We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places the hook for MicroBlaze targets. This architecture
has one special "exception" for interrupts and no host calls.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Break out raise_divzero() and take the opportunity to rename
and reorder function args to better match with spec and
pseudo code.
No functional change.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove unused arg from check_divz(). No functional change.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CPUMBState::@res_addr field is used as u32 since commit
cfeea807e5 ("target-microblaze: Tighten up TCGv_i32 vs
TCGv type usage"). Convert it as such, bumping the migration
version. Use the RES_ADDR_NONE definition when appropriate.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-8-philmd@linaro.org>
All callers of do_load() and do_store() pass a TCGv_i32 address
type, have both functions take a TCGv_i32.
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-7-philmd@linaro.org>
Both compute_ldst_addr_typea() and compute_ldst_addr_typeb()
bodies use a TCGv_i32, so return the same type.
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-6-philmd@linaro.org>
Since commit 36a9529e60 ("target/microblaze: Simplify
compute_ldst_addr_type{a,b}"), helper_stackprot() takes
a TCGv_i32 argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-5-philmd@linaro.org>
translator_use_goto_tb() expects a vaddr type since commit
b1c09220b4 ("accel/tcg: Replace target_ulong with vaddr in
translator_*()").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-4-philmd@linaro.org>
The CPUClass::get_phys_page_debug() handler takes a 'vaddr' address
and return a 'hwaddr' type since commit 00b941e581 ("cpu: Turn
cpu_get_phys_page_debug() into a CPUClass hook").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-3-philmd@linaro.org>
cpu_handle_mmu_fault() -- renamed in commit f429d607c7 -- expects
a vaddr type for its address argument since commit 7510454e3e
("cpu: Turn cpu_handle_mmu_fault() into a CPUClass hook").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20251015180115.97493-2-philmd@linaro.org>
tcg_gen_goto_tb() takes an unsigned index to the TB slot (0 or 1).
Declare the argument as unsigned and rename it as @tb_slot_idx
(which is more descriptive than @n) on all targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20251010031745.37528-1-philmd@linaro.org>
The helpers form load-acquire/store-release pair and ensure
that appropriate barriers are in place in case checks happen
outside of BQL.
Use them to replace open-coded checkers/setters across the code,
to make sure that barriers are not missed. Helpers also make code a
bit more readable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821155603.2422553-1-imammedo@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
M68K, MicroBlaze, OpenRISC, RX, TriCore and Xtensa are
all 32-bit targets. AVR is more complicated, but using
a 32-bit wrap preserves current behaviour.
Cc: Michael Rolnik <mrolnik@gmail.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Tested-by Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Require TCGv_i32 and TCGv be identical, so drop
the extensions. Return constants when possible
instead of a mov into a temporary. Return register
inputs unchanged when possible.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return a constant 0 from reg_for_read, and a new
temporary from reg_for_write.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use TARGET_FMT_lx to match the target_ulong type of vaddr.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an explicit 64-bit type for extended addresses.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an explicit 64-bit type for EAR.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use helpers and address_space_ld/st instead of inline
loads and stores. This allows us to perform operations
on physical addresses wider than virtual addresses.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an explicit 64-bit type for the address to store in EAR.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an explicit 64-bit type for the address to store in EAR.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the microblaze code calls gdb_register_coprocessor() in its
initfn. This works, but we would like to delay setting up GDB
registers until realize. All other target architectures only call
gdb_register_coprocessor() in realize, after the call to
cpu_exec_realizefn().
Move the microblaze gdb_register_coprocessor() use, bringing it
in line with other targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250429132200.605611-3-peter.maydell@linaro.org
We're about to make a change that removes the only other use
of the 'cpu' local variable in mb_cpu_initfn(); since the
DEVICE() casts work fine with the Object*, use that instead,
so that we can remove the local variable when we make the
following change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250429132200.605611-2-peter.maydell@linaro.org
VMSTATE_CPU() is only used in 4 places and doesn't provide
much, directly inline it using VMSTATE_STRUCT().
This removes the last COMPILING_PER_TARGET in "hw/core/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250429085148.11876-1-philmd@linaro.org>
Move the global function name to a hook on TCGCPUOps.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine 3 different pointer returns into one structure return.
Include a cflags field in TCGTBCPUState, not filled in by
cpu_get_tb_cpu_state, but used by all callers. This fills
a hole in the structure and is useful in some subroutines.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For some targets, simply remove the local definition.
For other targets, move the inline definition out of line.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize all instances with cpu_reset(), so that there
is no functional change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
Use this in gen_addc and gen_rsubc, both of which need
add with carry-in and carry-out.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Instead of having a compile-time TARGET_SUPPORTS_MTTCG definition,
have each target set the 'mttcg_supported' field in the TCGCPUOps
structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250405161320.76854-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By directly using TCGCPUOps::guest_default_memory_order,
we don't need the TCG_GUEST_DEFAULT_MO definition anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the TCGCPUOps::guest_default_memory_order field and have
each target initialize it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To avoid including the huge "cpu.h" for a simple definition,
move TARGET_INSN_START_EXTRA_WORDS to "cpu-param.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250401080938.32278-13-philmd@linaro.org>
The implementation of cpu_mmu_index was split between cpu-common.h
and cpu-all.h, depending on CONFIG_USER_ONLY. We already have the
plumbing common to user and system mode. Using MMU_USER_IDX
requires the cpu.h for a specific target, and so is restricted to
when we're compiling per-target.
Include the new header only where needed.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-13-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-17-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-5-philmd@linaro.org>
Consider the CPU ENDI bit, swap instructions when the CPU
endianness doesn't match the binary one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241105130431.22564-17-philmd@linaro.org>
