Move the remaining tests into a misc-tests.c file. These tests are
mostly about validation of input and should be in the future replaced
by unit testing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This test is already starting to bitrot, so first remove it from ifdef
and fix compile issues. ppc64 transfers about 2MB, so bump the size
threshold too.
It was said to be broken on aarch64 but it may have been due to the
limited shm size under Gitlab CI.
Cc: Yury Kotov <yury-kotov@yandex-team.ru>
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
[put it under flaky tests, we still don't have a solution for the CI]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the mode/reboot test into a separate file to hold all the CPR
tests. Currently there's just one test, but we're adding more CPR
modes and the feature is different enough from live migration that
it's worth it to have a separate file for it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the precopy tests from migration-test.c. This is the largest
group of tests and the more difficult one to break into smaller
groups, so move all of it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the file tests from migration-test.c. These are being moved to
their own file due to being special enough compared with the regular
stream migration. There is also the entire mapped-ram feature which
depends on file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Split the next group of tests from migration-test.c, the postcopy
tests. This is another well-defined group of tests and postcopy is a
unique enough feature that it deserves it's own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Continuing the split of groups of tests from migration-test.c, split
the compression tests into their own file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration-test.c file has become unwieldy large. It's quite
confusing to navigate with all the test definitions mixed with hook
definitions. The TLS tests make this worse with ifdef'ery.
Since we're planning on having a smaller set of tests to run as smoke
testing on all architectures, I'm taking the time to split some tests
into their own file.
Move the TLS tests into a file of their own.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The migration tests have a set of core infrastructure routines. These
are functions that are called by (almost) all tests and centralize the
common operations of: starting migration on both sides, waiting for
guests to boot, performing guest initialization and teardown, guest
memory validation, etc.
Move this basic framework code (and a few static helpers) into a
separate file. Leave only individual test functions (and their own
static helpers) in migration-test.c.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We currently have some environment validation to perform and flags to
set during the initialization of the tests. To be able to add more
migration test binaries, we'll need these tasks to be in their own
function so they can be called from more than one place.
Move the initialization code to a function and introduce the
MigrationTestEnv structure to hold the flags that are accessed during
test registration.
Make the env object static to avoid have to change all the code to
pass it around. Similarly with the tmpfs variable, which is used
extensively.
Note: I'm keeping the new functions in migration-test.c because they
are going to be moved in the next patch to the correct place.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move kvm_dirty_ring_supported() to migration-util.c. Similarly to
ufd_version_check(), this function is used during test definition so
put it in the utils file.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move ufd_version_check() to migration-util.c file. This is a helper
function that is used during tests definition so it should be
available outside of migration-test.c
Since the function is moving to another file, change it to stop
accessing the global uffd_feature_thread_id and take it as argument
instead.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Rename migration-helpers.c to migration-util.c to make its purpose
more explicit and avoid the "helper" terminology.
Move the file to the qtest/migration/ directory along with the rest of
the migration files.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We current have a bunch of non-test functions in migration-test.c and
some others in migration-helpers.c. In order to split migration-test.c
into separate test binaries, these helpers need to go somewhere
else.
To avoid making migration-helpers even larger, move all QMP-related
functions into a new migration-qmp.c file and put it under the
qtest/migration/ directory.
The new file holds everything that has as its main responsibility to
call into QMP.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move the code that creates the guest binary out of migration-test and
into the qtest/migration/ directory, along with the rest of the
a-b-kernel code.
That code is part of the basic infrastructure of migration tests, it
shouldn't be among the tests themselves.
Also take the chance and rename migration-test.h, which is too generic
a name for this header which contains only values related to guest
memory offsets.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The current build structure for migration tests is confusing. There is
the tests/migration directory, which contains two different guest code
implementations, one for the qtests (a-b-{bootblock|kernel}.S) and
another for the guestperf script (stress.c). One uses a Makefile,
while the other uses meson.
The next patches will add a new qtests/migration/ directory to hold
qtest code which will make the situation even more confusing.
Move the guest code used by qtests into a new qtests/migration/
directory and rename the old one to tests/migration-stress.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Test frameworks usually prefix "test_" to the entry point of the test
code. Having every function prefixed with test_ makes it hard to
understand the code and to grep for the actual tests.
Remove the "test" prefix from everything that is not a test.
In order to still keep some namespacing, stick to the "migrate_"
prefix, which is the most used currently.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Standardize the hook names:
- change the names to .start|end_hook to match
test_migrate_start|end()
- use the migrate_hook_start_ and migrate_hook_end_ prefixes
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In the device and drive plug/unplug tests we want to trigger
a system reset and then see if we get the appropriate
DEVICE_DELETED event. Use qtest_system_reset_nowait() here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Use the qtest_system_reset() function in various tests that were
previously open-coding the system-reset. Note that in several
cases this fixes a bug where the test did not wait for the RESET
QMP event before continuing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We have several qtest tests which want to reset the QEMU under test
during the course of testing something. They currently generally
have their own functions to do this, which work by sending a
"system_reset" QMP command. However, "system_reset" only requests a
reset, and many of the tests which send the QMP command forget the
"and then wait for the QMP RESET event" part which is needed to
ensure that the reset has completed.
Provide a qtest_system_reset() function in libqtest so that
we don't need to reimplement this in multiple different tests.
A few tests (for example device hotplug related tests) want to
perform the reset command and then wait for some other event that is
produced during the reset sequence. For them we provide
qtest_system_reset_nowait() so they can clearly indicate that they
are deliberately not waiting for the RESET event.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Some tests need more time when qemu is built with
"--enable-asan --enable-ubsan"
As was discussed here:
https://patchew.org/QEMU/20241112120100.176492-2-frolov@swemel.ru/
TIMEOUT_MULTIPLIER enviroment variable will be
a useful option, allowing non-invasive timeouts
increasing for a specific build.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Tested-by: Fabiano Rosas <farosas@suse.de>
[changed from ifndef to ?=]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
* Removed tacoma-bmc machine
* Added support for SDHCI on AST2700 SoC
* Improved functional tests
* Extended SMC qtest to all Aspeed SoCs
-----BEGIN PGP SIGNATURE-----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=BiCq
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241211' of https://github.com/legoater/qemu into staging
aspeed queue:
* Removed tacoma-bmc machine
* Added support for SDHCI on AST2700 SoC
* Improved functional tests
* Extended SMC qtest to all Aspeed SoCs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmdZMTQACgkQUaNDx8/7
# 7KE9dhAAw9xNULQ7KG9udSNqYPRGP2w8teO4b9YOfRlJlSJuCInbeLjg1Hw3b/bZ
# rEtnwjl18f+mpmHzvasQthN4vUtcR1UwrW6SvmAjAQV8iNw059ugxWdxV9VR72hc
# 1AlzsW/Hea8s448INTEUvEjosYeLRRxZQyiJt9Lf5IkU/6yLj98YssKKvRqPpkxP
# Ens7PapgGPqA7cPnPYofRn2WINtHNnvX2FGlWTnCoPVp85VJzjJVFcK14kBych2U
# fmNZAY7pPTBkwwqR/qoPOyqBBCLeu3Jimk7hR8VbBbfwMT/Zg3RO7TJfwJex9TEs
# PIViRuM8krEppL6fmJlpDTatU2t0ffQY1SSVRWCDxJDDRpQN7iDei3vuzXOfLVAe
# lLSXS5Q1f+sO6JzbqkYSufh5V7zR5De8rk4j5WszC3cko2godTZm3qyqUxEaQGcx
# kjG58R+a7qLLeNMcPed5qgGjYeCPmhHay80E3faXKOezktSIM5z5b822ZPZfw3oG
# gTddZ4hdTg0BxtEjSv19qqnJW0Hs+NZJQuyu34QS82dZqPeZ22dmfULtf9uQ/3oV
# A/jKfTncl3sW1otfLABj6/RPVH/Sr7IM70XBjlc1+p9Ci7Es17er8umFOAyek9WL
# pE/Lq23MnAPBUsPKOJRdDFClTGwdnemXJoymwY/NZS4SgV3GcD8=
# =BiCq
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Dec 2024 06:29:08 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241211' of https://github.com/legoater/qemu: (24 commits)
test/qtest/ast2700-smc-test: Support to test AST2700
test/qtest: Introduce a new aspeed-smc-utils.c to place common testcases
test/qtest/aspeed_smc-test: Support write page command with QPI mode
test/qtest/aspeed_smc-test: Support to test AST1030
test/qtest/aspeed_smc-test: Support to test AST2600
test/qtest/aspeed_smc-test: Support to test AST2500
test/qtest/aspeed_smc-test: Introducing a "page_addr" data field
test/qtest/aspeed_smc-test: Support to test all CE pins
test/qtest/aspeed_smc-test: Introduce a new TestData to test different BMC SOCs
test/qtest/aspeed_smc-test: Move testcases to test_palmetto_bmc function
tests/functional: Move debian boot test from avocado
tests/functional: Introduce a specific test for rainier-bmc machine
tests/functional: Introduce a specific test for ast2600 SoC
tests/functional: Introduce a specific test for ast2500 SoC
tests/functional: Introduce a specific test for romulus-bmc machine
tests/functional: Introduce a specific test for palmetto-bmc machine
tests/functional: Introduce a specific test for ast1030 SoC
aspeed/soc: Support eMMC for AST2700
aspeed/soc: Support SDHCI for AST2700
hw/sd/aspeed_sdhci: Add AST2700 Support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add test_ast2700_evb function and reused testcases which are from
aspeed_smc-test.c for AST2700 testing. The base address, flash base address
and ce index of fmc_cs0 are 0x14000000, 0x100000000 and 0, respectively.
The default flash model of fmc_cs0 is "w25q01jvq" whose size is 128MB,
so set jedec_id 0xef4021.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The testcases for ASPEED SMC model were placed in aspeed_smc-test.c.
However, this test file only supports for ARM32. To support all ASPEED SOCs
such as AST2700 whose CPU architecture is aarch64, introduces a new
aspeed-smc-utils source file and move all common APIs and testcases
from aspeed_smc-test.c to aspeed-smc-utils.c.
Finally, users are able to re-used these testcase for AST2700 and future
ASPEED SOCs testing.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a new testcase for write page command with QPI mode testing.
Currently, only run this testcase for AST2500, AST2600 and AST1030.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add test_ast1030_evb function and reused testcases for AST1030 testing.
The base address, flash base address and ce index of fmc_cs0 are
0x7E620000, 0x80000000 and 0, respectively.
The default flash model of fmc_cs0 is "w25q80bl" whose size is 1MB,
so set jedec_id 0xef4014.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add test_ast2600_evb function and reused testcases for AST2600 testing.
The spi base address, flash base address and ce index of fmc_cs0 are
0x1E620000, 0x20000000 and 0, respectively.
The default flash model of fmc_cs0 is "mx66u51235f" whose size is 64MB,
so set jedec_id 0xc2253a.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add test_ast2500_evb function and reused testcases for AST2500 testing.
The spi base address, flash base address and ce index of fmc_cs0 are
0x1E620000, 0x20000000 and 0, respectively.
The default flash model of fmc_cs0 is "mx25l25635e" whose size is 32MB,
so set jedec_id 0xc22019.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, these test cases used the hardcode offset 0x1400000 (0x14000 * 256)
which was beyond the 16MB flash size for flash page read/write command testing.
However, the default fmc flash model of ast1030-a1 EVB is "w25q80bl" whose size
is 1MB. To test SoC flash models, introduces a new page_addr member in TestData
structure, so users can set the offset for flash page read/write command
testing.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, these test cases only support to test CE0. To test all CE pins,
introduces new ce and node members in TestData structure. The ce member is used
for saving the ce index and node member is used for saving the node path,
respectively.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, these test cases are only used for testing fmc_cs0 for AST2400.
To test others BMC SOCs, introduces a new TestData structure.
Users can set the spi base address, flash base address, jedesc id and so on
for different BMC SOCs and flash model testing.
Introduce new helper functions to make the test case more readable.
Set spi base address 0x1E620000, flash_base address 0x20000000
and jedec id 0x20ba19 for fmc_cs0 with n25q256a flash for AST2400
SMC model testing.
To pass the TestData into the test case, replace qtest_add_func with
qtest_add_data_func.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
So far, the test cases are used for testing SMC model with AST2400 BMC.
However, AST2400 is end off live and ASPEED is no longer support this SOC.
To test SMC model for AST2500, AST2600 and AST1030, move the test cases
from main to test_palmetto_bmc function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241127091543.1243114-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This simply moves the debian boot test from the avocado testsuite to
the new functional testsuite. No changes in the test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-8-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This simply moves the rainier-bmc test to a new test file. No changes
in the test. The test_arm_aspeed.py is deleted.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-7-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This moves the ast2600-evb tests to a new test file. No changes in the
test. The routines used to run the buildroot and sdk tests are removed
from the test_arm_aspeed.py file because now unused.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-6-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This moves the ast2500-evb tests to a new test file and extends the
aspeed module with routines used to run the buildroot and sdk
tests. No changes in the test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-5-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This simply moves the romulus-bmc test to a new test file. No changes
in the test. The do_test_arm_aspeed routine is removed from the
test_arm_aspeed.py file because it is now unused.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-4-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This introduces a new aspeed module for sharing code between tests and
moves the palmetto test to a new test file. No changes in the test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20241206131132.520911-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add SDHCI model for AST2700 eMMC support. The eMMC controller only support 1
slot and registers base address is start at 0x1209_0000 and its interrupt is
connected to GICINT 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241204084453.610660-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add SDHCI model for AST2700 SDHCI support. The SDHCI controller only support 1
slot and registers base address is start at 0x1408_0000 and its interrupt is
connected to GICINT133_INTC at bit 1.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241204084453.610660-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
init function and set the value of capability register to "0x0000000719f80080".
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241204084453.610660-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, it set the hardcode value of capability registers to all ASPEED SOCs
However, the value of capability registers should be different for all ASPEED
SOCs. For example: the bit 28 of the Capability Register 1 should be 1 for
64-bits System Bus support for AST2700.
Introduce a new "capareg" class member whose data type is uint_64 to set the
different Capability Registers to all ASPEED SOCs.
The value of Capability Register is "0x0000000001e80080" for AST2400 and
AST2500. The value of Capability Register is "0x0000000701f80080" for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20241204084453.610660-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Removal was scheduled for 10.0. Use the rainier-bmc machine or the
ast2600-evb as a replacement.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241119071352.515790-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
