This change is motivated by a future change w.r.t CSRs management. We
want to handle them the same way as KVM extensions, i.e. a static array
with KVMCPUConfig objs that will be read/write during init and so on.
But to do that properly we must be able to declare a static array that
hold KVM regs.
C does not allow to init static arrays and use functions as
initializers, e.g. we can't do:
.kvm_reg_id = kvm_riscv_reg_id_ulong(...)
When instantiating the array. We can do that with macros though, so our
goal is turn kvm_riscv_reg_ulong() in a macro. It is cleaner to turn
every other reg_id_*() function in macros, and ulong will end up using
the macros for u32 and u64, so we'll start with them.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b609610349)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'reglist' is being g-malloc'ed but never freed.
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 906af6de94)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove an unused 'KVMScratchCPU' pointer argument in
kvm_riscv_check_sbi_dbcn_support().
Put kvm_riscv_reset_regs_csr() after kvm_riscv_put_regs_csr(). This will
make a future patch diff easier to read, when changes in
kvm_riscv_reset_regs_csr() and kvm_riscv_get_regs_csr() will be made.
Fixes: a6b53378f5 ("target/riscv/kvm: implement SBI debug console (DBCN) calls")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429124421.223883-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 73f81da0a3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vslidedown always zeroes elements past vl, where it should use the
tail policy.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250414213006.3509058-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 2669b696e2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the v spec, the encodings of vcomoress.vm and vector
mask-register logical instructions with vm=0 are reserved.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 8539a1244b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit db21c3eb05)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
The vd of vector widening mul-add instructions is one of the input
operands.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 1f090a229f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 411eefd56a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b5480a693e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit fda68acb77)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Handle the overlap of source registers with different EEWs.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit fbeaf35838)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the v spec, a vector register cannot be used to provide source
operands with more than one EEW for a single instruction.
The vs1 EEW of vrgatherei16.vv is 16.
Co-authored-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 629c2a8dd7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit b0450a101d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add the relevant ISA paragraphs explaining why source (and destination)
registers cannot overlap the mask register.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20250408103938.3623486-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 3e8d1e4a62)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The j pseudoinstruction maps to a JAL instruction, which can only handle
a jump to somewhere with a signed 20-bit destination. In case of static
linking and LTO'ing this easily leads to "relocation truncated to fit"
error.
Switch to use tail pseudoinstruction, which is the standard way to
tail-call a function in medium code model (emits AUIPC+JALR).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250417072206.364008-1-uwu@icenowy.me>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 22b448ccc6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On big endian systems, pte and updated_pte hold big endian host data
while pte_pa points to little endian target data. This means the branch
at cpu_helper.c:1669 will be always satisfied and restart translation,
causing an endless translation loop.
The correctness of this patch can be deduced by:
old_pte will hold value either from cpu_to_le32/64(pte) or
cpu_to_le32/64(updated_pte), both of wich is litte endian. After that,
an in-place conversion by le32/64_to_cpu(old_pte) ensures that old_pte
now is in native endian, same with pte. Therefore, the endianness of the
both side of if (old_pte != pte) is correct.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250415080254.3667878-2-ziqiaokong@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit ad63158bdb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qtest_set_command_cb passed to g_once should match GThreadFunc,
which it does not. But using g_once is actually unnecessary,
because the function is called by riscv_harts_realize() under
the Big QEMU Lock.
Reported-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250410161722.595634-1-pbonzini@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 56cde18d04)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With Machine Mode Lockdown (mseccfg.MML) set and RLB not set, checks on pmpcfg
writes would match the wrong cases of Smepmp truth table.
The existing code allows writes for the following cases:
- L=1, X=0: cases 8, 10, 12, 14
- L=0, RWX!=WX: cases 0-2, 4-6
This leaves cases 3, 7, 9, 11, 13, 15 for which writes are ignored.
From the Smepmp specification: "Adding a rule with executable privileges that
either is M-mode-only or a locked Shared-Region is not possible (...)" This
description matches cases 9-11, 13 of the truth table.
This commit implements an explicit check for these cases by using
pmp_get_epmp_operation to convert between PMP configuration and Smepmp truth
table cases.
Signed-off-by: Loïc Lefort <loic@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20250313193011.720075-4-loic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 19cf1a7d9e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When Smepmp is supported, mseccfg.RLB allows bypassing locks when writing CSRs
but should not affect interpretation of actual PMP rules.
This is not the case with the current implementation where pmp_hart_has_privs
calls pmp_is_locked which implements mseccfg.RLB bypass.
This commit implements the correct behavior by removing mseccfg.RLB bypass from
pmp_is_locked.
RLB bypass when writing CSRs is implemented by adding a new pmp_is_readonly
function that calls pmp_is_locked and check mseccfg.RLB. pmp_write_cfg and
pmpaddr_csr_write are changed to use this new function.
Signed-off-by: Loïc Lefort <loic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20250313193011.720075-2-loic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 4541d205f0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit cd59f50ab0 caused a regression on nvme hotplugging for devices
with an implicit nvm subsystem.
The nvme-subsys device was incorrectly left with being marked as
non-hotpluggable. Fix this.
Cc: qemu-stable@nongnu.org
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Tested-by: Stéphane Graber <stgraber@stgraber.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2950
Fixes: cd59f50ab0 ("hw/nvme: always initialize a subsystem")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 0b1c23a582)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio-net expects set_features() will be called when the feature set
used by the guest changes to update the number of virtqueues but it is
not called during reset, which will clear all features, leaving the
queues added for VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS. Not only these
extra queues are visible to the guest, they will cause segmentation
fault during migration.
Call set_features() during reset to remove those queues for virtio-net
as we call set_status(). It will also prevent similar bugs for
virtio-net and other devices in the future.
Fixes: f9d6dbf0bf ("virtio-net: remove virtio queues if the guest doesn't support multiqueue")
Buglink: https://issues.redhat.com/browse/RHEL-73842
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250421-reset-v2-1-e4c1ead88ea1@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0caed25cd1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ASAN spotted a leaking string in machine_set_loadparm():
Direct leak of 9 byte(s) in 1 object(s) allocated from:
#0 0x560ffb5bb379 in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:69:3
#1 0x7f1aca926518 in g_malloc ../glib/gmem.c:106
#2 0x7f1aca94113e in g_strdup ../glib/gstrfuncs.c:364
#3 0x560ffc8afbf9 in qobject_input_type_str ../qapi/qobject-input-visitor.c:542:12
#4 0x560ffc8a80ff in visit_type_str ../qapi/qapi-visit-core.c:349:10
#5 0x560ffbe6053a in machine_set_loadparm ../hw/s390x/s390-virtio-ccw.c:802:10
#6 0x560ffc0c5e52 in object_property_set ../qom/object.c:1450:5
#7 0x560ffc0d4175 in object_property_set_qobject ../qom/qom-qobject.c:28:10
#8 0x560ffc0c6004 in object_property_set_str ../qom/object.c:1458:15
#9 0x560ffbe2ae60 in update_machine_ipl_properties ../hw/s390x/ipl.c:569:9
#10 0x560ffbe2aa65 in s390_ipl_update_diag308 ../hw/s390x/ipl.c:594:5
#11 0x560ffbdee132 in handle_diag_308 ../target/s390x/diag.c:147:9
#12 0x560ffbebb956 in helper_diag ../target/s390x/tcg/misc_helper.c:137:9
#13 0x7f1a3c51c730 (/memfd:tcg-jit (deleted)+0x39730)
Cc: qemu-stable@nongnu.org
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250509174938.25935-1-farosas@suse.de>
Fixes: 1fd396e322 ("s390x: Register TYPE_S390_CCW_MACHINE properties as class properties")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit bdf12f2a56)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch fixes two different bugs in v9fs_reclaim_fd():
1. Reduce latency:
This function calls v9fs_co_close() and v9fs_co_closedir() in a loop. Each
one of the calls adds two thread hops (between main thread and a fs driver
background thread). Each thread hop adds latency, which sums up in
function's loop to a significant duration.
Reduce overall latency by open coding what v9fs_co_close() and
v9fs_co_closedir() do, executing those and the loop itself altogether in
only one background thread block, hence reducing the total amount of
thread hops to only two.
2. Fix file descriptor leak:
The existing code called v9fs_co_close() and v9fs_co_closedir() to close
file descriptors. Both functions check right at the beginning if the 9p
request was cancelled:
if (v9fs_request_cancelled(pdu)) {
return -EINTR;
}
So if client sent a 'Tflush' message, v9fs_co_close() / v9fs_co_closedir()
returned without having closed the file descriptor and v9fs_reclaim_fd()
subsequently freed the FID without its file descriptor being closed, hence
leaking those file descriptors.
This 2nd bug is fixed by this patch as well by open coding v9fs_co_close()
and v9fs_co_closedir() inside of v9fs_reclaim_fd() and not performing the
v9fs_request_cancelled(pdu) check there.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Fixes: bccacf6c79 ('hw/9pfs: Implement TFLUSH operation')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5747469d3f039c53147e850b456943a1d4b5485c.1741339452.git.qemu_oss@crudebyte.com>
(cherry picked from commit 89f7b4da76)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Even though this function is serialized to be always called from main
thread, v9fs_reclaim_fd() is dispatching the coroutine to a worker thread
in between via its v9fs_co_*() calls, hence leading to the situation where
v9fs_reclaim_fd() is effectively executed multiple times simultaniously,
which renders its LRU algorithm useless and causes high latency.
Fix this by adding a simple boolean variable to ensure this function is
only called once at a time. No synchronization needed for this boolean
variable as this function is only entered and returned on main thread.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5c622067efd66dd4ee5eca740dcf263f41db20b2.1741339452.git.qemu_oss@crudebyte.com>
(cherry picked from commit 61da38db70)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the i.MX 8M Plus reference manual, the status flag
I2C_I2SR[IIF] continues to be set when an interrupt condition
occurs even when I2C interrupts are disabled (I2C_I2CR[IIEN] is
clear). However, the device model only sets the flag when I2C
interrupts are enabled which causes U-Boot to loop forever. Fix
the device model by always setting the flag and let I2C_I2CR[IIEN]
guard I2C interrupts only.
Also remove the comment in the code since it merely stated the
obvious and would be outdated now.
Cc: qemu-stable@nongnu.org
Fixes: 20d0f9cf6a ("i.MX: Add I2C controller emulator")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-ID: <20250507124040.425773-1-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 54e54e594b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Today, we don't track write-abiliy in the cache, if a user
requests a readable mapping followed by a writeable mapping
on the same page, the second lookup will incorrectly hit
the readable entry.
Split mapcache_grants by ro and rw access. Grants will now
have separate ways in the cache depending on writeability.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
(cherry picked from commit 88fb705600)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If we have request without lock and hit unlocked or invalid
entry during the search, we remap it immediately,
even if we have matching entry in next entries in bucket.
This leads to duplication of mappings of the same size,
and to possibility of selecting the wrong element
during invalidation and underflow it's entry->lock counter
Signed-off-by: Aleksandr Partanen <alex.pentagrid@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
(cherry picked from commit a4b20f737c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
STI will trigger a singlestep exception even if it has inhibit-IRQ
behavior. Do not suppress single-step for all IRQ-inhibiting
instructions, instead special case MOV SS and POP SS.
Cc: qemu-stable@nongnu.org
Fixes: f0f0136abb ("target/i386: no single-step exception after MOV or POP SS", 2024-05-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1e94ddc685)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Because LSS need not trigger an IRQ shadow, gen_movl_seg can't just use
the destination register to decide whether to inhibit IRQs. Add an
argument.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e54ef98c8a)
(back-ported to 10.0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to the i.MX 8M Plus reference manual, a GPIO pin is
configured as an output when the corresponding bit in the GDIR
register is set. The function imx_gpio_set_int_line() is intended to
be a no-op if the pin is configured as an output, returning early in
such cases. However, it inverts the condition. Fix this by
returning early when the bit is set.
cc: qemu-stable@nongnu.org
Fixes: f442728097 ("i.MX: Add GPIO device")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250501183445.2389-4-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit eba837a31b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sphinx requires that labels within documents are unique across the
whole manual. This is because the "create a hyperlink" directive
specifies only the name of the label, not a filename+label. Some
Sphinx versions will warn about duplicate labels, but even if there
is no warning there is still an ambiguity and no guarantee that the
hyperlink will be created to the right target.
For QEMU this is awkward, because we have various .rst.inc fragments
which we include into multiple .rst files. If you define a label in
the .rst.inc file then it will be a duplicate label. We have mostly
worked around this by not putting labels into those .rst.inc files,
or by adding "insert a label" functionality into the hxtool extension
(see commit 1eeb432a95 "doc/sphinx/hxtool.py: add optional label
argument to SRST directive").
Unfortunately in commit 7f6314427e ("docs/devel: add a codebase
section") we accidentally added a duplicate label, because not all
Sphinx versions warn about the mistake.
In this case the link was only from the developer docs codebase
summary, so as the simplest fix for the stable branch, we drop
the link entirely.
Cc: qemu-stable@nongnu.org
Fixes: 1eeb432a95 "doc/sphinx/hxtool.py: add optional label argument to SRST directive"
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20250501093126.716667-1-peter.maydell@linaro.org
(cherry picked from commit 82707dd4f0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the guest code has an ISB or SB insn inside an IT block, we
generate incorrect code which trips a TCG assertion:
qemu-system-arm: ../tcg/tcg-op.c:3343: void tcg_gen_goto_tb(unsigned int): Assertion `(tcg_ctx->goto_tb_issue_mask & (1 << idx)) == 0' failed.
This is because we call gen_goto_tb(dc, 1, ...) twice:
brcond_i32 ZF,$0x0,ne,$L1
add_i32 pc,pc,$0x4
goto_tb $0x1
exit_tb $0x73d948001b81
set_label $L1
add_i32 pc,pc,$0x4
goto_tb $0x1
exit_tb $0x73d948001b81
Both calls are in arm_tr_tb_stop(), one for the
DISAS_NEXT/DISAS_TOO_MANY handling, and one for the dc->condjump
condition-failed codepath. The DISAS_NEXT handling doesn't have this
problem because arm_post_translate_insn() does the handling of "emit
the label for the condition-failed conditional execution" and so
arm_tr_tb_stop() doesn't have dc->condjump set. But for
DISAS_TOO_MANY we don't do that.
Fix the bug by making arm_post_translate_insn() handle the
DISAS_TOO_MANY case. This only affects the SB and ISB insns when
used in Thumb mode inside an IT block: only these insns specifically
set is_jmp to TOO_MANY, and their A32 encodings are unconditional.
For the major TOO_MANY case (breaking the TB because it would cross a
page boundary) we do that check and set is_jmp to TOO_MANY only after
the call to arm_post_translate_insn(); so arm_post_translate_insn()
sees is_jmp == DISAS_NEXT, and we emit the correct code for that
situation.
With this fix we generate the somewhat more sensible set of TCG ops:
brcond_i32 ZF,$0x0,ne,$L1
set_label $L1
add_i32 pc,pc,$0x4
goto_tb $0x1
exit_tb $0x7c5434001b81
(NB: the TCG optimizer doesn't optimize out the jump-to-next, but
we can't really avoid emitting it because we don't know at the
point we're emitting the handling for the condexec check whether
this insn is going to happen to be a nop for us or not.)
Cc: qemu-stable@nongnu.org
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2942
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250501125544.727038-1-peter.maydell@linaro.org
(cherry picked from commit 8ed7c0b648)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
NPCM8XX SoC is the successor of the NPCM7XX. It features quad-core
Cortex-A35 (Armv8, 64-bit) CPUs and some additional peripherals.
Correct the `valid_cpu_types` setting to match the NPCM8XX SoC.
Cc: qemu-stable@nongnu.org
Fixes: 7e70eb3cad ("hw/arm: Add NPCM845 Evaluation board")
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Message-id: 20250428022934.3081139-1-timlee660101@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 97cdd1b0a7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we changed decode_sleb128 from target_long to
int64_t, we failed to adjust the shift limit.
Cc: qemu-stable@nongnu.org
Fixes: c9ad8d27ca ("tcg: Widen gen_insn_data to uint64_t")
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 9401f91b9b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
macOS SDK may have the symbol of strchrnul(), but it is actually
available only on macOS 15.4 or later and that fact is codified in
string.h. Include the header file using osdep_prefix to check if the
function is available on the deployment target.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250424-buildsys-v1-4-97655e3b25d7@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit a5b30be534)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
gnu_source_prefix defines _GNU_SOURCE for compiler object functions.
The definition is universally available in the code base.
docs/devel/style.rst also says that the "qemu/osdep.h" header is
always included, so files included in the file is also universally
available in the code base.
Rename gnu_source_prefix to osdep_prefix, and add #include directives
that are referred by the users of gnu_source_prefix and contained in
qemu/osdep.h to safely de-duplicate #include directives.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250424-buildsys-v1-3-97655e3b25d7@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 797150d69d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CONFIG_STATX and CONFIG_STATX_MNT_ID are not used since commit
e0dc2631ec ("virtiofsd: Remove source").
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250424-buildsys-v1-2-97655e3b25d7@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 6804b89fb5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The use of gnu_source_prefix in the detection of getcpu() was
ineffective because the header file that declares getcpu() when
_GNU_SOURCE is defined was not included. Pass sched.h to
has_header_symbol() so that the existence of the declaration will be
properly checked.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250424-buildsys-v1-1-97655e3b25d7@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 563cd698df)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix a wrong conversion to gen_op_addr_addi(). The framesize should be
added like it was done before.
This bug broke booting OpenWrt MIPS32 BE malta Linux system images
generated by OpenWrt.
Cc: qemu-stable@nongnu.org
Fixes: d0b24b7f50 ("target/mips: Use gen_op_addr_addi() when possible")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250412194003.181411-1-hauke@hauke-m.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d4a785ba30)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The documentation for the CPUClass::gdb_arch_name method claims that
the returned string should be freed with g_free(). This is not
correct: in commit a650683871 we changed this method to
instead return a simple constant string, but forgot to update
the documentation.
Make the documentation match the new semantics.
Fixes: a650683871 ("hw/core/cpu: Return static value with gdb_arch_name()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250317142819.900029-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 56a9f0d4c4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit 62b4a227a3 the default cpu type can come from the
valid_cpu_types[] array. Call the machine_class_default_cpu_type()
instead of accessing MachineClass::default_cpu_type field.
Cc: qemu-stable@nongnu.org
Fixes: 62b4a227a3 ("hw/core: Add machine_class_default_cpu_type()")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250422084114.39499-1-philmd@linaro.org>
(cherry picked from commit d5f241834b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The comment about not being able to define a field with
zero bits is out of date since 94597b6146
("decodetree: Allow !function with no input bits").
This fixes the missing load of imm in the disassembler.
Cc: qemu-stable@nongnu.org
Fixes: 9d8caa67a2 ("target/avr: Add support for disassembling via option '-d in_asm'")
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6b661b7ed7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clear the flags before adding in the ones computed from lflags.
Cc: Wei Liu <liuwe@linux.microsoft.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 94a159f3dc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 3f2a05b31e ("target/i386: Reset TSCs of parked vCPUs too on VM
reset") introduced a way to reset TSCs of parked vCPUs during VM reset to
prevent them getting desynchronized with the online vCPUs and therefore
causing the KVM PV clock to lose PVCLOCK_TSC_STABLE_BIT.
The way this was done was by registering a parked vCPU-specific QEMU reset
callback via qemu_register_reset().
However, it turns out that on particularly device-rich VMs QEMU reset
callbacks can take a long time to execute (which isn't surprising,
considering that they involve resetting all of VM devices).
In particular, their total runtime can exceed the 1-second TSC
synchronization window introduced in KVM commit 5d3cb0f6a8e3 ("KVM:
Improve TSC offset matching").
Since the TSCs of online vCPUs are only reset from "synchronize_post_reset"
AccelOps handler (which runs after all qemu_register_reset() handlers) this
essentially makes that fix ineffective on these VMs.
The easiest way to guarantee that these parked vCPUs are reset at the same
time as the online ones (regardless how long it takes for VM devices to
reset) is to piggyback on post-reset vCPU synchronization handler for one
of online vCPUs - as there is no generic post-reset AccelOps handler that
isn't per-vCPU.
The first online vCPU was selected for that since it is easily available
under "first_cpu" define.
This does not create an ordering issue since the order of vCPU TSC resets
does not matter.
Fixes: 3f2a05b31e ("target/i386: Reset TSCs of parked vCPUs too on VM reset")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/e8b85a5915f79aa177ca49eccf0e9b534470c1cd.1743099810.git.maciej.szmigiero@oracle.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit f6b5f71f04)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The model number was mistakenly set to 0x0b (11) in commit ff04bc1ac4.
The correct value is 0x5b. This mistake occurred because the extended
model bits in cpuid[eax=0x1].eax were overlooked, and only the base
model was used.
Using the wrong model number can affect guest behavior. One known issue
is that vPMU (which relies on the model number) may fail to operate
correctly.
This patch corrects the model field by introducing a new vCPU version.
Fixes: ff04bc1ac4 ("target/i386: Introduce Zhaoxin Yongfeng CPU model")
Signed-off-by: Ewan Hai <ewanhai-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20250414075342.411626-1-ewanhai-oc@zhaoxin.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 280712b787)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 7987d2be5a.
The goal was to remove the need to patch the (const) input buffer
with a recomputed UDP checksum by copying headers to a RW region and
inject the checksum there. The patch computed the checksum only from the
header fields (missing the rest of the payload) producing an invalid one
and making guests fail to acquire a DHCP lease.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2727
Cc: qemu-stable@nongnu.org
Signed-off-by: Antoine Damhet <adamhet@scaleway.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250408145345.142947-1-adamhet@scaleway.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
