Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS specific image_info struct fields fp_abi and interp_fp_abi
to store executable and interpreter fp_abi values (based on kernel
struct arch_elf_state in mips/include/asm/elf.h).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS_ABI_FP_UNKNOWN as QEMU internal value to represent
unknown fp_abi (based on kernel mips/include/asm/elf.h definition)
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add prefix, suffix, operation descriptions, and other corrections
and amendments to the comment that describes MXU ASE.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MXU_EN check to the main MXU decoding function, to avoid code
repetition.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32LDD and S32LDDR MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Adds support for emulating the Q8MUL and Q8MULSU MXU instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MAC MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the D16MUL MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S8LDD MXU instruction.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move MUL, S32M2I, S32I2M handling out of switch. These are all
instructions that do not depend on MXU_EN flag of MXU_CR.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add support for emulating the S32I2M and S32M2I MXU instructions.
This commit also contains utility functions for reading/writing
to MXU registers. This is required for overall MXU instruction
support.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU execute 2-bit add/subtract pattern 'eptn2'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add bit encoding for MXU accumulate add/subtract 1-bit pattern
'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MXU decoding engine: add handlers for all instruction pools,
and main decode handler. The handlers, for now, for the purpose
of this patch, contain only sceleton in the form of a single
switch statement.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Provide the placeholder and add the invocation logic for MXU
decoding engine.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Amend MXU instruction opcodes. Pool04 is actually only instruction
OPC_MXU_S16MAD. Two cases within S16MAD are recognized by 1-bit
subfield 'aptn1'.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define a bit for MXU in insn_flags. This is the first non-MIPS
(third party) ASE supported in QEMU for MIPS, so it is placed in
the section "bits 56-63: vendor-specific ASEs".
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Define and initialize the 16 MXU registers - 15 general computational
register, and 1 control register). There is also a zero register, but
it does not have any corresponding variable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Craig Janeczek <jancraig@amazon.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Coverity found two fallthroughs that miss break statement. Fix them.
Revieved-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAlvTIXEQHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxlRqB/99FX5texTlvPy2yH8jC6eXWt1XzcqVc9Ei
TPHJ3LLR7EqjTBD/NCgvRzed4D0U2uRm8rXssujJPUnqt9hmlpNPzIEqLeV650hB
QBWWC8rrxzPMGKbQzBE0b/bbAaXW4KFsBXicmrTJz6MCN12S4yGwMJg3B7yAeXtp
2cVjhmoXiynx7qsWjKl8+hvSmCSMYvsfNygHGbFaLdr/CB8+ug/5fRg2yrhWz68U
emcjljgHRiZpKy8Kn0F0lKTPqKCYi0EVxoDk424c2Ag+oGZsxvhJMolPooOWVXCX
8bfmzyRR2aPi9m8bfp42+yqYYopD/ncr2zF65+6OYtTA2GfxiywG
=wIx1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/testing-pull-request' into staging
Testing patches
One fix for mingw build and some improvements in VM based testing, many thanks
to Paolo and Phil.
# gpg: Signature made Fri 26 Oct 2018 15:15:13 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/testing-pull-request:
tests/vm: Do not abuse parallelism when HOST != TARGET architecture
tests/vm: Do not use -enable-kvm if HOST != TARGET architecture
tests/vm: Let kvm_available() work in cross environments
tests/vm: Add a BaseVM::arch property
tests/vm: Display remaining seconds to wait for a VM to start
tests/vm: Do not use the -smp option with a single cpu
tests/vm: Do not abuse parallelism when KVM is not available
tests/vm: Extract the kvm_available() handy function
tests: docker: update test-mingw for GTK+ 2.0 removal
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0iQKAAoJENSXKoln91plUngH/icGvr5sa6JbT/4bDP20Wv7y
gwJ8Ax6kKDU4Z/JbBt+2diXVRrPXCF6xt/dvcaWCnxKyjIZN0i2azHv75jtMEA5t
+khdqqREzTZ8RiEI+u0r+OkSNJ3837O+ahQFdRxjqSDIScC8mcwW8h1md9ThjzbQ
yBhRvNo8QkXGGx9MCWZ7kUGkPnJDQnL0jGiFj0xhtyDSGXfnnOpUgpQKRWu5cQzl
Q7JKFPQgt676kd6UyG7f+xYw/a6uERmMBWp30CfN6bP4bPcdFHdUlgIM60VRAfhA
qYA4led5sWcuqmA96PoZIOc+05/8Q8NkgP+nYbXeMkW8/9QOCPa/30p7QayOpZA=
=F4up
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-3' into staging
MIPS queue for October 2018 - part 3
# gpg: Signature made Thu 25 Oct 2018 21:14:02 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-3:
target/mips: Add disassembler support for nanoMIPS
target/mips: Implement emulation of nanoMIPS EVA instructions
target/mips: Add nanoMIPS CRC32 instruction pool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'arch' property gives a hint on which architecture the guest image runs.
This can be use to select the correct QEMU binary path.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181013004034.6968-6-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
--with-gtkabi does not exist anymore; remove it from the configure invocation.
Fixes: 89d85cde75
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1539886203-33670-1-git-send-email-pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Implement emulation of nanoMIPS EVA instructions. They are all
part of P.LS.E0 instruction pool, or one of its subpools.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
This pull request contains a handful of patches that have been floating
around various trees for a while but haven't made it upstream. These
patches all appear quite safe. They're all somewhat independent from
each other:
* One refactors our IRQ management function to allow multiple interrupts
to be raised an once. This patch has no functional difference.
* Cleaning up the op_helper/cpu_helper split. This patch has no
functional difference.
* Updates to various constants to keep them in sync with the latest ISA
specification and to remove some non-standard bits that snuck in.
* A fix for a memory leak in the PLIC driver.
* A fix to our device tree handling to avoid provinging a NULL string.
I've given this my standard test: building the port, booting a Fedora
root filesytem on the latest Linux tag, and then shutting down that
image. Essentially I'm just following the QEMU RISC-V wiki page's
instructions. Everything looks fine here.
We have a lot more outstanding patches so I'll definately be submitting
another PR for the soft freeze.
-----BEGIN PGP SIGNATURE-----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=+IgM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-sf0' into staging
First RISC-V Patch Set for the 3.1 Soft Freeze
This pull request contains a handful of patches that have been floating
around various trees for a while but haven't made it upstream. These
patches all appear quite safe. They're all somewhat independent from
each other:
* One refactors our IRQ management function to allow multiple interrupts
to be raised an once. This patch has no functional difference.
* Cleaning up the op_helper/cpu_helper split. This patch has no
functional difference.
* Updates to various constants to keep them in sync with the latest ISA
specification and to remove some non-standard bits that snuck in.
* A fix for a memory leak in the PLIC driver.
* A fix to our device tree handling to avoid provinging a NULL string.
I've given this my standard test: building the port, booting a Fedora
root filesytem on the latest Linux tag, and then shutting down that
image. Essentially I'm just following the QEMU RISC-V wiki page's
instructions. Everything looks fine here.
We have a lot more outstanding patches so I'll definately be submitting
another PR for the soft freeze.
# gpg: Signature made Wed 17 Oct 2018 21:17:52 BST
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/riscv/tags/riscv-for-master-3.1-sf0:
RISC-V: Don't add NULL bootargs to device-tree
RISC-V: Add missing free for plic_hart_config
RISC-V: Update CSR and interrupt definitions
RISC-V: Move non-ops from op_helper to cpu_helper
RISC-V: Allow setting and clearing multiple irqs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The XTS cipher mode performance is approximately doubled and test
coverage is improved.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJb0LRUAAoJEL6G67QVEE/fW0kQAKztZpe9TxQMIzQNlBtYJiUF
51Xit4GVj3jZ5An1HcxhfKxv3hbsKOdDifBw1I+F5c7Tfmid6M/8f9M+fZ0FmGiN
VsnkVNcckMbMck03C0llxigz24n3vxd8LvEQBR3ZA1sGAnWTSJNHfEmKZwh+5mX4
hT2WoFC2QGcwOyWUH5W9NtASbVgzr3/KWuCaluK/okmLHA+ENov3FetMWYPad848
FCjAvMLbC+S/AlkXwKTkn3L4+yow95yliyZHZXDiDS2QRP2u6fv39Q+0fYOayns1
cTgmggNNsRErsYMAGveX5+GoFfLtUdYDH9h6e4U77mxonZz9IL8iP8sFVZEUc3Md
syS3EPDQor+KBJF/opg0gR9IfY5cMoYUrW0huujX2uyOqQTl4yb0SAxzhPEP/gC7
BOW757WkRXMsNDZNdYAtHi+kp0PPA+zGl9QFTMFSQtRgnPHyO0gkLFgXFQartPcg
b6wpe+g+IwVdOzXjeYCJeP5WPD99pcxPsOcmHRfqopJq2fihm71czCFOg0uYjxZn
LwhLrAzge6/MrZFBHsCwpkkItJov0hKjUl5QJ0S4vEK4fRPawaBkcvR9QuTCo9Pb
xXdedxTKQYaBaXimV6ZsK4OpSZ/QR8FmwVeM33RUWzAz+SjtegzuvkXAA1Ic5XgI
nxnjod33d+jxrzPDrVMl
=K2kp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging
Improve performance of XTS cipher mode impl
The XTS cipher mode performance is approximately doubled and test
coverage is improved.
# gpg: Signature made Wed 24 Oct 2018 19:05:08 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: add testing for unaligned buffers with XTS cipher mode
crypto: refactor XTS cipher mode test suite
crypto: annotate xts_tweak_encdec as inlineable
crypto: convert xts_mult_x to use xts_uint128 type
crypto: convert xts_tweak_encdec to use xts_uint128 type
crypto: introduce a xts_uint128 data type
crypto: remove code duplication in tweak encrypt/decrypt
crypto: expand algorithm coverage for cipher benchmark
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Validate that the XTS cipher mode will correctly operate with plain
text, cipher text and IV buffers that are not 64-bit aligned.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current XTS test overloads two different tests in a single function
making the code a little hard to follow. Split it into distinct test
cases.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Encouraging the compiler to inline xts_tweak_encdec increases the
performance for xts-aes-128 when built with gcrypt:
Encrypt: 545 MB/s -> 580 MB/s
Decrypt: 568 MB/s -> 602 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 355 MB/s -> 545 MB/s
Decrypt: 362 MB/s -> 568 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using 64-bit arithmetic increases the performance for xts-aes-128
when built with gcrypt:
Encrypt: 272 MB/s -> 355 MB/s
Decrypt: 275 MB/s -> 362 MB/s
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
