Add support for redistributing a presented group interrupt if it
is precluded as a result of changing the CPPR value. Without this,
group interrupts can be lost.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-27-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Booting AIX in a PowerVM partition requires the use of the "Acknowledge
O/S Interrupt to even O/S reporting line" special operation provided by
the IBM XIVE interrupt controller. This operation is invoked by writing
a byte (data is irrelevant) to offset 0xC10 of the Thread Interrupt
Management Area (TIMA). It can be used by software to notify the XIVE
logic that the interrupt was received.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-26-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Change pregs to pool_regs, for clarity.
[npiggin: split from larger patch]
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-25-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add more tracing around notification, redistribution, and escalation.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-24-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When an XIVE context is pulled while it has an active, unacknowledged
group interrupt, XIVE will check to see if a context on another thread
can handle the interrupt and, if so, notify that context. If there
are no contexts that can handle the interrupt, then the interrupt is
added to a backlog and XIVE will attempt to escalate the interrupt,
if configured to do so, allowing the higher privileged handler to
activate a context that can handle the original interrupt.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-23-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Adds support for extracting additional configuration flags from
the XIVE configuration register that are needed for redistribution
of group interrupts.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-22-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Writes to the Flush Control registers were logged as invalid
when they are allowed. Clearing the unsupported want_cache_disable
feature is supported, so don't log an error in that case.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-21-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Firmware expects to read back the WATCH_FULL bit from the VC_ENDC_WATCH_SPEC
register, so don't clear it on read.
Don't bother clearing the reads-as-zero CONFLICT bit because it's masked
at write already.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-20-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This can make it easier to see what the target system is trying to
do.
[npiggin: split from larger patch]
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-19-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add support for XIVE ESB Interrupt Escalation.
Suggested-by: Michael Kowal <kowal@linux.ibm.com>
[This change was taken from a patch provided by Michael Kowal.]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-18-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This improves the implementation of pulling pool and phys contexts in
XIVE1, by following closer the OS pulling code.
In particular, the old ring data is returned rather than the modified,
and irq signals are reset on pull.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-17-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rather than functions to return masks to test NSR bits, have functions
to test those bits directly. This should be no functional change, it
just makes the code more readable.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-16-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Have xive_tctx_accept clear NSR in one shot rather than masking out bits
as they are tested, which makes it clear it's reset to 0, and does not
have a partial NSR value in the register.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-15-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
If CPPR is lowered to preclude the pending interrupt, NSR should be
cleared and the qemu_irq should be lowered. This avoids some cases
of supurious interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-14-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The group interrupt delivery flow selects the group backlog scan if
LSMFB < IPB, but that scan may find an interrupt with a priority >=
IPB. In that case, the VP-direct interrupt should be chosen. This
extends to selecting the lowest prio between POOL and PHYS rings.
Implement this just by re-starting the selection logic if the
backlog irq was not found or priority did not match LSMFB (LSMFB
is updated so next time around it would see the right value and
not loop infinitely).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-13-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Group interrupts should not be taken from the backlog and presented
if they are precluded by CPPR.
Fixes: 855434b3b8 ("ppc/xive2: Process group backlog when pushing an OS context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-12-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the XIVE spec, updating the CPPR should also update the
PIPR. The final value of the PIPR depends on other factors, but it
should never be set to a value that is above the CPPR.
Also added support for redistributing an active group interrupt when it
is precluded as a result of changing the CPPR value.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-11-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A problem was seen where uart interrupts would be lost resulting in the
console hanging. Traces showed that a lower priority interrupt was
preempting a higher priority interrupt, which would result in the higher
priority interrupt never being handled.
The new interrupt's priority was being compared against the CPPR
(Current Processor Priority Register) instead of the PIPR (Post
Interrupt Priority Register), as was required by the XIVE spec.
This allowed for a window between raising an interrupt and ACK'ing
the interrupt where a lower priority interrupt could slip in.
Fixes: 26c55b9941 ("ppc/xive2: Process group backlog when updating the CPPR")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-10-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The current xive algorithm for finding a matching group vCPU
target always uses the first vCPU found. And, since it always
starts the search with thread 0 of a core, thread 0 is almost
always used to handle group interrupts. This can lead to additional
interrupt latency and poor performance for interrupt intensive
work loads.
Changing this to use a simple round-robin algorithm for deciding which
thread number to use when starting a search, which leads to a more
distributed use of threads for handling group interrupts.
[npiggin: Also round-robin among threads, not just cores]
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-9-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the END Event Queue wraps the END EQ Generation bit is flipped and the
Generation Flipped bit is set to one. On a END cache Watch read operation,
the Generation Flipped bit needs to be reset.
While debugging an error modified END not valid error messages to include
the method since all were the same.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-8-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Test that the NSR exception bit field is equal to the pool ring value,
rather than any common bits set, which is more correct (although there
is no practical bug because the LSI NSR type is not implemented and
POOL/PHYS NSR are encoded with exclusive bits).
Fixes: 4c3ccac636 ("pnv/xive: Add special handling for pool targets")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-7-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pushing a context and loading IPB from NVP is defined to merge ('or')
that IPB into the TIMA IPB register. PIPR should therefore be calculated
based on the final IPB value, not just the NVP value.
Fixes: 9d2b6058c5 ("ppc/xive2: Add grouping level to notification")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-6-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In a multi chip environment there will be remote/forwarded VSDs. The check
to find a matching INT controller (XIVE) of the remote block number was
checking the INTs chip number. Block numbers are not tied to a chip number.
The matching remote INT is the one that matches the forwarded VSD address
with VSD types associated MMIO BAR.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-5-npiggin@gmail.com
[ clg: Fixed log format in pnv_xive2_get_remote() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The queue size of an Event Notification Descriptor (END)
is determined by the 'cl' and QsZ fields of the END.
If the cl field is 1, then the queue size (in bytes) will
be the size of a cache line 128B * 2^QsZ and QsZ is limited
to 4. Otherwise, it will be 4096B * 2^QsZ with QsZ limited
to 12.
Fixes: f8a233dedf ("ppc/xive2: Introduce a XIVE2 core framework")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-4-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250717104105.2656786-1-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Of most importance is that this gives us a heads-up if anything
we rely on has been deprecated. The default python behaviour
only emits a warning if triggered from __main__ which is very
limited.
Setting the env variable further ensures that any python child
processes will also display warnings.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250715143023.1851000-11-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The multiprocess and virtio_gpu tests open sockets but then forget
to close them, which triggers resource leak warnings
The virtio_gpu test also fails to close a log file it opens.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250715143023.1851000-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This avoids a resource leak warning from python when the
log handler is garbage collected.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250715143023.1851000-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
KVM support for 32-bit arm has been dropped a while ago, so we don't
need these headers in QEMU anymore.
Fixes: 82bf7ae84c ("target/arm: Remove KVM support for 32-bit Arm hosts")
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250710120035.169376-1-thuth@redhat.com>
The "err" variable was declared but never used within the
chr_closed_bh() function. This resulted in a dead code
warning (CID 1612365) from Coverity.
Remove the unused variable and the associated error block
to resolve the issue.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This was flagged by Coverity as a memory illegal access.
Initialize the pointer to NULL at declaration.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If g_remove() fails, use warn_report() to log an error.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In passt_vhost_user_start(), if vhost_net_init() fails, the "net"
variable is NULL and execution jumps to the "err:" label.
The cleanup code within this label is conditioned on "if (net)",
which can never be true in this error case. This makes the cleanup
block dead code, as reported by Coverity (CID 1612371).
Refactor the error handling to occur inline, removing the goto and
the unreachable cleanup block.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "err" variable was declared but never used within the
net_vhost_user_event() function. This resulted in a dead code
warning (CID 1612372) from Coverity.
Remove the unused variable and the associated error block
to resolve the issue.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "err" variable was declared but never used within the
passt_vhost_user_event() function. This resulted in a dead code
warning (CID 1612375) from Coverity.
Remove the unused variable and the associated error block
to resolve the issue.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We use the local variable 'buf' only when we call dma_memory_read(),
and it is always set to &tx_send_buffer[prev_buf_size] immediately
before both of those calls. So remove the variable and pass
tx_send_buffer + prev_buf_size to dma_memory_read().
This fixes in passing a place where we set buf = tx_send_buffer
but never used that value because we always updated buf to
something else later before using it.
Coverity: CID 1534027
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In gmac_try_send_next_packet() we have code that does "if this block
of data won't fit in the buffer, reallocate it". However, the
condition it uses is
if ((prev_buf_size + tx_buf_len) > sizeof(buf))
where buf is a uint8_t *.
This means that sizeof(buf) is always 8 bytes, and the condition will
almost always be true, so we will reallocate the buffer more often
than we need to.
Correct the condition to test against tx_buffer_size, which is
where we track how big the allocated buffer is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
After the bug fix in the previous commit, the length and prev_buf_size
variables are identical, except that prev_buf_size is uint32_t and
length is uint16_t. We can therefore unify them. The only place where
the type makes a difference is that we will truncate the packet
at 64K when sending it; this commit preserves that behaviour
by using a local variable when doing the packet send.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The transmit loop in gmac_try_send_next_packet() is constructed in a
way that means it will send incorrect data if it it sends more than
one packet.
The function assembles the outbound data in a dynamically allocated
block of memory which is pointed to by tx_send_buffer. We track the
first point in this block of memory which is not yet used with the
prev_buf_size offset, initially zero. We track the size of the
packet we're sending with the length variable, also initially zero.
As we read chunks of data out of guest memory, we write them to
tx_send_buffer[prev_buf_size], and then increment both prev_buf_size
and length. (We might dynamically reallocate the buffer if needed.)
When we send a packet, we checksum and send length bytes, starting at
tx_send_buffer, and then we reset length to 0. This gives the right
data for the first packet. But we don't reset prev_buf_size. This
means that if we process more descriptors with further data for the
next packet, that data will continue to accumulate at offset
prev_buf_size, i.e. after the data for the first packet. But when
we transmit that second packet, we send length bytes from
tx_send_buffer, so we will send a packet which has the length of the
second packet but the data of the first one.
The fix for this is to also clear prev_buf_size after the packet has
been sent -- we never need the data from packet one after we've sent
it, so we can write packet two's data starting at the beginning of
the buffer.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_init_tap intends to return 0 for success and -1 on error. However,
when net_init_tap() succeeds for a multi-queue device, it returns 1,
because of this code where ret becomes 1 when g_unix_set_fd_nonblocking
succeeds:
ret = g_unix_set_fd_nonblocking(fd, true, NULL);
if (!ret) {
... error ...
free_fail:
...
return ret;
Luckily, the only current call site checks for negative, rather than non-zero:
net_client_init1()
if (net_client_init_fun[](...) < 0)
Also, in the unlikely case that g_unix_set_fd_nonblocking fails and returns
false, ret=0 is returned, and net_client_init1 will use a broken interface.
Fix it to be future proof.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Theoretically tap_read_packet() may return size less than
s->host_vnet_hdr_len, and next, we'll work with negative size
(in case of !s->using_vnet_hdr). Let's avoid it.
Don't proceed with size == s->host_vnet_hdr_len as well in case
of !s->using_vnet_hdr, it doesn't make sense.
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ramfb is a sysbus device so it can only used for machine types where it
is explicitly enabled:
# git grep machine_class_allow_dynamic_sysbus_dev.*TYPE_RAMFB_DEVICE
hw/arm/virt.c: machine_class_allow_dynamic_sysbus_dev(mc,
TYPE_RAMFB_DEVICE);
hw/i386/microvm.c: machine_class_allow_dynamic_sysbus_dev(mc,
TYPE_RAMFB_DEVICE);
hw/i386/pc_piix.c: machine_class_allow_dynamic_sysbus_dev(m,
TYPE_RAMFB_DEVICE);
hw/i386/pc_q35.c: machine_class_allow_dynamic_sysbus_dev(m,
TYPE_RAMFB_DEVICE);
hw/loongarch/virt.c: machine_class_allow_dynamic_sysbus_dev(mc,
TYPE_RAMFB_DEVICE);
hw/riscv/virt.c: machine_class_allow_dynamic_sysbus_dev(mc,
TYPE_RAMFB_DEVICE);
So these six are the only machine types we have to worry about.
The three x86 machine types (pc, q35, microvm) will actually use the rom
(when booting with seabios).
For arm/riscv/loongarch virt we want to disable the rom.
This patch sets ramfb romfile option to false by default, except for x86
machines types (pc, q35, microvm) which need the rom file when booting
with seabios and machine types <= 10.0 (handling the case of arm virt,
for compat reasons).
At the same time, set the "use-legacy-x86-rom" property to true on those
historical versioned machine types in order to avoid the memory layout
being changed.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Message-ID: <20250717100941.2230408-4-shahuang@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the TYPE_* to a new file hw/vfio/types.h because the
TYPE_VFIO_PCI will be used in later patch, but directly include the
hw/vfio/pci.h can cause some compilation error when cross build the
windows version.
The hw/vfio/types.h can be included to mitigate that problem.
Signed-off-by: Shaoqin Huang <shahuang@redhat.com>
Message-ID: <20250717100941.2230408-3-shahuang@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>") added
redundant qemu_mutex_init(&tdx->lock) in tdx_guest_init by mistake.
Fix it by removing the redundant one.
Fixes: 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250717103707.688929-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of host_cpu_max_instance_init() was merged into
host_cpu_instance_init() by commit 29f1ba338b ("target/i386: merge
host_cpu_instance_init() and host_cpu_max_instance_init()"), while the
declaration of it remains in host-cpu.h.
Clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250716063117.602050-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take tdx_guest->lock when injecting the event notification interrupt into
the guest.
Fixes CID 1612364.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
