Prefer runtime helpers to get target page size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250305153929.43687-3-philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250311085743.21724-5-philmd@linaro.org
Signed-off-by: Cédric Le Goater <clg@redhat.com>
<linux/kvm.h> is already included by "system/kvm.h" in the next line.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20250307180337.14811-3-philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250311085743.21724-3-philmd@linaro.org
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Both qemu_minrampagesize() and qemu_maxrampagesize() are
related to host memory backends, having the following call
stack:
qemu_minrampagesize()
-> find_min_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
qemu_maxrampagesize()
-> find_max_backend_pagesize()
-> object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)
Having TYPE_MEMORY_BACKEND defined in "system/hostmem.h":
include/system/hostmem.h:23:#define TYPE_MEMORY_BACKEND "memory-backend"
Move their prototype declaration to "system/hostmem.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20250308230917.18907-7-philmd@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250311085743.21724-2-philmd@linaro.org
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Wire data commonly use BE byte order (including in the existing migration
protocol), use it also for for VFIO device state packets.
This will allow VFIO multifd device state transfer between hosts with
different endianness.
Although currently there is no such use case, it's good to have it now
for completeness.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/qemu-devel/dcfc04cc1a50655650dbac8398e2742ada84ee39.1741611079.git.maciej.szmigiero@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The KVMGT/GVT-g vGPU also exposes OpRegion. But unlike IGD passthrough,
it only needs the OpRegion quirk. A previous change moved x-igd-opregion
handling to config quirk breaks KVMGT functionality as it brings extra
checks and applied other quirks. Here we check if the device is mdev
(KVMGT) or not (passthrough), and then applies corresponding quirks.
As before, users must manually specify x-igd-opregion=on to enable it
on KVMGT devices. In the future, we may check the VID/DID and enable
OpRegion automatically.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-11-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The LPC bridge/Host bridge IDs quirk is also not dependent on legacy
mode. Recent Windows driver no longer depends on these IDs, as well as
Linux i915 driver, while UEFI GOP seems still needs them. Make it an
option to allow users enabling and disabling it as needed.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-10-tomitamoeko@gmail.com
[ clg: - Fixed spelling in vfio_probe_igd_config_quirk() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Both enable OpRegion option (x-igd-opregion) and legacy mode require
setting up OpRegion copy for IGD devices. As the config quirk no longer
depends on legacy mode, we can now handle x-igd-opregion option there
instead of in vfio_realize.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-9-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
So far, IGD-specific quirks all require enabling legacy mode, which is
toggled by assigning IGD to 00:02.0. However, some quirks, like the BDSM
and GGC register quirks, should be applied to all supported IGD devices.
A new config option, x-igd-legacy-mode=[on|off|auto], is introduced to
control the legacy mode only quirks. The default value is "auto", which
keeps current behavior that enables legacy mode implicitly and continues
on error when all following conditions are met.
* Machine type is i440fx
* IGD device is at guest BDF 00:02.0
If any one of the conditions above is not met, the default behavior is
equivalent to "off", QEMU will fail immediately if any error occurs.
Users can also use "on" to force enabling legacy mode. It checks if all
the conditions above are met and set up legacy mode. QEMU will also fail
immediately on error in this case.
Additionally, the hotplug check in legacy mode is removed as hotplugging
IGD device is never supported, and it will be checked when enabling the
OpRegion quirk.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-8-tomitamoeko@gmail.com
[ clg: - Changed warn_report() by info_report() in
vfio_probe_igd_config_quirk() as suggested by Alex W.
- Fixed spelling in vfio_probe_igd_config_quirk () ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The actual IO BAR4 write quirk in vfio_probe_igd_bar4_quirk was removed
in previous change, leaving the function not matching its name, so move
it into the newly introduced vfio_config_quirk_setup. There is no
functional change in this commit.
For now, to align with current legacy mode behavior, it returns and
proceeds on error. Later it will fail on error after decoupling the
quirks from legacy mode.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-7-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
IGD devices require device-specific quirk to be applied to their PCI
config space. Currently, it is put in the BAR4 quirk that does nothing
to BAR4 itself. Add a placeholder for PCI config space quirks to hold
that quirk later.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-6-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A new option will soon be introduced to decouple the LPC bridge/Host
bridge ID quirk from legacy mode. To prepare for this, move the LPC
bridge initialization into a separate function.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-5-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Both x-igd-opregion option and legacy mode require identical steps to
set up OpRegion for IGD devices. Consolidate these steps into a single
vfio_pci_igd_setup_opregion function.
The function call in pci.c is wrapped with ifdef temporarily to prevent
build error for non-x86 archs, it will be removed after we decouple it
from legacy mode.
Additionally, move vfio_pci_igd_opregion_init to igd.c to prevent it
from being compiled in non-x86 builds.
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-4-tomitamoeko@gmail.com
[ clg: Fixed spelling in vfio_pci_igd_setup_opregion() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Though GTT Stolen Memory (GSM) is right below Data Stolen Memory (DSM)
in host address space, direct access to GSM is prohibited, and it is
not mapped to guest address space. Both host and guest accesses GSM
indirectly through the second half of MMIO BAR0 (GTTMMADR).
Guest firmware only need to reserve a memory region for DSM and program
the BDSM register with the base address of that region, that's actually
what both SeaBIOS[1] and IgdAssignmentDxe does now.
[1] https://gitlab.com/qemu-project/seabios/-/blob/1.12-stable/src/fw/pciinit.c#L319-332
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-3-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The IO BAR4 of IGD devices contains a pair of 32-bit address/data
registers, MMIO_Index (0x0) and MMIO_Data (0x4), which provide access
to the MMIO BAR0 (GTTMMADR) from IO space. These registers are probably
only used by the VBIOS, and are not documented by intel. The observed
layout of MMIO_Index register is:
31 2 1 0
+-------------------------------------------------------------------+
| Offset | Rsvd | Sel |
+-------------------------------------------------------------------+
- Offset: Byte offset in specified region, 4-byte aligned.
- Sel: Region selector
0: MMIO register region (first half of MMIO BAR0)
1: GTT region (second half of MMIO BAR0). Pre Gen11 only.
Currently, QEMU implements a quirk that adjusts the guest Data Stolen
Memory (DSM) region address to be (addr - host BDSM + guest BDSM) when
programming GTT entries via IO BAR4, assuming guest still programs GTT
with host DSM address, which is not the case. Guest's BDSM register is
emulated and initialized to 0 at startup by QEMU, then SeaBIOS programs
its value[1]. As result, the address programmed to GTT entries by VBIOS
running in guest are valid GPA, and this unnecessary adjustment brings
inconsistency.
[1] https://gitlab.com/qemu-project/seabios/-/blob/1.12-stable/src/fw/pciinit.c#L319-332
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Corvin Köhne <c.koehne@beckhoff.com>
Link: https://lore.kernel.org/qemu-devel/20250306180131.32970-2-tomitamoeko@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmfO1zkACgkQ7wSWWzmN
YhET+wf+PkaGeFTNUrOtWpl35fSMKlmOVbb1fkPfuhVBmeY2Vh1EIN3OjqnzdV0F
wxpuk+wwmFiuV1n6RNuMHQ0nz1mhgsSlZh93N5rArC/PUr3iViaT0cb82RjwxhaI
RODBhhy7V9WxEhT9hR8sCP2ky2mrKgcYbjiIEw+IvFZOVQa58rMr2h/cbAb/iH4l
7T9Wba03JBqOS6qgzSFZOMxvqnYdVjhqXN8M6W9ngRJOjPEAkTB6Evwep6anRjcM
mCUOgkf2sgQwKve8pYAeTMkzXFctvTc/qCU4ZbN8XcoKVVxe2jllGQqdOpMskPEf
slOuINeW5M0K5gyjsb/huqcOTfDI2A==
=/Y0+
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmfO1zkACgkQ7wSWWzmN
# YhET+wf+PkaGeFTNUrOtWpl35fSMKlmOVbb1fkPfuhVBmeY2Vh1EIN3OjqnzdV0F
# wxpuk+wwmFiuV1n6RNuMHQ0nz1mhgsSlZh93N5rArC/PUr3iViaT0cb82RjwxhaI
# RODBhhy7V9WxEhT9hR8sCP2ky2mrKgcYbjiIEw+IvFZOVQa58rMr2h/cbAb/iH4l
# 7T9Wba03JBqOS6qgzSFZOMxvqnYdVjhqXN8M6W9ngRJOjPEAkTB6Evwep6anRjcM
# mCUOgkf2sgQwKve8pYAeTMkzXFctvTc/qCU4ZbN8XcoKVVxe2jllGQqdOpMskPEf
# slOuINeW5M0K5gyjsb/huqcOTfDI2A==
# =/Y0+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Mar 2025 20:12:41 HKT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [full]
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
tap-linux: Open ipvtap and macvtap
Revert "hw/net/net_tx_pkt: Fix overrun in update_sctp_checksum()"
util/iov: Do not assert offset is in iov
net: move backend cleanup to NIC cleanup
net: parameterize the removing client from nc list
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- update and expand aarch64 GPU tests
- fix build dependence for plugins
- update libvirt-ci to vulkan-tools
- allow plugin tests to run on non-POSIX systems
- tweak test/vm times
- mark test-vma as linux only
- various compiler fixes for tcg tests
- add gitlab build unit tracker
- error out early on stalled RME tests
- compile core plugin code once
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmfOwjcACgkQ+9DbCVqe
KkRkcwgAlRTflCqYlZxdlo4CiOSXaHAFr8yfwWq138LJQRQH530JZnz1lZtxTbEM
pXT7ixnuJQDMybCQJmvUlK5UTUkZhGS3VuAR1VeM2J8/3VXYzf5sFjZ7yko9mA8S
2FX8vdfbko8/J31+lKccA0tpbHyi2AbMR+mO8xj6KZQoePwmHoRmhgH7p7LE35YO
8ytaOjMwTKF5fReVK+tlcrVJHFMdGsGNwtsnB2FhhVjI56fQqyM5hGXfOING2Fx3
iZH3rjzfDB4SWbBqaRsMgH9RXjuB9Eo4v0Qs5ve5SjDyzRJk+/CbbBJ4oRt9hurJ
bA+CYZuNLGBf8Z/mUeYMavA7rxT5rw==
=qobU
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-for-softfreeze-100325-3' of https://gitlab.com/stsquad/qemu into staging
functional and tcg tests, plugins and MAINTAINERS
- update and expand aarch64 GPU tests
- fix build dependence for plugins
- update libvirt-ci to vulkan-tools
- allow plugin tests to run on non-POSIX systems
- tweak test/vm times
- mark test-vma as linux only
- various compiler fixes for tcg tests
- add gitlab build unit tracker
- error out early on stalled RME tests
- compile core plugin code once
- update MAINTAINERS
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmfOwjcACgkQ+9DbCVqe
# KkRkcwgAlRTflCqYlZxdlo4CiOSXaHAFr8yfwWq138LJQRQH530JZnz1lZtxTbEM
# pXT7ixnuJQDMybCQJmvUlK5UTUkZhGS3VuAR1VeM2J8/3VXYzf5sFjZ7yko9mA8S
# 2FX8vdfbko8/J31+lKccA0tpbHyi2AbMR+mO8xj6KZQoePwmHoRmhgH7p7LE35YO
# 8ytaOjMwTKF5fReVK+tlcrVJHFMdGsGNwtsnB2FhhVjI56fQqyM5hGXfOING2Fx3
# iZH3rjzfDB4SWbBqaRsMgH9RXjuB9Eo4v0Qs5ve5SjDyzRJk+/CbbBJ4oRt9hurJ
# bA+CYZuNLGBf8Z/mUeYMavA7rxT5rw==
# =qobU
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Mar 2025 18:43:03 HKT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-for-softfreeze-100325-3' of https://gitlab.com/stsquad/qemu: (31 commits)
MAINTAINERS: remove widely sanctioned entities
plugins/core: make a single build unit
plugins/api: build only once
plugins/api: split out time control helpers
plugins/api: split out the vaddr/hwaddr helpers
plugins/api: split out binary path/start/end/entry code
plugins/loader: compile loader only once
plugins/plugin.h: include queue.h
plugins/api: clean-up the includes
include/qemu: plugin-memory.h doesn't need cpu-defs.h
plugins/loader: populate target_name with target_name()
plugins/api: use qemu_target_page_mask() to get value
tests/functional: add boot error detection for RME tests
gitlab: add a new build_unit job to track build size
tests/tcg: Suppress compiler false-positive warning on sha1.c
tests/tcg: enable -fwrapv for test-i386-bmi
tests/tcg: fix constraints in test-i386-adcox
tests/tcg: add message to _Static_assert in test-avx
tests/tcg: mark test-vma as a linux-only test
tests/vm: bump timeout for shutdown
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Address an error in RDMA-based migration by ensuring RDMA is prioritized
when saving pages in `ram_save_target_page()`.
Previously, the RDMA protocol's page-saving step was placed after other
protocols due to a refactoring in commit bc38dc2f5f. This led to migration
failures characterized by unknown control messages and state loading errors
destination:
(qemu) qemu-system-x86_64: Unknown control message QEMU FILE
qemu-system-x86_64: error while loading state section id 1(ram)
qemu-system-x86_64: load of migration failed: Operation not permitted
source:
(qemu) qemu-system-x86_64: RDMA is in an error state waiting migration to abort!
qemu-system-x86_64: failed to save SaveStateEntry with id(name): 1(ram): -1
qemu-system-x86_64: rdma migration: recv polling control error!
qemu-system-x86_64: warning: Early error. Sending error.
qemu-system-x86_64: warning: rdma migration: send polling control error
RDMA migration implemented its own protocol/method to send pages to
destination side, hand over to RDMA first to prevent pages being saved by
other protocol.
Fixes: bc38dc2f5f ("migration: refactor ram_save_target_page functions")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20250305062825.772629-2-lizhijian@fujitsu.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Unlike cpr-reboot mode, cpr-transfer mode cannot save volatile ram blocks
in the migration stream file and recreate them later, because the physical
memory for the blocks is pinned and registered for vfio. Add a blocker
for volatile ram blocks.
Also add a blocker for RAM_GUEST_MEMFD. Preserving guest_memfd may be
sufficient for CPR, but it has not been tested yet.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <1740667681-257312-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
On the incoming migration side, QEMU uses a coroutine to load all the VM
states. Inside, it may reference MigrationState on global states like
migration capabilities, parameters, error state, shared mutexes and more.
However there's nothing yet to make sure MigrationState won't get
destroyed (e.g. after migration_shutdown()). Meanwhile there's also no API
available to remove the incoming coroutine in migration_shutdown(),
avoiding it to access the freed elements.
There's a bug report showing this can happen and crash dest QEMU when
migration is cancelled on source.
When it happens, the dest main thread is trying to cleanup everything:
#0 qemu_aio_coroutine_enter
#1 aio_dispatch_handler
#2 aio_poll
#3 monitor_cleanup
#4 qemu_cleanup
#5 qemu_default_main
Then it found the migration incoming coroutine, schedule it (even after
migration_shutdown()), causing crash:
#0 __pthread_kill_implementation
#1 __pthread_kill_internal
#2 __GI_raise
#3 __GI_abort
#4 __assert_fail_base
#5 __assert_fail
#6 qemu_mutex_lock_impl
#7 qemu_lockable_mutex_lock
#8 qemu_lockable_lock
#9 qemu_lockable_auto_lock
#10 migrate_set_error
#11 process_incoming_migration_co
#12 coroutine_trampoline
To fix it, take a refcount after an incoming setup is properly done when
qmp_migrate_incoming() succeeded the 1st time. As it's during a QMP
handler which needs BQL, it means the main loop is still alive (without
going into cleanups, which also needs BQL).
Releasing the refcount now only until the incoming migration coroutine
finished or failed. Hence the refcount is valid for both (1) setup phase
of incoming ports, mostly IO watches (e.g. qio_channel_add_watch_full()),
and (2) the incoming coroutine itself (process_incoming_migration_co()).
Note that we can't unref in migration_incoming_state_destroy(), because
both qmp_xen_load_devices_state() and load_snapshot() will use it without
an incoming migration. Those hold BQL so they're not prone to this issue.
PS: I suspect nobody uses Xen's command at all, as it didn't register yank,
hence AFAIU the command should crash on master when trying to unregister
yank in migration_incoming_state_destroy().. but that's another story.
Also note that in some incoming failure cases we may not always unref the
MigrationState refcount, which is a trade-off to keep things simple. We
could make it accurate, but it can be an overkill. Some examples:
- Unlike most of the rest protocols, socket_start_incoming_migration()
may create net listener after incoming port setup sucessfully.
It means we can't unref in migration_channel_process_incoming() as a
generic path because socket protocol might keep using MigrationState.
- For either socket or file, multiple IO watches might be created, it
means logically each IO watch needs to take one refcount for
MigrationState so as to be 100% accurate on ownership of refcount taken.
In general, we at least need per-protocol handling to make it accurate,
which can be an overkill if we know incoming failed after all. Add a short
comment to explain that when taking the refcount in qmp_migrate_incoming().
Bugzilla: https://issues.redhat.com/browse/RHEL-69775
Tested-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250220132459.512610-1-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
On IOREQ_TYPE_INVALIDATE we need to invalidate the mapcache for regular
mappings. Since recently we started reusing the mapcache also to keep
track of grants mappings. However, there is no need to remove grant
mappings on IOREQ_TYPE_INVALIDATE requests, we shouldn't do that. So
remove the function call.
Fixes: 9ecdd4bf08 (xen: mapcache: Add support for grant mappings)
Cc: qemu-stable@nongnu.org
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250206194915.3357743-2-edgar.iglesias@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Block devices don't work in PV Grub (0.9x) if there is no mode specified. It
complains: "Error ENOENT when reading the mode"
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20250207143724.30792-2-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
In PVH dom0, when passthrough a device to domU, QEMU code
xen_pt_realize->xc_physdev_map_pirq wants to use gsi, but in current codes
the gsi number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different spaces, so
pirq mapping fails.
To solve above problem, use new interface of Xen, xc_pcidev_get_gsi to get
gsi and use xc_physdev_map_pirq_gsi to map pirq when dom0 is PVH.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Acked-by: Anthony PERARD <anthony@xenproject.org>
Reviewed-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Message-Id: <20241106061418.3655304-1-Jiqian.Chen@amd.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
The following organisations appear on the US sanctions list:
Yadro: https://sanctionssearch.ofac.treas.gov/Details.aspx?id=41125
ISPRAS: https://sanctionssearch.ofac.treas.gov/Details.aspx?id=50890
As a result maintainers interacting with such entities would face
legal risk in a number of jurisdictions. To reduce the risk of
inadvertent non-compliance remove entries from these organisations
from the MAINTAINERS file.
Mark the pcf8574 system as orphaned until someone volunteers to step
up as a maintainer. Add myself as a second reviewer to record/replay
so I can help with what odd fixes I can.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-32-alex.bennee@linaro.org>
Trim through the includes and remove everything not needed for the
core. Only include tcg-op-common.h to remove the need to
TARGET_LONG_BITS and move the build unit into the common set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-31-alex.bennee@linaro.org>
Now all the softmmu/user-mode stuff has been split out we can build
this compilation unit only once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-30-alex.bennee@linaro.org>
These are only usable in system mode where we control the timer. For
user-mode make them NOPs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-29-alex.bennee@linaro.org>
These only work for system-mode and are NOPs for user-mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-28-alex.bennee@linaro.org>
To move the main api.c to a single build compilation object we need to
start splitting out user and system specific code. As we need to grob
around host headers we move these particular helpers into the *-user
mode directories.
The binary/start/end/entry helpers are all NOPs for system mode.
While using the plugin-api.c.inc trick means we build for both
linux-user and bsd-user the BSD user-mode command line is still
missing -plugin. This can be enabled once we have reliable check-tcg
tests working for the BSDs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-27-alex.bennee@linaro.org>
There is very little in loader that is different between builds save
for a tiny user/system mode difference in the plugin_info structure.
Create two new files, user and system to hold mode specific helpers
and move loader into common_ss.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-26-alex.bennee@linaro.org>
Headers should bring in what they need so don't rely on getting
queue.h by side effects. This will help with clean-ups in the
following patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-25-alex.bennee@linaro.org>
Thanks to re-factoring and clean-up work (especially to exec-all) we
no longer need such broad headers for the api.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-24-alex.bennee@linaro.org>
hwaddr is a fixed size on all builds.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-23-alex.bennee@linaro.org>
We have a function we can call for this, lets not rely on macros that
stop us building once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-22-alex.bennee@linaro.org>
Requiring TARGET_PAGE_MASK to be defined gets in the way of building
this unit once. qemu_target_page_mask() will tell us what it is.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-21-alex.bennee@linaro.org>
It was identified that those tests randomly fail with a synchronous
exception at boot (reported by EDK2).
While we solve this problem, report failure immediately so tests don't
timeout in CI.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250303185745.2504842-1-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-20-alex.bennee@linaro.org>
We want to reduce the total number of build units in the system to get
on our way to a single binary. It will help to have some numbers so
lets add a job to gitlab to track our progress.
Cc: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-19-alex.bennee@linaro.org>
GCC versions at least 12 through 15 incorrectly report a warning
about code in sha1.c:
tests/tcg/multiarch/sha1.c:161:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
161 | SHA1Transform(context->state, &data[i]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a piece of stock library code for doing SHA1 which we've
simply copied, rather than writing ourselves. The bug has been
reported to upstream GCC (about a different library's use of this
code):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106709
For our test case, since this isn't our original code and there isn't
actually a bug in it, suppress the incorrect warning rather than
trying to modify the code to work around the compiler issue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2328
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250227141343.1675415-1-peter.maydell@linaro.org>
[AJB: -Wno-unknown-warning-option for clang's sake]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-18-alex.bennee@linaro.org>
We allow things like:
tests/tcg/i386/test-i386-bmi2.c:124:35: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
assert(result == (mask & ~(-1 << 30)));
in the main code, so allow it for the test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-17-alex.bennee@linaro.org>
In preparation for enabling clang and avoiding:
error: '_Static_assert' with no message is a C2x extension [-Werror,-Wc2x-extensions]
let us just add the message to silence the warning.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-15-alex.bennee@linaro.org>
The main multiarch tests should compile for any POSIX system, however
test-vma's usage of MAP_NORESERVE makes it a linux-only test. Simply
moving the source file is enough for the build logic to skip on BSD's.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-14-alex.bennee@linaro.org>
On my fairly beefy machine the timeout was triggering leaving a
corrupted disk image due to power being pulled before the disk had
synced. Triple the timeout to avoid this.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-13-alex.bennee@linaro.org>
The alpine baseline has also been updated in the meantime so we need
to address that while we are at it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-12-alex.bennee@linaro.org>
Not all platforms use the '.so' suffix for shared libraries,
which is how plugins are built. Use the recently introduced
dso_suffix() helper to get the proper host suffix.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2804
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250220080215.49165-4-philmd@linaro.org>
[AJB: moved plugin_file into testcase.py]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-11-alex.bennee@linaro.org>
Introduce a helper to get the default shared library
suffix used on the host.
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250220080215.49165-3-philmd@linaro.org>
[AJB: dropped whitespace cmd.py damage]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-10-alex.bennee@linaro.org>
./tests/functional/test_aarch64_tcg_plugins.py needs to have plugin
libinsn built. However, it's not listed as a dependency, so meson can't
know it needs to be built.
Thus, we keep track of all plugins, and add them as an explicit
dependency.
Fixes: 4c134d07b9 ("tests: add a new set of tests to exercise plugins")
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-9-alex.bennee@linaro.org>
Update to the most recent aarch64_virt_gpu image. The principle
differences are:
- target a v8.0 baseline CPU
- latest vkmark (2025.1)
- actually uses the rootfs (previously was initrd)
- rootfs includes more testing tools for interactive use
See README.md in https://fileserver.linaro.org/s/ce5jXBFinPxtEdx for
details about the image creation and the buildroot config.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-8-alex.bennee@linaro.org>
