APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcZ8H/2udpCZ49vjPB8IwQAGdFTw2TWVdxUQFHexQ
pOsCGyFBNAXqD1bmb8lwWyYVJ08WELyL6xWsQ5tfVPiXpKYYHPHl4rNr/SPoyNcv
joY++tagudmOki2DU7nfJ+rPIIuigOTUHbv4TZciwcHle6f65s0iKXhR1sL0cj4i
TS6iJlApSuJInrBBUxuxSUomXk79mFTNKRiXj1k58LRw6JOUEgYvtIW8i+mOUcTg
h1dZphxEQr/oG+a2pM8GOVJ1AFaBPSfgEnRM4kTX9QuTIDCeMAKUBo/mwOk6PV7z
ZhSrDPLrea27XKGL++EJm0fFJ/AsHF1dTks2+c0rDrSK+UV87Zc=
=sktm
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features, fixes, tests
SPCR acpi table can now be disabled
vhost-vdpa can now report hashing capability to guest
PPTT acpi table now tells guest vCPUs are identical
vost-user-blk now shuts down faster
loongarch64 now supports bios-tables-test
intel_iommu now supports ATS
cxl now supports DCD Fabric Management Command Set
arm now supports acpi pci hotplug
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmh1+7APHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpcZ8H/2udpCZ49vjPB8IwQAGdFTw2TWVdxUQFHexQ
# pOsCGyFBNAXqD1bmb8lwWyYVJ08WELyL6xWsQ5tfVPiXpKYYHPHl4rNr/SPoyNcv
# joY++tagudmOki2DU7nfJ+rPIIuigOTUHbv4TZciwcHle6f65s0iKXhR1sL0cj4i
# TS6iJlApSuJInrBBUxuxSUomXk79mFTNKRiXj1k58LRw6JOUEgYvtIW8i+mOUcTg
# h1dZphxEQr/oG+a2pM8GOVJ1AFaBPSfgEnRM4kTX9QuTIDCeMAKUBo/mwOk6PV7z
# ZhSrDPLrea27XKGL++EJm0fFJ/AsHF1dTks2+c0rDrSK+UV87Zc=
# =sktm
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Jul 2025 02:56:48 EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (97 commits)
hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release
hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add
hw/cxl: Create helper function to create DC Event Records from extents
hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists
hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config
hw/mem: cxl_type3: Add DC Region bitmap lock
hw/cxl: Move definition for dynamic_capacity_uuid and enum for DC event types to header
hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config
hw/mem: cxl_type3: Add dsmas_flags to CXLDCRegion struct
hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info
hw/cxl: fix DC extent capacity tracking
tests: virt: Update expected ACPI tables for virt test
hw/acpi/aml-build: Build a root node in the PPTT table
hw/acpi/aml-build: Set identical implementation flag for PPTT processor nodes
tests: virt: Allow changes to PPTT test table
qtest/bios-tables-test: Generate reference blob for DSDT.acpipcihp
qtest/bios-tables-test: Generate reference blob for DSDT.hpoffacpiindex
tests/qtest/bios-tables-test: Add aarch64 ACPI PCI hotplug test
tests/qtest/bios-tables-test: Prepare for addition of acpi pci hp tests
hw/arm/virt: Let virt support pci hotplug/unplug GED event
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Conflicts:
net/vhost-vdpa.c
vhost_vdpa_set_steering_ebpf() was removed, resolve the context
conflict.
As each target declares the same prototypes, we can
use a single header, removing the TARGET_XXX uses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20250513171737.74386-1-philmd@linaro.org>
Allow capping the maximum total size of in-flight VFIO device state buffers
queued at the destination, otherwise a malicious QEMU source could
theoretically cause the target QEMU to allocate unlimited amounts of memory
for buffers-in-flight.
Since this is not expected to be a realistic threat in most of VFIO live
migration use cases and the right value depends on the particular setup
disable this limit by default by setting it to UINT64_MAX.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/4f7cad490988288f58e36b162d7a888ed7e7fd17.1752589295.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This property allows configuring whether to start the config load only
after all iterables were loaded, during non-iterables loading phase.
Such interlocking is required for ARM64 due to this platform VFIO
dependency on interrupt controller being loaded first.
The property defaults to AUTO, which means ON for ARM, OFF for other
platforms.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/0e03c60dbc91f9a9ba2516929574df605b7dfcb4.1752589295.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-11-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prepatory patch for following FMAPI Add/Release Patches. Refactors part
of qmp_cxl_process_dynamic_capacity_prescriptive() into a helper
function to create DC Event Records and insert in the event log.
Moves definition for CXL_NUM_EXTENTS_SUPPORTED to cxl.h so it can be
accessed by cxl-mailbox-utils.c and cxl-events.c, where the helper
function is defined.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a lock on the bitmap of each CXLDCRegion in preparation for the next
patch which implements FMAPI Set DC Region Configuration. This command
can modify the block size, which means the region's bitmap must be updated
accordingly.
The lock becomes necessary when commands that add/release extents
(meaning they update the bitmap too) are enabled on a different CCI than
the CCI on which the FMAPI commands are enabled.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move definition/enum to cxl_events.h for shared use in next patch
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add booleans to DC Region struct to represent dsmas flags (defined in CDAT) in
preparation for the next command, which returns the flags in the next mailbox
command 0x5601.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
FM DCD Management command 0x5600 implemented per CXL 3.2 Spec Section 7.6.7.6.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per cxl r3.2 Section 9.13.3.3, extent capacity tracking should include
extents in different states including added, pending, etc.
Before the change, for the in-device extent number tracking purpose, we only
have "total_extent_count" defined, which only tracks the number of
extents accepted. However, we need to track number of extents in other
states also, for now it is extents pending-to-add.
To fix that, we introduce a new counter for dynamic capacity
"nr_extents_accepted" which explicitly tracks number of the extents
accepted by the hosts, and fix "total_extent_count" to include
both accepted and pending extents counting.
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250714174509.1984430-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a local SysBusDevice handle. Also use the newly introduced
sysbus_mmio_map_name which brings better readability about the region
being mapped. GED device has regions which exist depending on some
external properties and it becomes difficult to guess the index of
a region. Better refer to a region by its name.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-32-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some sysbus devices have conditional mmio regions. This
happens for instance with the hw/acpi/ged device. In that case
it becomes difficult to predict which index a specific MMIO
region corresponds to when one needs to mmio map the region.
Introduce a new helper that takes the name of the region instead
of its index. If the region is not found this returns -1.
Otherwise it maps the corresponding index and returns this latter.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-31-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the DSDT ACPI table to enable ACPI PCI hotplug.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-24-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move aml_pci_edsm to pci-bridge.c since we want to reuse that for
ARM and acpi-index support. Also rename it into build_pci_bridge_edsm.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-17-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We intend to reuse build_append_pci_bus_devices and build_append_pcihp_slots
on ARM. So let's move them to hw/acpi/pcihp.c as well as all static
helpers they use.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-15-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_append_notification_callback() on ARM
so let's move it to pcihp.c.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-14-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On ARM we will put the operation regions in AML_SYSTEM_MEMORY.
So let's allow this configuration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-13-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract the code that reserves resources for ACPI PCI hotplug
into a new helper named build_append_pcihp_resources() and
move it to pcihp.c. We will reuse it on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-12-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the acpi pcihp property value from the ged. In case this latter
is not set, PCI native hotplug is used on pci0. For expander bridges we
keep pci native hotplug, as done on x86 q35.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-8-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new boolean property is introduced. This will be used to turn
ACPI PCI hotplug support. By default it is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to export aml_pci_device_dsm() as it is only used
in hw/i386/acpi-build.c.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The address_type bit will be set to PCI_AT_TRANSLATED by devices that
use cached addresses obtained via ATS.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thanks to 72d277a7, 1ed2cb32, and others, EDID (Extended Display
Identification Data) is propagated by QEMU such that a virtual display
presents legitimate metadata (e.g., name, serial number, preferred
resolutions, etc.) to its connected guest.
This change adds the ability to specify the EDID name for a particular
virtio-vga display. Previously, every virtual display would have the same
name: "QEMU Monitor". Now, we can inject names of displays in order to test
guest behavior that is specific to display names. We provide the ability to
inject the display name from the frontend since this is guest visible
data. Furthermore, this makes it clear where N potential display outputs
would get their name from (which will be added in a future change).
Note that we have elected to use a struct here for output data for
extensibility - we intend to add per-output fields like resolution in a
future change.
It should be noted that EDID names longer than 12 bytes will be truncated
per spec (I think?).
Testing: verified that when I specified 2 outputs for a virtio-gpu with
edid_name set, the names matched those that I configured with my vnc
display.
-display vnc=localhost:0,id=aaa,display=vga,head=0 \
-display vnc=localhost:1,id=bbb,display=vga,head=1 \
-device '{"driver":"virtio-vga",
"max_outputs":2,
"id":"vga",
"outputs":[
{
"name":"AAA"
},
{
"name":"BBB"
}
]}'
Signed-off-by: Andrew Keesler <ankeesler@google.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250709121126.2946088-2-ankeesler@google.com>
If an ESP command is issued in an incorrect mode then an illegal command
interrupt should be generated. Add a new esp_cmd_is_valid() function to
indicate whether the ESP command is valid for the current mode, and if not
then raise the illegal command interrupt.
This fixes WinNT MIPS which issues ICCS after a Chip Reset which is not
permitted, but will fail with an INACCESSIBLE_BOOT_DEVICE error unless an
interrupt is generated.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 83428f7a97 ("esp.c: move write_response() non-DMA logic to esp_do_nodma()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2464
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250711204636.542964-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a new asc_mode property to ESPState which indicates the current mode of
the ESP and update the ESP state machine accordingly.
Bump the vmstate version and include migration logic to ensure that asc_mode
is set to initiator mode such that any commands in progress will always
continue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250711204636.542964-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is not needed as it is now handled by the OBJECT_DECLARE_SIMPLE_TYPE() macro.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250711204636.542964-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* rust: qemu-api-macros: cleanup and add unit tests for TryInto
* rust: log: implement io::Write, avoid memory allocations
when logging constant strings
* target/i386: fix usage of properties whenever accelerators
change the default (e.g. vendor)
* target/i386: add support for TDVMCALL_SETUP_EVENT_NOTIFY_INTERRUPT
* target/i386: add support for booting an SEV VM from an IGVM file
* target/i386: unify cache model descriptions between CPUID 2,
CPUID 4 and AMD specific CPUID 0x80000006
* target/i386: introduce cache models for recent Intel CPU models
* target/i386: mark some 0x80000000-0x80000008 bits as reserved on Intel
* target/i386: cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmh0v+sUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOQUQf8CTsCnl2xYrnrkVfSVj6kuAE+JYD6
oLSXsOEG4yrVknuhwIfVsqNScmleJCdz85ej7CZxy3vzzgjLfmy7nwifKEIKku7E
XO/Q3HbB898MnzqceQRmwe1AzELoj1Lave215CPhUBo60LCRPwaIZsiHprnNZgXi
TyHlmywDVRjyFLtKkx3El0dnLAhFqPWeGh81CD5lPLZZJ+Wt2FuAw2zqSOGB2ztM
FkJmunFJiaTItjyCN/uNvBSbDKecAHgCXvSCVNG3+I4U2R0gK1lcwm3TRo7yKia+
HUHGa3UEXoIqlRfXdX6zuc8tW1/u6SPv+8WX53t204PAeSWDUrtIe9jZ4A==
=y4/a
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* rust: miscellaneous fixes
* rust: qemu-api-macros: cleanup and add unit tests for TryInto
* rust: log: implement io::Write, avoid memory allocations
when logging constant strings
* target/i386: fix usage of properties whenever accelerators
change the default (e.g. vendor)
* target/i386: add support for TDVMCALL_SETUP_EVENT_NOTIFY_INTERRUPT
* target/i386: add support for booting an SEV VM from an IGVM file
* target/i386: unify cache model descriptions between CPUID 2,
CPUID 4 and AMD specific CPUID 0x80000006
* target/i386: introduce cache models for recent Intel CPU models
* target/i386: mark some 0x80000000-0x80000008 bits as reserved on Intel
* target/i386: cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmh0v+sUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOQUQf8CTsCnl2xYrnrkVfSVj6kuAE+JYD6
# oLSXsOEG4yrVknuhwIfVsqNScmleJCdz85ej7CZxy3vzzgjLfmy7nwifKEIKku7E
# XO/Q3HbB898MnzqceQRmwe1AzELoj1Lave215CPhUBo60LCRPwaIZsiHprnNZgXi
# TyHlmywDVRjyFLtKkx3El0dnLAhFqPWeGh81CD5lPLZZJ+Wt2FuAw2zqSOGB2ztM
# FkJmunFJiaTItjyCN/uNvBSbDKecAHgCXvSCVNG3+I4U2R0gK1lcwm3TRo7yKia+
# HUHGa3UEXoIqlRfXdX6zuc8tW1/u6SPv+8WX53t204PAeSWDUrtIe9jZ4A==
# =y4/a
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 14 Jul 2025 04:29:31 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (77 commits)
i386/cpu: Honor maximum value for CPUID.8000001DH.EAX[25:14]
i386/cpu: Fix overflow of cache topology fields in CPUID.04H
i386/cpu: Fix cpu number overflow in CPUID.01H.EBX[23:16]
i386/cpu: Fix number of addressable IDs field for CPUID.01H.EBX[23:16]
i386/cpu: Reorder CPUID leaves in cpu_x86_cpuid()
tests/vm: bump FreeBSD image to 14.3
tests/functional: test_x86_cpu_model_versions: remove dead tests
i386/cpu: Mark CPUID 0x80000008 ECX bits[0:7] & [12:15] as reserved for Intel/Zhaoxin
i386/cpu: Mark CPUID 0x80000007[EBX] as reserved for Intel
i386/cpu: Mark EBX/ECX/EDX in CPUID 0x80000000 leaf as reserved for Intel
i386/cpu: Enable 0x1f leaf for YongFeng by default
i386/cpu: Enable 0x1f leaf for SapphireRapids by default
i386/cpu: Enable 0x1f leaf for GraniteRapids by default
i386/cpu: Enable 0x1f leaf for SierraForest by default
i386/cpu: Enable 0x1f leaf for SierraForest by default
i386/cpu: Add a "x-force-cpuid-0x1f" property
i386/cpu: Introduce cache model for YongFeng
i386/cpu: Introduce cache model for SapphireRapids
i386/cpu: Introduce cache model for GraniteRapids
i386/cpu: Introduce cache model for SierraForest
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The ACPI SPCR (Serial Port Console Redirection) table allows firmware
to specify a preferred serial console device to the operating system.
On ARM64 systems, Linux by default respects this table: even if the
kernel command line does not include a hardware serial console (e.g.,
"console=ttyAMA0"), the kernel still register the serial device
referenced by SPCR as a printk console.
While this behavior is standard-compliant, it can lead to situations
where guest console behavior is influenced by platform firmware rather
than user-specified configuration. To make guest console behavior more
predictable and under user control, this patch introduces a machine
option to explicitly disable SPCR table exposure:
-machine spcr=off
By default, the option is enabled (spcr=on), preserving existing
behavior. When disabled, QEMU will omit the SPCR table from the guest's
ACPI namespace, ensuring that only consoles explicitly declared in the
kernel command line are registered.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20250528105404.457729-2-me@linux.beauty>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we have a server running disk requests that is for whatever reason
hanging or not able to process any more IO requests but still has some
in-flight requests previously issued by the guest OS, QEMU will still
try to drain the vring before shutting down even if it was explicitly
asked to do a "force shutdown" via SIGTERM or QMP quit. This is not
useful since the guest is no longer running at this point since it was
killed by QEMU earlier in the process. At this point, we don't care
about whatever in-flight IO it might have pending, we just want QEMU
to shut down.
Add an option called "skip-get-vring-base-on-force-shutdown" to allow
SIGTERM/QMP quit() to actually act like a "force shutdown" at least
for vhost-user-blk devices since those require the drain operation
to shut down gracefully unlike, for example, network devices.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20250609212547.2859224-4-d-tatianin@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds an ability to skip GET_VRING_BASE during device stop entirely,
and thus the expensive drain operation that this call entails as well,
which may be useful during a non-graceful shutdown in case the guest
operating system hangs or refuses to react to a previously requested
ACPI shutdown for whatever reason.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20250609212547.2859224-3-d-tatianin@yandex-team.ru>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By default, virtio-net limits the hash types that will be advertised to
the guest so that all hash types are covered by the offloading
capability the client provides. This change allows to override this
behavior and to advertise hash types that require user-space hash
calculation by specifying "on" for the corresponding properties.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-6-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve peer hashing capability instead of hardcoding.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-4-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DEFINE_PROP_ON_OFF_AUTO_BIT64() corresponds to DEFINE_PROP_ON_OFF_AUTO()
as DEFINE_PROP_BIT64() corresponds to DEFINE_PROP_BOOL(). The difference
is that DEFINE_PROP_ON_OFF_AUTO_BIT64() exposes OnOffAuto instead of
bool.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250530-vdpa-v1-1-5af4109b1c19@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a boolean is_vhost_user field to the vhost_net
structure. This flag is initialized during vhost_net_init based
on whether the backend is vhost-user.
This refactoring simplifies checks for vhost-user specific behavior,
replacing direct comparisons of 'net->nc->info->type' with the new
flag. It improves readability and encapsulates the backend type
information directly within the vhost_net instance.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This commit refactors how the maximum transmit queue size for
virtio-net devices is determined, making the mechanism more generic
and extensible.
Previously, virtio_net_max_tx_queue_size() contained hardcoded
checks for specific network backend types (vhost-user and
vhost-vdpa) to determine their supported maximum queue size. This
created direct dependencies and would require modifications for
every new backend that supports variable queue sizes.
To improve flexibility, a new max_tx_queue_size field is added
to the vhost_net structure. This allows each network backend
to advertise its supported maximum transmit queue size directly.
The virtio_net_max_tx_queue_size() function now retrieves the max
TX queue size from the vhost_net struct, if available and set.
Otherwise, it defaults to VIRTIO_NET_TX_QUEUE_DEFAULT_SIZE.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This commit introduces a save_acked_features function pointer to
vhost_net and converts the vhost_net function into a generic dispatcher.
The vhost-user backend provides the callback, making its function static.
With this change, no other module has a direct dependency on the
vhost-user implementation.
This cleanup allows for the complete removal of the net/vhost-user.h
header file.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, the vhost_net_get_feature_bits() function in
hw/net/vhost_net.c used a large switch statement to determine
the appropriate feature bits based on the NetClientDriver type.
This created unnecessary coupling between the generic vhost layer
and specific network backends (like TAP, vhost-user, and
vhost-vdpa).
This patch moves the definition of vhost feature bits directly into the
vhost_net structure for each relevant network client.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio_net_pre_load_queues() inspects vdev->guest_features to tell if
VIRTIO_NET_F_RSS or VIRTIO_NET_F_MQ is enabled to infer the required
number of queues. This works for VIRTIO_NET_F_MQ but it doesn't for
VIRTIO_NET_F_RSS because only the lowest 32 bits of vdev->guest_features
is set at the point and VIRTIO_NET_F_RSS uses bit 60 while
VIRTIO_NET_F_MQ uses bit 22.
Instead of inferring the required number of queues from
vdev->guest_features, use the number loaded from the vm state. This
change also has a nice side effect to remove a duplicate peer queue
pair change by circumventing virtio_net_set_multiqueue().
Also update the comment in include/hw/virtio/virtio.h to prevent an
implementation of pre_load_queues() from refering to any fields being
loaded during migration by accident in the future.
Fixes: 8c49756825 ("virtio-net: Add only one queue pair when realizing")
Tested-by: Lei Yang <leiyang@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* New board type max78000fthr
* Enable use of CXL on Arm 'virt' board
* Some more tidyup of ID register handling
* Refactor AT insns and PMU regs into separate source files
* Don't enforce NSE,NS check for EL3->EL3 returns
* hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
* Allow nested-virtualization with KVM on the 'virt' board
* system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
* hw/arm/virt-acpi-build: Don't create ITS id mappings by default
* target/arm: Remove unused helper_sme2_luti4_4b
-----BEGIN PGP SIGNATURE-----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=hJ4/
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250711' of https://gitlab.com/pm215/qemu into staging
target-arm queue:
* New board type max78000fthr
* Enable use of CXL on Arm 'virt' board
* Some more tidyup of ID register handling
* Refactor AT insns and PMU regs into separate source files
* Don't enforce NSE,NS check for EL3->EL3 returns
* hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
* Allow nested-virtualization with KVM on the 'virt' board
* system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
* hw/arm/virt-acpi-build: Don't create ITS id mappings by default
* target/arm: Remove unused helper_sme2_luti4_4b
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmhxEcoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3j5yEACWYnNeqo8Yph6/EJExE6eV
# r0tC6FBb5ShPgA6kDxhpOc1lI6uXGh8+D7bL9BePEdz/brCf1QDfs2Z4q/hb5ysX
# D0H6VI5Gr1j6MjkFRBo3+vvYz4Yh++XLn5Q9lZv8zaSEdraq/ay2kxnuhRCK+4Ar
# +QoGtKrGMJ7UCpfiRlvNnd1UjgORZf10EE/bRImX13sxeDomP3CZhFzAyJyShOP9
# JA7bAd4rYJ4oj8R33y8Yaxjwm4FOndj740B0zwpO8mpjzFiE5zbqsaO+mEgYSflc
# OQisCu/KRFpyIR+UqP+4gNaJLfKQW5Y4r61zEaiJWV/c4RdKNnbK1f7MX11fNhOk
# k1paF3GIXp6f794Hb14vtsYnKHF2eeNSmRkAomXxLgUSYzLezL+yj7cdYmRJhgYU
# thc1PSiEmHYhjRmOaMC9+dkMtvIexWyDNYNFTygoOE5/kTMSazeTFQpFmw+ZuTee
# 9pjKsYRZJgTa64IkJy1L34jc2gds48Q20KpQsqZ22KQcjwt4PW4eQXkvMylawSut
# mArHVH6AAxIK+defeEmnQCJ0OccyGCENjRDuWyWMMGoP/ggZpO47rGWmCUOK8xz8
# IfGdPeF/9xsKSKWvjpiHyyKa48wuO2bVC+5bISS6IPA2uGneS2DpmjkHU+gHBqpk
# GNlvEnXZfavZOHejE7/L/Q==
# =hJ4/
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 11 Jul 2025 09:29:46 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250711' of https://gitlab.com/pm215/qemu: (36 commits)
tests/functional: Add a test for the MAX78000 arm machine
docs/system: arm: Add max78000 board description
target/arm: Remove helper_sme2_luti4_4b
hw/arm/virt-acpi-build: Don't create ITS id mappings by default
system/qdev: Remove pointless NULL check in qdev_device_add_from_qdict
hw/arm/virt: Allow virt extensions with KVM
hw/arm/arm_gicv3_kvm: Add a migration blocker with kvm nested virt
target/arm: Enable feature ARM_FEATURE_EL2 if EL2 is supported
target/arm/kvm: Add helper to detect EL2 when using KVM
hw/arm: Allow setting KVM vGIC maintenance IRQ
hw/arm/fsl-imx8mp: Wire VIRQ and VFIQ
target/arm: Don't enforce NSE,NS check for EL3->EL3 returns
target/arm: Split out performance monitor regs to cpregs-pmu.c
target/arm: Split out AT insns to tcg/cpregs-at.c
target/arm: Drop stub for define_tlb_insn_regs
arm/kvm: shorten one overly long line
arm/cpu: store clidr into the idregs array
arm/cpu: fix trailing ',' for SET_IDREG
arm/cpu: store id_aa64afr{0,1} into the idregs array
arm/cpu: store id_afr0 into the idregs array
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
An IGVM file contains configuration of guest state that should be
applied during configuration of the guest, before the guest is started.
This patch allows the user to add an igvm-cfg object to an X86 machine
configuration that allows an IGVM file to be configured that will be
applied to the guest before it is started.
If an IGVM configuration is provided then the IGVM file is processed at
the end of the board initialization, before the state transition to
PHASE_MACHINE_INITIALIZED.
Signed-off-by: Roy Hopkins <roy.hopkins@randomman.co.uk>
Acked-by: Gerd Hoffman <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/23bc66ae4504ba5cf2134826e055b25df3fc9cd9.1751554099.git.roy.hopkins@randomman.co.uk
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
