The commit referenced (from QEMU 10.0) has changed the way the pseries
machine marks a cpu as quiesced. Previously, the cpu->halted value
from QEMU common cpu code was (incorrectly) used. With the fix, the
env->quiesced variable starts being used, which improves on the
original situation, but also causes a side effect after migration:
The env->quiesced is set at reset and never migrated, which causes the
destination QEMU to stop delivering interrupts and hang the machine.
To fix the issue from this point on, start migrating the env->quiesced
value.
For QEMU versions < 10.0, sending the new element on the stream would
cause migration to be aborted, so add the appropriate compatibility
property to omit the new subsection.
Independently of this patch, all migrations from QEMU versions < 10.0
would result in a hang since the older QEMU never migrates
env->quiesced. This is bad because it leaves machines already running
on the old QEMU without a migration path into newer versions.
As a workaround, use a few heuristics to infer the new value of
env->quiesced based on cpu->halted, LPCR and PSSCR bits that are
usually set/cleared along with quiesced.
Note that this was tested with -cpu power9 and -machine ic-mode=xive
due to another bug affecting migration of XICS guests. Tested both
forward and backward migration and savevm/loadvm from 9.2 and 10.0.
Also tested loadvm of a savevm image that contains a mix of cpus both
halted and not halted.
Reported-by: Fabian Vogt <fvogt@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3079
Fixes: fb802acdc8 ("ppc/spapr: Fix RTAS stopped state")
Acked-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20260109123519.28703-2-farosas@suse.de
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
(cherry picked from commit 628bda1ab7596a7cceb1c5356d23a92001c7a8c5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is currently no machine in QEMU (except the "none" machine)
that can be run with with one of the e200 ppc CPUs - all machines
either complain about an invalid CPU type or crash QEMU immediately.
Looking at the history of this CPU type, it seems like it has never
been used in QEMU and only implemented as a placeholder (see e.g. the
comment about unimplemented instructions in the POWERPC_FAMILY(e200)
section of cpu_init.c). Being completely unused and unusable since
such a long time, let's just remove it now (without deprecation phase,
since there were no users of this dead code anyway).
Note: The init_excp_e200() is used by the e500 CPUs, too, so we
rename this function to init_excp_e500() instead of removing it.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20251024065726.738005-3-thuth@redhat.com
Message-ID: <20251024065726.738005-3-thuth@redhat.com>
The next commit is going to remove init_proc_e200(), which is one of
the two calling sites of register_BookE206_sprs(). This causes recent
versions of GCC to inline the register_BookE206_sprs() function into
the other only remaining calling site, init_proc_e500(), which in
turn causes some false-positives compiler warnings:
In file included from ../../devel/qemu/target/ppc/cpu_init.c:46:
In function ‘register_BookE206_sprs’,
inlined from ‘init_proc_e500’ at ../../devel/qemu/target/ppc/cpu_init.c:2910:5:
../../devel/qemu/target/ppc/cpu_init.c:897:29: error:
array subscript 3 is outside array bounds of ‘uint32_t[2]’ {aka ‘unsigned int[2]’}
[-Werror=array-bounds=]
897 | tlbncfg[3]);
| ~~~~~~~^~~
../../devel/qemu/target/ppc/spr_common.h:61:39: note: in definition of macro ‘spr_register_kvm_hv’
61 | KVM_ARG(one_reg_id) initial_value)
| ^~~~~~~~~~~~~
../../devel/qemu/target/ppc/spr_common.h:77:5: note: in expansion of macro ‘spr_register_kvm’
77 | spr_register_kvm(env, num, name, uea_read, uea_write, \
| ^~~~~~~~~~~~~~~~
../../devel/qemu/target/ppc/cpu_init.c:894:9: note: in expansion of macro ‘spr_register’
894 | spr_register(env, SPR_BOOKE_TLB3CFG, "TLB3CFG",
| ^~~~~~~~~~~~
../../devel/qemu/target/ppc/cpu_init.c: In function ‘init_proc_e500’:
../../devel/qemu/target/ppc/cpu_init.c:2809:14: note: at offset 12 into object ‘tlbncfg’ of size 8
2809 | uint32_t tlbncfg[2];
| ^~~~~~~
cc1: all warnings being treated as errors
init_proc_e500() only defines "uint32_t tlbncfg[2];", but it is OK since
it also sets "env->nb_ways = 2", so the code that GCC warns about in
register_BookE206_sprs() is never reached. Unfortunately, GCC is not smart
enough to see this, so it emits these warnings.
To fix it, let's simplify the code in register_BookE206_sprs() a little
bit to set up the SPRs in a loop, so we don't reference the tlbncfg[3]
entry directly anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20251024065726.738005-2-thuth@redhat.com
Message-ID: <20251024065726.738005-2-thuth@redhat.com>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for Power PC targets.
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-22-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
tcg_gen_goto_tb() takes an unsigned index to the TB slot (0 or 1).
Declare the argument as unsigned and rename it as @tb_slot_idx
(which is more descriptive than @n) on all targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20251010031745.37528-1-philmd@linaro.org>
Join the 3 KVM_PUT_*_STATE definitions in a single enum.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20251008040715.81513-3-philmd@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In gen_mcrfs() the FPSCR nibble mask is computed as:
`~((0xF << shift) & FP_EX_CLEAR_BITS)`
Here, 0xF is of type int, so the left shift is performed in
32-bit signed arithmetic. For bfa=0 we get shift=28,
and (0xF << 28) = 0xF0000000, which is not representable as a 32-bit
signed int. Static analyzers flag this as a potential integer
overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Sergeev <zeff@altlinux.org>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250915080118.29898-1-zeff@altlinux.org
Message-ID: <20250915080118.29898-1-zeff@altlinux.org>
Power8E and Power8NVL variants are not of much use in QEMU now, and not
being maintained either.
Power8NVL CPU doesn't boot since skiboot v7.0, or following skiboot commit
to be exact:
commit c5424f683ee3 ("Remove support for POWER8 DD1")
Deprecate the 8E and 8NVL variants.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250607110412.2342511-3-adityag@linux.ibm.com
Message-ID: <20250607110412.2342511-3-adityag@linux.ibm.com>
QEMU has a way to deprecate CPUs by setting the 'deprecation_note' in
CPUClass.
Currently PowerPC CPUs don't use this deprecation process.
Introduce 'POWERPC_DEPRECATED_CPU' macro to deprecate particular PowerPC
CPUs in future.
With the change, QEMU will print a warning like below when the
deprecated CPU/Chips are used (example output if power8nvl is deprecated):
$ ./build/qemu-system-ppc64 -M powernv8 --cpu power8nvl -nographic
qemu-system-ppc64: warning: CPU model power8nvl_v1.0-powerpc64-cpu is deprecated -- CPU is unmaintained.
...
Also, print '(deprecated)' for deprecated CPUs in 'qemu-system-ppc64
--cpu ?' (example output if power8nvl is deprecated):
$ ./build/qemu-system-ppc64 --cpu help
...
power8e (alias for power8e_v2.1)
power8nvl_v1.0 PVR 004c0100 (deprecated)
power8nvl (alias for power8nvl_v1.0)
power8_v2.0 PVR 004d0200
...
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250607110412.2342511-2-adityag@linux.ibm.com
Message-ID: <20250607110412.2342511-2-adityag@linux.ibm.com>
Move below instructions to decodetree specification:
fcpsgn, fmrg{e, o}w : X-form
The changes were verified by validating that the tcg ops generated by
those instructions remain the same, which were captured with the '-d
in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250619095840.369351-5-rathc@linux.ibm.com
Message-ID: <20250619095840.369351-5-rathc@linux.ibm.com>
Move below instructions to decodetree specification:
f{mr, neg, abs, nabs} : X-form
The changes were verified by validating that the tcg ops generated by
those instructions remain the same, which were captured with the '-d
in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250619095840.369351-4-rathc@linux.ibm.com
Message-ID: <20250619095840.369351-4-rathc@linux.ibm.com>
Move below instructions to decodetree specification :
fcmp{u, o} : X-form
The changes were verified by validating that the tcg ops generated by
those instructions remain the same, which were captured with the '-d
in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250619095840.369351-3-rathc@linux.ibm.com
Message-ID: <20250619095840.369351-3-rathc@linux.ibm.com>
Move below instructions to decodetree specification :
fr{sp, in, iz, im}[s][.],
fcti{w, d}[u, z, uz][s][.],
fcfid[s, u, us][s][.] : X-form
The changes were verified by validating that the tcg ops generated by
those instructions remain the same, which were captured with the '-d
in_asm,op' flag.
Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250619095840.369351-2-rathc@linux.ibm.com
Message-ID: <20250619095840.369351-2-rathc@linux.ibm.com>
The IBM PPE42 processor only supports real mode
addressing and does not distinguish between
problem and supervisor states. It also uses
the IR and DR MSR bits for other purposes.
Therefore, add a check for PPE42 when we update
hflags and cause it to ignore the IR and DR bits
when calculating MMU indexes.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-6-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-6-milesg@linux.ibm.com>
Add support for the IBM PPE42 exception model including
new exception vectors, exception priorities and setting
of PPE42 SPRs for determining the cause of an exception.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-5-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-5-milesg@linux.ibm.com>
Introduces flags and register definitions needed
for the IBM PPE42 exception model.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-4-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-4-milesg@linux.ibm.com>
Adds the IBM PPE42 family of 32-bit processors supporting
the PPE42, PPE42X and PPE42XM processor versions. These
processors are used as embedded processors in the IBM
Power9, Power10 and Power12 processors for various
tasks. It is basically a stripped down version of the
IBM PowerPC 405 processor, with some added instructions
for handling 64-bit loads and stores.
For more information on the PPE 42 processor please visit:
https://wiki.raptorcs.com/w/images/a/a3/PPE_42X_Core_Users_Manual.pdf
Supports PPE42 SPR's (Including the MSR).
Does not yet support exceptions, new PPE42 instructions and
does not prevent access to some invalid instructions and
registers (currently allows access to invalid GPR's and CR
fields).
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Chinmay Rath <rathc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-3-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-3-milesg@linux.ibm.com>
It is not used by user-mode emulation and is the only caller of
cpu_interrupt() in qemu-ppc* binaries.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently when CONFIG_POWERNV is not enabled, the build fails, such as
with --without-default-devices:
$ ./configure --without-default-devices
$ make
[281/283] Linking target qemu-system-ppc64
FAILED: qemu-system-ppc64
cc -m64 @qemu-system-ppc64.rsp
/usr/bin/ld: libqemu-ppc64-softmmu.a.p/target_ppc_misc_helper.c.o: in function `helper_load_sprd':
.../target/ppc/misc_helper.c:335:(.text+0xcdc): undefined reference to `pnv_chip_find_core'
/usr/bin/ld: libqemu-ppc64-softmmu.a.p/target_ppc_misc_helper.c.o: in function `helper_store_sprd':
.../target/ppc/misc_helper.c:375:(.text+0xdf4): undefined reference to `pnv_chip_find_core'
collect2: error: ld returned 1 exit status
...
This is since target/ppc/misc_helper.c references PowerNV specific
'pnv_chip_find_core' call.
Split the PowerNV specific SPRD code out of the generic PowerPC code, by
moving the SPRD code to pnv.c
Fixes: 9808ce6d5c ("target/ppc: Big-core scratch register fix")
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250820122516.949766-2-adityag@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
kvmppc_load_htab_chunk() is used for migration, thus is not
a hot path. Use the heap instead of the stack, removing the
alloca() call.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20250901132626.28639-2-philmd@linaro.org>
The helpers form load-acquire/store-release pair and ensure
that appropriate barriers are in place in case checks happen
outside of BQL.
Use them to replace open-coded checkers/setters across the code,
to make sure that barriers are not missed. Helpers also make code a
bit more readable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821155603.2422553-1-imammedo@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict "exec/tswap.h" to the tswap*() methods,
move the load/store helpers with the other ones
declared in "qemu/bswap.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
=XmkU
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: Intel TDX support
* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
# ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
# Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
# A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
# BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
# Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
# =XmkU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 May 2025 03:05:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (77 commits)
target/i386/tcg/helper-tcg: fix file references in comments
target/i386: Add support for EPYC-Turin model
target/i386: Update EPYC-Genoa for Cache property, perfmon-v2, RAS and SVM feature bits
target/i386: Add couple of feature bits in CPUID_Fn80000021_EAX
target/i386: Update EPYC-Milan CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC-Rome CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC CPU model for Cache property, RAS, SVM feature bits
rust: make declaration of dependent crates more consistent
docs: Add TDX documentation
i386/tdx: Validate phys_bits against host value
i386/tdx: Make invtsc default on
i386/tdx: Don't treat SYSCALL as unavailable
i386/tdx: Fetch and validate CPUID of TD guest
target/i386: Print CPUID subleaf info for unsupported feature
i386: Remove unused parameter "uint32_t bit" in feature_word_description()
i386/cgs: Introduce x86_confidential_guest_check_features()
i386/tdx: Define supported KVM features for TDX
i386/tdx: Add XFD to supported bit of TDX
i386/tdx: Add supported CPUID bits relates to XFAM
i386/tdx: Add supported CPUID bits related to TD Attributes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce kvm_arch_pre_create_vcpu(), to perform arch-dependent
work prior to create any vcpu. This is for i386 TDX because it needs
call TDX_INIT_VM before creating any vcpu.
The specific implementation for i386 will be added in the future patch.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250508150002.689633-8-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the TARGET_* conditions from all the CPU commands
that are conceptually target independent. Top level stubs are
provided to cope with targets which do not currently implement
all of the commands. Adjust the doc comments accordingly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-10-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Check 32 vs 64-bit state.
Cc: qemu-ppc@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On Emscripten, function pointer casts can result in runtime failures due to
strict function signature checks. This affects the use of g_list_sort and
g_slist_sort, which internally perform function pointer casts that are not
supported by Emscripten. To avoid these issues, g_list_sort_with_data and
g_slist_sort_with_data should be used instead, as they do not rely on
function pointer casting.
Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Link: https://lore.kernel.org/r/d917055d35f5ff7316ccdcbdf57af9a7bd85bf29.1745820062.git.ktokunaga.mail@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move set_helper_retaddr and clear_helper_retaddr
to a new header file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the global function name to a hook on TCGCPUOps.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine 3 different pointer returns into one structure return.
Include a cflags field in TCGTBCPUState, not filled in by
cpu_get_tb_cpu_state, but used by all callers. This fills
a hole in the structure and is useful in some subroutines.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For some targets, simply remove the local definition.
For other targets, move the inline definition out of line.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize all instances with cpu_reset(), so that there
is no functional change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
Declare probe methods in "accel/tcg/probe.h" to emphasize
they are specific to TCG accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-13-philmd@linaro.org>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 62b4a227a3 the default cpu type can come from the
valid_cpu_types[] array. Call the machine_class_default_cpu_type()
instead of accessing MachineClass::default_cpu_type field.
Cc: qemu-stable@nongnu.org
Fixes: 62b4a227a3 ("hw/core: Add machine_class_default_cpu_type()")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250422084114.39499-1-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Register ppc_cpu_list() as CPUClass:list_cpus callback.
Reduce its scope and remove the cpu_list definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250324185837.46506-4-philmd@linaro.org>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Instead of having a compile-time TARGET_SUPPORTS_MTTCG definition,
have each target set the 'mttcg_supported' field in the TCGCPUOps
structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250405161320.76854-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By directly using TCGCPUOps::guest_default_memory_order,
we don't need the TCG_GUEST_DEFAULT_MO definition anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
