WRMSRNS doesn't become a required feature for FERD, and Linux has
removed the dependency, as such remove it from Qemu.
Cc: qemu-stable@nongnu.org
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250103084827.1820007-2-xin@zytor.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0b901459a8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
AUD_open_out() may fail and return NULL. This may then lead to
a segmentation fault in memset() below. The memset() behaviour
is undefined if the pointer to the destination object is a null
pointer.
Add the missing error handling code.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20250515054429.7385-4-vr_qemu@t-online.de>
(cherry picked from commit d009f26a54)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The buffer size calculated by AUD_get_buffer_size_out() is often
incorrect. sw->hw->samples * sw->hw->info.bytes_per_frame is the
size of the mixing engine buffer in audio frames multiplied by
the size of one frame of the audio backend. Due to resampling or
format conversion, the size of the frontend buffer can differ
significantly.
Return the correct buffer size when the mixing engine is used.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20250515054429.7385-3-vr_qemu@t-online.de>
(cherry picked from commit ccb4fec0e5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As far as the emulated audio devices are concerned the pointer
returned by AUD_open_out() is an opaque handle. This includes
the NULL pointer. In this case, AUD_get_buffer_size_out() should
return a sensible buffer size instead of triggering a segmentation
fault. All other public AUD_*_out() and audio_*_out() functions
handle this case.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20250515054429.7385-2-vr_qemu@t-online.de>
(cherry picked from commit 5ddd6c8dc8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If vCPUs > 255 then x86 common code (x86_cpus_init()) call kvm_enable_x2apic().
But if vCPUs <= 255 then the common code won't calls kvm_enable_x2apic().
This is because commit 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM
checks on XTSup feature") removed the call to kvm_enable_x2apic when xtsup
is "on", which break things when guest is booted with x2apic mode and
there are <= 255 vCPUs.
Fix this by adding back kvm_enable_x2apic() call when xtsup=on.
Fixes: 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM checks on XTSup feature")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Message-Id: <20250516100535.4980-3-sarunkod@amd.com>
Fixes: 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM checks on XTSup feature")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
(cherry picked from commit 0f178860df)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c1f46999ef ("amd_iommu: Add support for pass though mode")
introduces the support for "pt" flag by enabling nodma memory when
"pt=off". This allowed VFIO devices to successfully register notifiers
by using nodma region.
But, This also broke things when guest is booted with the iommu=nopt
because, devices bypass the IOMMU and use untranslated addresses (IOVA) to
perform DMA reads/writes to the nodma memory region, ultimately resulting in
a failure to setup the devices in the guest.
Fix the above issue by always enabling the amdvi_dev_as->iommu memory region.
But this will once again cause VFIO devices to fail while registering the
notifiers with AMD IOMMU memory region.
Fixes: c1f46999ef ("amd_iommu: Add support for pass though mode")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250516100535.4980-2-sarunkod@amd.com>
Fixes: c1f46999ef ("amd_iommu: Add support for pass though mode")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
(cherry picked from commit 31753d5a33)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 56b1f50e3c ("hw/i386/pc: Wire RTC ISA IRQs in south bridges")
attempted to refactor RTC IRQ wiring which was previously done in
pc_basic_device_init() but forgot about the isapc machine. Fix this by
wiring in the code section dedicated exclusively to the isapc machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2961
Fixes: 56b1f50e3c ("hw/i386/pc: Wire RTC ISA IRQs in south bridges")
cc: qemu-stable
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Message-Id: <20250526203820.1853-1-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0b006153b7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The vring call fd is set even when the guest does not use MSI-X (e.g., in the
case of virtio PMD), leading to unnecessary CPU overhead for processing
interrupts.
The commit 96a3d98d2c("vhost: don't set vring call if no vector") optimized the
case where MSI-X is enabled but the queue vector is unset. However, there's an
additional case where the guest uses INTx and the INTx_DISABLED bit in the PCI
config is set, meaning that no interrupt notifier will actually be used.
In such cases, the vring call fd should also be cleared to avoid redundant
interrupt handling.
Fixes: 96a3d98d2c("vhost: don't set vring call if no vector")
Reported-by: Zhiyuan Yuan <yuanzhiyuan@chinatelecom.cn>
Signed-off-by: Jidong Xia <xiajd@chinatelecom.cn>
Signed-off-by: Huaitong Han <hanht2@chinatelecom.cn>
Message-Id: <20250522100548.212740-1-hanht2@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a9403bfcd9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When sending a tight rectangle with the palette filter, if the client
format was 8/16bpp, the colours on big endian hosts are not set as
we're sending the wrong bytes. We must first cast the 32-bit colour
to a 16/8-bit value, and then send the result.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 63d3209092)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The set_pixel_conversion() method is responsible for determining whether
the VNC client pixel format matches the server format, and thus whether
we can use the fast path "copy" impl for sending pixels, or must use
the generic impl with bit swizzling.
The VNC server format is set at build time to VNC_SERVER_FB_FORMAT,
which corresponds to PIXMAN_x8r8g8b8.
The qemu_pixman_get_format() method is then responsible for converting
the VNC pixel format into a pixman format.
The VNC client pixel shifts are relative to the associated endianness.
The pixman formats are always relative to the host native endianness.
The qemu_pixman_get_format() method does not take into account the
VNC client endianness, and is thus returning a pixman format that is
only valid with the host endianness matches that of the VNC client.
This has been broken since pixman was introduced to the VNC server:
commit 9f64916da2
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed Oct 10 13:29:43 2012 +0200
pixman/vnc: use pixman images in vnc.
The flaw can be demonstrated using the Tigervnc client by using
vncviewer -AutoSelect=0 -PreferredEncoding=raw server:display
connecting from a LE client to a QEMU on a BE server, or the
reverse.
The bug was masked, however, because almost all VNC clients will
advertize support for the "tight" encoding and the QEMU VNC server
will prefer "tight" if advertized.
The tight_pack24 method is responsible for taking a set of pixels
which have already been converted into client endianness and then
repacking them into the TPIXEL format which the RFB spec defines
as
"TPIXEL is only 3 bytes long, where the first byte is the
red component, the second byte is the green component,
and the third byte is the blue component of the pixel
color value"
IOW, the TPIXEL format is fixed on the wire, regardless of what
the VNC client declare as its endianness.
Since the VNC pixel encoding code was failing to honour the endian
flag of the client, the tight_pack24 method was always operating
on data in native endianness. Its impl cancelled out the VNC pixel
encoding bug.
With the VNC pixel encoding code now fixed, the tight_pack24 method
needs to take into account that it is operating on data in client
endianness, not native endianness. It thus may need to invert the
pixel shifts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 7009744285)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It will make it easier to do certain comparisons in future if we
store G_BIG_ENDIAN/G_LITTLE_ENDIAN directly, instead of a boolean
flag, as we can then compare directly to the G_BYTE_ORDER constant.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 7ed96710e8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When using sdl display backend, if the window is scaled, incorrect mouse
positions will be reported since scaling is not properly handled. Fix it
by transforming the positions from window coordinate to guest buffer
coordinate.
Signed-off-by: Weifeng Liu <weifeng.liu@intel.com>
Message-ID: <20250511073337.876650-6-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 30aa105640)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When gl=on, scale_x and scale_y were set to 1 on startup that didn't
reflect the real situation of the scan-out in free scale mode, resulting
in incorrect cursor coordinates to be sent when moving the mouse
pointer. Simply updating the scales before rendering the image fixes
this issue.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-5-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 8fb072472c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The code snippet updating scale_x/scale_y is general and will be used in
next patch. Make it a function.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-4-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit a196654481)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now that we've documented definitions and presentation of various
coordinates, let's enforce the rules.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-3-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 3a6b314409)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The existence of multiple scaling factors forces us to deal with various
coordinate systems and this would be confusing. It would be beneficial
to define the concepts clearly and use consistent representation for
variables in different coordinates.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Message-ID: <20250511073337.876650-2-weifeng.liu.z@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(cherry picked from commit 9498e2f7e1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On big-endian hosts, the aspeed_ram_capacity_write() function previously passed
the address of a 64-bit "data" variable directly to address_space_write(),
assuming host and guest endianness matched.
However, the data is expected to be written in little-endian format to DRAM.
On big-endian hosts, this led to incorrect data being written into DRAM,
which caused the guest firmware to misdetect the DRAM size.
As a result, U-Boot fails to boot and hangs.
- Replaces the "address_space_write()" call with "address_space_stl_le()",
which performs an explicit 32-bit little-endian write.
- Updating the MemoryRegionOps to restrict access to exactly 4 bytes
using .valid.{min,max}_access_size = 4 and .impl.min_access_size = 4.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: 7436db1 ("aspeed/soc: fix incorrect dram size for AST2700")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250522023305.2486536-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit e6941ac106)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, if the program encounters an unsupported algorithm, it does not set
the HASH_IRQ bit in the status register and send an interrupt to indicate
command completion. As a result, the FW gets stuck waiting for a completion
signal from the HACE module.
Additionally, in do_hash_operation, if an error occurs within the conditional
statement, the HASH_IRQ bit is not set in the status register. This causes the
firmware to continuously send HASH commands, as it is unaware that the HACE
model has completed processing the command.
To fix this, the HASH_IRQ bit in the status register must always be set to
ensure that the firmware receives an interrupt from the HACE module, preventing
it from getting stuck or repeatedly sending HASH commands.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: c5475b3 ("hw: Model ASPEED's Hash and Crypto Engine")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit fb8e59abbe)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 3d5b2f81fb.
It should not be in 10.0.x branch, since we do support python 3.8
in 10.0.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Python 3.8 went "end of life" in October 2024 and Fedora 42 dropped
this version already, so the "python" CI job is currently failing.
Thus it's time to drop support for this Python version in QEMU, too.
While we're at it, also look for "python3.13" in the configure script.
Message-ID: <20250425120710.879518-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit d64db833d6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Implement FP exception register #1 (lower 32-bits of 64-bit fr[0]).
A proper implementation is necessary to allow the Linux kernel in
system mode and the qemu linux-user to send proper si_code values
on SIGFPE signal.
Always set the T-bit on taken exception, and merge over- and underflow
in system mode to just set overflow bit to mimic the behaviour I tested
on a physical machine.
The test program below can be used to verify correct behaviour. Note
that behaviour on SIGFPE may vary on different platforms. The program
should always detect the correct signal, but it may or may not be able
to sucessfully continue afterwards.
#define _GNU_SOURCE
#include <signal.h>
#include <stdio.h>
#include <fenv.h>
#include <float.h>
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main(int argc, char *argv[]) {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW | FE_UNDERFLOW);
double x = DBL_MIN;
return printf("%lf\n", argc > 1
? 1.7976931348623158E308*1.7976931348623158E308
: x / 10);
}
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit ebd394948d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Improve the linux-user emulation to send the correct si_code depending
on overflow (TARGET_FPE_FLTOVF), underflow (TARGET_FPE_FLTUND), ...
Note that the hardware stores the relevant flags in FP exception
register #1, which is actually the lower 32-bits of the 64-bit fr[0]
register in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit b4b49cf39d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The hardware stores the instruction code in the lower bits of the FP
exception register #1 on FP assist traps.
This fixes the FP exception handler on Linux, as the Linux kernel uses
the value to decide on the correct signal which should be pushed into
userspace (see decode_fpu() in Linux kernel).
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 923976dfe3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With commit 82137e6c8c ("migration: enforce multifd and postcopy preempt to
be set before incoming"), and if postcopy preempt / multifd is enabled, one
cannot setup any capability because these checks would always fail.
(qemu) migrate_set_capability xbzrle off
Error: Postcopy preempt must be set before incoming starts
To fix it, check existing cap and only raise an error if the specific cap
changed.
Fixes: 82137e6c8c ("migration: enforce multifd and postcopy preempt to be set before incoming")
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 17bec9235b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If zerocopy is enabled for multifd then QIO_CHANNEL_WRITE_FLAG_ZERO_COPY
flag is forced into all multifd channel write calls via p->write_flags
that was setup in multifd_nocomp_send_setup().
However, device state packets aren't compatible with zerocopy - the data
buffer isn't getting kept pinned until multifd channel flush.
Make sure to mask that QIO_CHANNEL_WRITE_FLAG_ZERO_COPY flag in a multifd
send thread if the data being sent is device state.
Fixes: 0525b91a0b ("migration/multifd: Device state transfer support - send side")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/3bd5f48578e29f3a78f41b1e4fbea3d4b2d9b136.1747403393.git.maciej.szmigiero@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 6be7696129)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There're 2 QMP commands: query-sgx and query-sgx-capabilities, but
their outputs are very similar and the documentation lacks clear
differentiation.
From the codes, query-sgx is used to gather guest's SGX capabilities
(including SGX related CPUIDs and EPC sections' size, in SGXInfo), and
if guest doesn't have SGX, then QEMU will report the error message.
On the other hand, query-sgx-capabilities is used to gather host's SGX
capabilities (descripted by SGXInfo as well). And if host doesn't
support SGX, then QEMU will also report the error message.
Considering that SGXInfo is already documented and both these 2 commands
have enough error messages (for the exception case in their codes).
Therefore the QAPI documentation for these two commands only needs to
emphasize that one of them applies to the guest and the other to the
host.
Fix their documentation to reflect this difference.
Reported-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20250513143131.2008078-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7f2131c35c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pci_host_data_be_ops became unused after endianness fixes
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rakesh Jeyasingh <rakeshjb010@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250429170354.150581-3-rakeshjb010@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 560375cff3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The GT-64120 PCI controller requires special handling where:
1. Host bridge(bus 0 ,device 0) must never be byte-swapped
2. Other devices follow MByteSwap bit in GT_PCI0_CMD
The previous implementation incorrectly swapped all accesses, breaking
host bridge detection (lspci -d 11ab:4620).
Changes made:
1. Removed gt64120_update_pci_cfgdata_mapping() and moved data_mem initialization
to gt64120_realize() for cleaner setup
2. Implemented custom read/write handlers that:
- Preserve host bridge accesses (extract32(config_reg,11,13)==0)
- apply swapping only for non-bridge devices in big-endian mode
Fixes: 145e2198 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2826
Signed-off-by: Rakesh Jeyasingh <rakeshjb010@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250429170354.150581-2-rakeshjb010@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e5894fd6f4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since Commit c6bd2dd634 ("i386/cpu: Set up CPUID_HT in
x86_cpu_expand_features() instead of cpu_x86_cpuid()"), CPUID_HT will be
set in env->features[] in x86_cpu_expand_features() when vcpus >= 2.
Later in x86_cpu_filter_features() it will check against the HVF
supported bits. It will trigger the warning like
qemu-system-x86_64: warning: host doesn't support requested feature: CPUID.01H:EDX.ht [bit 28]
Add CPUID_HT to HVF supported CPUID bits to fix it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250514031652.838763-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7a48612306)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit c6bd2dd634 ("i386/cpu: Set up CPUID_HT in
x86_cpu_expand_features() instead of cpu_x86_cpuid()") and
commit 99a637a86f ("i386/cpu: Set and track CPUID_EXT3_CMP_LEG in
env->features[FEAT_8000_0001_ECX]"), it gets warnings when booting the
VM with vcpus >= 2 and with tcg:
qemu-system-x86_64: warning: TCG doesn't support requested feature: CPUID.01H:EDX.ht [bit 28]
qemu-system-x86_64: warning: TCG doesn't support requested feature: CPUID.80000001H:ECX.cmp-legacy [bit 1]
This is because, after the two commits, CPUID_HT and CPUID_EXT3_CMP_LEG
are set in env->features[] when vcpus >=2 (in x86_cpu_expand_features())
later in x86_cpu_filter_features() it will check against the TCG supported
bits. However, current TCG doesn't mark the two bits as supported, hence
the warnings.
Fix it by adding the two bits to the supported bits of TCG since multiple
vcpus are supported by TCG.
Fixes: c6bd2dd634 ("i386/cpu: Set up CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()")
Fixes: 99a637a86f ("i386/cpu: Set and track CPUID_EXT3_CMP_LEG in env->features[FEAT_8000_0001_ECX]")
Reported-by: Ewan Hai <ewanhai-oc@zhaoxin.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250514031652.838763-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5979f50fa9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[1] reports that commit 4db19d5b21 broke a KVM guest running kernel 6.6.
This happens because the kernel does not know 'senvcfg', making it
unable to boot because QEMU is reading/wriiting it without any checks.
After converting the CSRs to do "automated" get/put reg procedures in
the previous patch we can now scan for availability. Two functions are
created:
- kvm_riscv_read_csr_cfg_legacy() will check if the CSR exists by brute
forcing KVM_GET_ONE_REG in each one of them, interpreting an EINVAL
return as indication that the CSR isn't available. This will be use in
absence of KVM_GET_REG_LIST;
- kvm_riscv_read_csr_cfg() will use the existing result of get_reg_list
to check if the CSRs ids are present.
kvm_riscv_init_multiext_cfg() is now kvm_riscv_init_cfg() to reflect that
the function is also dealing with CSRs.
[1] https://lore.kernel.org/qemu-riscv/CABJz62OfUDHYkQ0T3rGHStQprf1c7_E0qBLbLKhfv=+jb0SYAw@mail.gmail.com/
Fixes: 4db19d5b21 ("target/riscv/kvm: add missing KVM CSRs")
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit f396c217a5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
At this moment we're not checking if the host has support for any
specific CSR before doing get/put regs. This will cause problems if the
host KVM doesn't support it (see [1] as an example).
We'll use the same approach done with the CPU extensions: read all known
KVM CSRs during init() to check for availability, then read/write them
if they are present. This will be made by either using get-reglist or by
directly reading the CSRs.
For now we'll just convert the CSRs to use a kvm_csr_cfg[] array,
reusing the same KVMCPUConfig abstraction we use for extensions, and use
the array in (get|put)_csr_regs() instead of manually listing them. A
lot of boilerplate will be added but at least we'll automate the get/put
procedure for CSRs, i.e. adding a new CSR in the future will be a matter
of adding it in kvm_csr_regs[] and everything else will be taken care
of.
Despite all the code changes no behavioral change is made.
[1] https://lore.kernel.org/qemu-riscv/CABJz62OfUDHYkQ0T3rGHStQprf1c7_E0qBLbLKhfv=+jb0SYAw@mail.gmail.com/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit d3b6f1742c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need the reg_id_ulong() helper to be a macro to be able to create a
static array of KVMCPUConfig that will hold CSR information.
Despite the amount of changes all of them are tedious/trivial:
- replace instances of "kvm_riscv_reg_id_ulong" with
"KVM_RISCV_REG_ID_ULONG";
- RISCV_CORE_REG(), RISCV_CSR_REG(), RISCV_CONFIG_REG() and
RISCV_VECTOR_CSR_REG() only receives one 'name' arg. Remove unneeded
'env' variables when applicable.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 11766e1761)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This change is motivated by a future change w.r.t CSRs management. We
want to handle them the same way as KVM extensions, i.e. a static array
with KVMCPUConfig objs that will be read/write during init and so on.
But to do that properly we must be able to declare a static array that
hold KVM regs.
C does not allow to init static arrays and use functions as
initializers, e.g. we can't do:
.kvm_reg_id = kvm_riscv_reg_id_ulong(...)
When instantiating the array. We can do that with macros though, so our
goal is turn kvm_riscv_reg_ulong() in a macro. It is cleaner to turn
every other reg_id_*() function in macros, and ulong will end up using
the macros for u32 and u64, so we'll start with them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b609610349)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'reglist' is being g-malloc'ed but never freed.
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 906af6de94)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove an unused 'KVMScratchCPU' pointer argument in
kvm_riscv_check_sbi_dbcn_support().
Put kvm_riscv_reset_regs_csr() after kvm_riscv_put_regs_csr(). This will
make a future patch diff easier to read, when changes in
kvm_riscv_reset_regs_csr() and kvm_riscv_get_regs_csr() will be made.
Fixes: a6b53378f5 ("target/riscv/kvm: implement SBI debug console (DBCN) calls")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 73f81da0a3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vslidedown always zeroes elements past vl, where it should use the
tail policy.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250414213006.3509058-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 2669b696e2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the v spec, the encodings of vcomoress.vm and vector
mask-register logical instructions with vm=0 are reserved.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 8539a1244b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit db21c3eb05)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
The vd of vector widening mul-add instructions is one of the input
operands.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 1f090a229f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 411eefd56a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b5480a693e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit fda68acb77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit fbeaf35838)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the v spec, a vector register cannot be used to provide source
operands with more than one EEW for a single instruction.
The vs1 EEW of vrgatherei16.vv is 16.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 629c2a8dd7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b0450a101d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add the relevant ISA paragraphs explaining why source (and destination)
registers cannot overlap the mask register.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 3e8d1e4a62)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
