While working out what hoops to jump through to get a full set of
aarch32 packages installed on the aarch64 runner it was pointed out 32
bit host support is deprecated. As the extra packages where needed for
system emulation (marked deprecated since 8.0!) there didn't seem much
point keeping this in.
While the full expunging of 32 bit host support will probably be done
for 11.0 we can at least reduce the CI burden a bit now.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20251016150357.876415-3-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The download cache of the functional tests is currently only growing.
But sometimes tests get removed or changed to use different assets,
thus we should clean up the stale old assets after a while when they
are not in use anymore. So add a script that looks at the time stamps
of the assets and removes them if they haven't been touched for more
than half of a year. Since there might also be some assets around that
have been added to the cache before we added the time stamp files,
assume a default time stamp that is close to the creation date of this
patch, so that we don't delete these files too early (so we still have
all assets around in case we have to bisect an issue in the recent past
of QEMU).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251014083424.103202-3-thuth@redhat.com>
Introduce headers for the Microsoft Hypervisor (MSHV) userspace ABI,
including IOCTLs and structures used to interface with the hypervisor.
These definitions are based on the upstream Linux MSHV interface and
will be used by the MSHV accelerator backend in later patches.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250916164847.77883-6-magnuskulke@linux.microsoft.com
[Do not use __uN types. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a Meson feature option and default-config entry to allow
building QEMU with MSHV (Microsoft Hypervisor) acceleration support.
This is the first step toward implementing an MSHV backend in QEMU.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250916164847.77883-2-magnuskulke@linux.microsoft.com
[Add error for unavailable accelerator. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- tweak .gitpublish base to origin/master
- restore .gitmodules to qemu-project hosts
- drop 64 bits guests from i686
- update aarch64/s390x custom runners to 24.04
- tweak gitlab-runner registration method
- make check-venv dependency for functional tests
- replace avocado's gdb support with pygdbmi
- remove avocado dependencies from reverse_debug tests
- ensure replay.bin doesn't loose events after SHUTDOWN_HOST_QMP
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmjk1K8ACgkQ+9DbCVqe
KkSMAQf/X/vltf2njNMiBtlEh3H5j7RHFYs83V+UYa1m2DRSrx9B8dBDwTv+kqeh
KRSnHMufdVuqKhaPAavvI4v4E1kqjjTy1U4YjjMA7zKPrTafJHGhI6QGiQ3i7vhA
3/XTiqYhTJZfVFGDWlTkE8GbmTsT+mQVwt2BCoKjazibGVNWvRwUcWk81cNw/YI5
e28dRbDCB+K03y+QVhyEOVBm59r0Qft0v3nLMq8+kGxW/Nh0oGKpuagWT2D24Tp0
bEMlkcMJv20fVV9wd5f8NmAyMucczkt2vuLhghA/wUQveO0jBJwMxoMfgiGtlI1s
iy1Q1iFx7bMEOeHO2fDQSvAfSXzvSw==
=m/Gd
-----END PGP SIGNATURE-----
Merge tag 'pull-10.2-maintainer-071025-1' of https://gitlab.com/stsquad/qemu into staging
testing updates
- tweak .gitpublish base to origin/master
- restore .gitmodules to qemu-project hosts
- drop 64 bits guests from i686
- update aarch64/s390x custom runners to 24.04
- tweak gitlab-runner registration method
- make check-venv dependency for functional tests
- replace avocado's gdb support with pygdbmi
- remove avocado dependencies from reverse_debug tests
- ensure replay.bin doesn't loose events after SHUTDOWN_HOST_QMP
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmjk1K8ACgkQ+9DbCVqe
# KkSMAQf/X/vltf2njNMiBtlEh3H5j7RHFYs83V+UYa1m2DRSrx9B8dBDwTv+kqeh
# KRSnHMufdVuqKhaPAavvI4v4E1kqjjTy1U4YjjMA7zKPrTafJHGhI6QGiQ3i7vhA
# 3/XTiqYhTJZfVFGDWlTkE8GbmTsT+mQVwt2BCoKjazibGVNWvRwUcWk81cNw/YI5
# e28dRbDCB+K03y+QVhyEOVBm59r0Qft0v3nLMq8+kGxW/Nh0oGKpuagWT2D24Tp0
# bEMlkcMJv20fVV9wd5f8NmAyMucczkt2vuLhghA/wUQveO0jBJwMxoMfgiGtlI1s
# iy1Q1iFx7bMEOeHO2fDQSvAfSXzvSw==
# =m/Gd
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Oct 2025 01:51:59 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.2-maintainer-071025-1' of https://gitlab.com/stsquad/qemu:
record/replay: fix race condition on test_aarch64_reverse_debug
tests/functional: Adapt arches to reverse_debugging w/o Avocado
tests/functional: Adapt reverse_debugging to run w/o Avocado
tests/functional: Add decorator to skip test on missing env vars
tests/functional: drop datadrainer class in reverse debugging
tests/functional: replace avocado process with subprocess
tests/functional: Add GDB class
tests/functional: Provide GDB to the functional tests
python: Install pygdbmi in meson's venv
tests/functional: Re-activate the check-venv target
scripts/ci: use recommended registration command
gitlab: move custom runners to Ubuntu 24.04
tests/lcitool: bump custom runner packages to Ubuntu 24.04
tests/lcitool: drop 64 bit guests from i686 cross build
.gitmodules: restore qemu-project mirror of u-boot-sam460ex
.gitmodules: restore qemu-project mirror of u-boot
.gitpublish: use origin/master as default base
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The probe of GDB is done in 'configure' and the full path is passed to
meson.build via the -Dgdb=option.
Meson then can pass the location of GDB to the functional tests via an
environment variable: QEMU_TEST_GDB.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20251003141820.85278-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The registration-token method is being deprecated:
https://docs.gitlab.com/ci/runners/new_creation_workflow/
As a result we can drop a bunch of the descriptive stuff as that is
entered on the web UI. We don't need a secondary runner if we just
create one with both aarch64 and aarch32 tags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-8-alex.bennee@linaro.org>
In anticipation of new runners lets move to a newer Ubuntu LTS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-6-alex.bennee@linaro.org>
The legacy cpu_physical_memory_rw() method is no more used,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251002084203.63899-16-philmd@linaro.org>
Following the mechanical changes of commit adeefe0167 ("Avoid
cpu_physical_memory_rw() with a constant is_write argument"),
replace:
- cpu_physical_memory_rw(, is_write=false) -> address_space_read()
- cpu_physical_memory_rw(, is_write=true) -> address_space_write()
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251002084203.63899-15-philmd@linaro.org>
users can now control VM bit in smbios.
vhost-user-device is now user-createable.
intel_iommu now supports PRI
virtio-net now supports GSO over UDP tunnel
ghes now supports error injection
amd iommu now supports dma remapping for vfio
better error messages for virtio
small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmji0s0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpuH4H/09h70IqAWZGHIWKGmmGGtdKOj3g54KuI0Ss
mGECEsHvvBexOy670Qy8jdgXfaW4UuNui8BiOnJnGsBX8Y0dy+/yZori3KhkXkaY
D57Ap9agkpHem7Vw0zgNsAF2bzDdlzTiQ6ns5oDnSq8yt82onCb5WGkWTGkPs/jL
Gf8Jv+Ddcpt5SU4/hHPYC8pUhl7z4xPOOyl0Qp1GG21Pxf5v4sGFcWuGGB7UEPSQ
MjZeoM0rSnLDtNg18sGwD5RPLQs13TbtgsVwijI79c3w3rcSpPNhGR5OWkdRCIYF
8A0Nhq0Yfo0ogTht7yt1QNPf/ktJkuoBuGVirvpDaix2tCBECes=
=Zvq/
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features, fixes
users can now control VM bit in smbios.
vhost-user-device is now user-createable.
intel_iommu now supports PRI
virtio-net now supports GSO over UDP tunnel
ghes now supports error injection
amd iommu now supports dma remapping for vfio
better error messages for virtio
small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmji0s0PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpuH4H/09h70IqAWZGHIWKGmmGGtdKOj3g54KuI0Ss
# mGECEsHvvBexOy670Qy8jdgXfaW4UuNui8BiOnJnGsBX8Y0dy+/yZori3KhkXkaY
# D57Ap9agkpHem7Vw0zgNsAF2bzDdlzTiQ6ns5oDnSq8yt82onCb5WGkWTGkPs/jL
# Gf8Jv+Ddcpt5SU4/hHPYC8pUhl7z4xPOOyl0Qp1GG21Pxf5v4sGFcWuGGB7UEPSQ
# MjZeoM0rSnLDtNg18sGwD5RPLQs13TbtgsVwijI79c3w3rcSpPNhGR5OWkdRCIYF
# 8A0Nhq0Yfo0ogTht7yt1QNPf/ktJkuoBuGVirvpDaix2tCBECes=
# =Zvq/
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 05 Oct 2025 01:19:25 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [unknown]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (75 commits)
virtio: improve virtqueue mapping error messages
pci: Fix wrong parameter passing to pci_device_get_iommu_bus_devfn()
intel_iommu: Simplify caching mode check with VFIO device
intel_iommu: Enable Enhanced Set Root Table Pointer Support (ESRTPS)
vdpa-dev: add get_vhost() callback for vhost-vdpa device
amd_iommu: HATDis/HATS=11 support
intel-iommu: Move dma_translation to x86-iommu
amd_iommu: Refactor amdvi_page_walk() to use common code for page walk
amd_iommu: Do not assume passthrough translation when DTE[TV]=0
amd_iommu: Toggle address translation mode on devtab entry invalidation
amd_iommu: Add dma-remap property to AMD vIOMMU device
amd_iommu: Set all address spaces to use passthrough mode on reset
amd_iommu: Toggle memory regions based on address translation mode
amd_iommu: Invalidate address translations on INVALIDATE_IOMMU_ALL
amd_iommu: Add replay callback
amd_iommu: Unmap all address spaces under the AMD IOMMU on reset
amd_iommu: Use iova_tree records to determine large page size on UNMAP
amd_iommu: Sync shadow page tables on page invalidation
amd_iommu: Add basic structure to support IOMMU notifier updates
amd_iommu: Add a page walker to sync shadow page tables on invalidation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_bh_new_guarded() is considered legacy since commit 9c86c97f12
("async: Add an optional reentrancy guard to the BH API"); recommend
the new API: aio_bh_new_guarded().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250924163911.51479-1-philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Such annotation is present into the kernel uAPI headers since
v6.7, and will be used soon by the vhost_type.h. Deal with it
just stripping it.
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <a1430f43cc954d2a931fa60581bda6d6af4bc771.1758549625.git.pabeni@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The syslog backend needs the syslog function from libc and the LOG_INFO enum
value; they are re-exported as "::trace::syslog" and "::trace::LOG_INFO"
so that device crates do not all have to add the libc dependency, but
otherwise there is nothing special.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-17-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generating .rs files makes it possible to support tracing in rust.
This support comprises a new format, and common code that converts
the C expressions in trace-events to Rust. In particular, types
need to be converted, and PRI macros expanded.
As of this commit no backend generates Rust code, but it is already
possible to use tracetool to generate Rust sources; they are not
functional but they compile and contain tracepoint functions.
[Move Rust argument conversion from Event to Arguments; string
support. - Paolo]
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-9-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use CHECK_TRACE_EVENT_GET_STATE in log, syslog, dtrace and simple
backend, so that the "if (trace_event_get_state)" is created from common
code and unified when multiple backends are active.
When a single backend is active there is no code change (except
for the log backend, as shown in tests/tracetool/log.h), but the
code in the backends is simpler.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250929154938.594389-8-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new attribute CHECK_TRACE_EVENT_GET_STATE to the backends.
When present and True, the code generated by the generate function
is wrapped in a conditional that checks whether the event is enabled;
this removes the need for repeating the same conditional in multiple
backends.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250929154938.594389-7-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the Python code and reduces the size of the tracepoints.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250929154938.594389-6-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-5-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "-*- coding: utf-8 -*-" header was needed in Python 2,
but in Python 3 UTF-8 is already the default encoding of
source files.
It is even less necessary in .css files that do not have UTF-8
sequences at all.
Suggested-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-4-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove a bunch of dead code from tracetool.
In particular, there are no tcg-exec events anymore and the sub-event
functionality was only used for it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-3-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
try_import returns a tuple of a boolean and the requested module or attribute.
exists() functions return tracetool.try_import("tracetool.format." + name)[1]
but they should return the boolean value instead.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250929154938.594389-2-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some distros/targets may pull it by default, but some don't.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250924120426.2158655-16-marcandre.lureau@redhat.com>
Newer lcitool version has various fixes helping QEMU CI and this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250924120426.2158655-13-marcandre.lureau@redhat.com>
Implement a bash version of rust-bindgen rust_to_clang_target() to
convert from rust target to clang target.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250924120426.2158655-8-marcandre.lureau@redhat.com>
Running meson on each subproject is quite slow.
According to Paolo, meson will run download tasks in parallel.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250924120426.2158655-4-marcandre.lureau@redhat.com>
When running the license check, if we are updating a license it is
possible for the checkpatch script to test against old license lines
instead of newer ones, since the removal lines appear before the
addition lines in a .patch file.
Fix this by skipping over lines that start with "-" in the checkpatch
script.
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250916165928.10048-1-nabihestefan@google.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250922093711.2768983-4-alex.bennee@linaro.org>
This is a script designed to collect data from multiple pipelines and
analyse the failure modes they have. By default it will probe the last
3 failed jobs on the staging branch. However this can all be
controlled by the CLI:
./scripts/ci/gitlab-failure-analysis --count 2 --branch=testing/next --id 39915562 --status=
running pipeline 2028486060, total jobs 125, skipped 5, failed 0, 39742 tests, 0 failed tests
success pipeline 2015018135, total jobs 125, skipped 5, failed 0, 49219 tests, 0 failed tests
You can also skip failing jobs and just dump the tests:
./scripts/ci/gitlab-failure-analysis --branch= --id 39915562 --status= --skip-jobs --pipeline 1946202491 1919542960
failed pipeline 1946202491, total jobs 127, skipped 5, failed 26, 38742 tests, 278 skipped tests, 2 failed tests
Failed test qemu.qemu:qtest+qtest-s390x / qtest-s390x/boot-serial-test, check-system-opensuse, 1 /s390x/boot-serial/s390-ccw-virtio - FATAL-ERROR: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sW77EA3'
Failed test qemu.qemu:qtest+qtest-aarch64 / qtest-aarch64/arm-cpu-features, check-system-opensuse, 1 /aarch64/arm/query-cpu-model-expansion - ERROR:../tests/qtest/arm-cpu-features.c:459:test_query_cpu_model_expansion: assertion failed (_error == "The CPU type 'host' requires KVM"): ("The CPU type 'host' requires hardware accelerator" == "The CPU type 'host' requires KVM")
failed pipeline 1919542960, total jobs 127, skipped 5, failed 2, 48753 tests, 441 skipped tests, 1 failed tests
Failed test qemu.qemu:unit / test-aio, msys2-64bit, 12 /aio/timer/schedule - ERROR:../tests/unit/test-aio.c:413:test_timer_schedule: assertion failed: (aio_poll(ctx, true))
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250922093711.2768983-3-alex.bennee@linaro.org>
The attrs crate is a simple combinator-based for Rust attributes. It
will be used instead of a handwritten parser.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* tests, scripts: Don't import print_function from __future__
* Implement FEAT_ATS1A
* Remove deprecated pxa CPU family
* arm/kvm: report registers we failed to set
* Expose SME registers to GDB via gdbstub
* linux-user/aarch64: Generate ESR signal records
* hw/arm/raspi4b: remove redundant check in raspi_add_memory_node
* hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
* system: drop the -old-param option
-----BEGIN PGP SIGNATURE-----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=5tK3
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250916' of https://gitlab.com/pm215/qemu into staging
target-arm queue:
* tests, scripts: Don't import print_function from __future__
* Implement FEAT_ATS1A
* Remove deprecated pxa CPU family
* arm/kvm: report registers we failed to set
* Expose SME registers to GDB via gdbstub
* linux-user/aarch64: Generate ESR signal records
* hw/arm/raspi4b: remove redundant check in raspi_add_memory_node
* hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
* system: drop the -old-param option
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmjJpt8ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vRGEACO3VrePiMIA9N7egqlUiGn
# aRQVqIKeuPVj6TRVG7BSNWlAX8qvnOWOKg1yGVHDZv/nLvRje9UyfUAw7pf6jXod
# bzxWBCPJ0J0eOB64Tz87WRCLltKB5pEN+uIG00PtpBcXT1ixYCDgBZXyD3mwuJ4Q
# 5Yc5hEwQzpmh+EycLtfCHbmjKDw3x1ncpVlGceOG4h5fvzIvIhcNcZJXfAHhbhyO
# Y4c5PELrCkCLZaTtSSxd6VJ+vXQ9bNWyKaSZu2KRRnLcMeAqw2Ic7dLPlkzCVyxM
# PTOHy4TuDu+kqCbkxdnhpI6fvq5kcHyfTL6qX6tth8ZZS+qKGtvMEIXnYoy6q1kh
# 4jV5vizK8avx31fSiuTKVpttRv4dC+Aq5QrcgYtIVMeOwtkWHv610D8gcFPmXoG+
# uHX9WdzOjrYOzXVKzJaCZF6b7L31ptSEfOrx7asBC9k2wPRwonFXg4JGNq16Yann
# aAO5TM7NAUvM2IPgqS+Tf1Bk0iQqORxGfqzCyL76OO/QMMgfBy9elKH0UR0G+ePJ
# yjpub1oWIELSXsQGMrdFo1W4/NIpFMTu3DP9W+6XRPu1AvrAx/AsrTuvSvXoeFY9
# d/U3yWAXm5XxRzbCIUg7ke8I8zLwRz924M5PA8vophvSnfDLS3V8CJHLwbz/PqYc
# 0P2KCeI6d2NIhVik4mgEoQ==
# =5tK3
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 16 Sep 2025 11:05:19 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [unknown]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [unknown]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [unknown]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250916' of https://gitlab.com/pm215/qemu: (36 commits)
hw/usb/network: Remove hardcoded 0x40 prefix in STRING_ETHADDR response
qtest/bios-tables-test: Update tables for smmuv3 tests
qtest/bios-tables-test: Add tests for legacy smmuv3 and smmuv3 device
bios-tables-test: Allow for smmuv3 test data.
qemu-options.hx: Document the arm-smmuv3 device
hw/arm/virt: Allow user-creatable SMMUv3 dev instantiation
hw/pci: Introduce pci_setup_iommu_per_bus() for per-bus IOMMU ops retrieval
hw/arm/virt: Add an SMMU_IO_LEN macro
hw/arm/virt: Factor out common SMMUV3 dt bindings code
hw/arm/virt-acpi-build: Update IORT for multiple smmuv3 devices
hw/arm/virt-acpi-build: Re-arrange SMMUv3 IORT build
hw/arm/smmu-common: Check SMMU has PCIe Root Complex association
target/arm: Added test case for SME register exposure to GDB
target/arm: Added support for SME register exposure to GDB
target/arm: Increase MAX_PACKET_LENGTH for SME ZA remote gdb debugging
arm/kvm: report registers we failed to set
system: drop the -old-param option
target/arm: Drop ARM_FEATURE_IWMMXT handling
target/arm: Drop ARM_FEATURE_XSCALE handling
target/arm: Remove iwmmxt helper functions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Every generated inline probe function is wrapped with a
trivial caller that has a hard-coded condition test:
static inline void _nocheck__trace_test_wibble(void * context, int value)
{
tracepoint(qemu, test_wibble, context, value);
}
static inline void trace_test_wibble(void * context, int value)
{
if (true) {
_nocheck__trace_test_wibble(context, value);
}
}
This was introduced for TCG probes back in
864a2178: trace: [tcg] Do not generate TCG code to trace dynamically-disabled events
but is obsolete since
126d4123 tracing: excise the tcg related from tracetool
This commit removes the wrapping such that we have
static inline void trace_test_wibble(void * context, int value)
{
tracepoint(qemu, test_wibble, context, value);
}
The default build of qemu-system-x86_64 on Fedora with the
'log' backend, has its size reduced by 1 MB
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While these files are auto-generated, a later commit will add
reference output to git, so having SPDX-License-Identifier is
desirable.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU code style is to have no whitespace between "*" and the
arg name. Since generated trace code will soon be added to
git, make it comply with code style.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-4-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sometimes SPDX expressions appear inside C comments, and this
confuses checkpatch.pl. Drop the closing C comment characters
to avoid this.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some of our Python scripts still include the line
from __future__ import print_function
which is intended to allow a Python 2 to handle the Python 3 print()
syntax. This particular part of the future arrived many years ago,
and our minimum Python version is 3.9, so we don't need to keep
this line around.
NB: the scripts in tests/tcg/*/gdbstub/ are run with whatever Python
gdb was built against, but we can safely assume that that was a
Python 3 because our supported distros are all on Python 3. In any
case these are only run as part of "make check-tcg", not by
end-users.
Commit created with:
sed -i -e '/import print_function/d' $(git grep -l 'from __future__')
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250819102409.2117969-1-peter.maydell@linaro.org
Cover the TCG plugins files under their own Coverity category.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250811094341.91597-1-philmd@linaro.org>
We can now delete the old Perl kernel-doc script. For posterity,
this is a complete diff of the local changes that we were carrying
between the kernel's Perl script as of kernel commit 72b97d0b911872ba
(the last time we synced it) and our local copy:
--- /tmp/kdoc 2025-08-14 10:42:47.620331939 +0100
+++ scripts/kernel-doc 2025-02-17 10:44:34.528421457 +0000
@@ -1,5 +1,5 @@
#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: GPL-2.0-only
use warnings;
use strict;
@@ -224,12 +224,12 @@
my $type_fp_param = '\@(\w+)\(\)'; # Special RST handling for func ptr params
my $type_fp_param2 = '\@(\w+->\S+)\(\)'; # Special RST handling for structs with func ptr params
my $type_env = '(\$\w+)';
-my $type_enum = '\&(enum\s*([_\w]+))';
-my $type_struct = '\&(struct\s*([_\w]+))';
-my $type_typedef = '\&(typedef\s*([_\w]+))';
-my $type_union = '\&(union\s*([_\w]+))';
-my $type_member = '\&([_\w]+)(\.|->)([_\w]+)';
-my $type_fallback = '\&([_\w]+)';
+my $type_enum = '#(enum\s*([_\w]+))';
+my $type_struct = '#(struct\s*([_\w]+))';
+my $type_typedef = '#(([A-Z][_\w]*))';
+my $type_union = '#(union\s*([_\w]+))';
+my $type_member = '#([_\w]+)(\.|->)([_\w]+)';
+my $type_fallback = '(?!)'; # this never matches
my $type_member_func = $type_member . '\(\)';
# Output conversion substitutions.
@@ -1745,6 +1745,9 @@
)+
\)\)\s+//x;
+ # Strip QEMU specific compiler annotations
+ $prototype =~ s/QEMU_[A-Z_]+ +//;
+
# Yes, this truly is vile. We are looking for:
# 1. Return type (may be nothing if we're looking at a macro)
# 2. Function name
@@ -2057,7 +2060,7 @@
}
elsif (/$doc_decl/o) {
$identifier = $1;
- if (/\s*([\w\s]+?)(\(\))?\s*-/) {
+ if (/\s*([\w\s]+?)(\s*-|:)/) {
$identifier = $1;
}
@@ -2067,7 +2070,7 @@
$contents = "";
$section = $section_default;
$new_start_line = $. + 1;
- if (/-(.*)/) {
+ if (/[-:](.*)/) {
# strip leading/trailing/multiple spaces
$descr= $1;
$descr =~ s/^\s*//;
These changes correspond to:
06e2329636 license: Update deprecated SPDX tag GPL-2.0 to GPL-2.0-only
(a bulk change which we won't bother to re-apply to this third-party script)
b30df2751e scripts/kernel-doc: strip QEMU_ from function definitions
4cf4179441 docs: tweak kernel-doc for QEMU coding standards
We have already applied the equivalent of these changes to the
Python code in libs/kdoc/ in the preceding commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This commit makes the equivalent changes to the Python script that we
had for the old Perl script in commit 4cf4179441 ("docs: tweak
kernel-doc for QEMU coding standards"). To repeat the rationale from
that commit:
Surprisingly, QEMU does have a pretty consistent doc comment style and
it is not very different from the Linux kernel's. Of the documentation
"sigils", only "#" separates the QEMU doc comment style from Linux's,
and it has 200+ instances vs. 6 for the kernel's '&struct foo' (all in
accel/tcg/translate-all.c), so it's clear that the two standards are
different in this respect. In addition, our structs are typedefed and
recognized by CamelCase names.
Note that in 4cf4179441 we used '(?!)' as our type_fallback regex;
this is strictly not quite a replacement for the upstream
'\&([_\w]+)', because the latter includes a group that can later be
matched with \1, and the former does not. The old perl script did
not care about this, but the python version does, so we must include
the extra set of brackets to ensure we have a group.
This commit does not include all the same changes that 4cf4179441
did. Of the missing pieces, some had already gone in an earlier
kernel-doc update; the parts we still had but do not include here are:
@@ -2057,7 +2060,7 @@
}
elsif (/$doc_decl/o) {
$identifier = $1;
- if (/\s*([\w\s]+?)(\(\))?\s*-/) {
+ if (/\s*([\w\s]+?)(\s*-|:)/) {
$identifier = $1;
}
@@ -2067,7 +2070,7 @@
$contents = "";
$section = $section_default;
$new_start_line = $. + 1;
- if (/-(.*)/) {
+ if (/[-:](.*)/) {
# strip leading/trailing/multiple spaces
$descr= $1;
$descr =~ s/^\s*//;
The second of these is already in the upstream version: the line r =
KernRe("[-:](.*)") in process_name() matches the regex we have. The
first change has been refactored into the doc_begin_data and
doc_begin_func changes. Since the output HTML for QEMU's
documentation has no relevant changes with the new kerneldoc, we
assume that this too has been handled upstream.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-id: 20250814171324.1614516-6-peter.maydell@linaro.org
