IP protocols should not be printed unless the socket is an IPv4 or
IPv6 one. Current arrangement erroneously prints IPPROTO_IP for Unix
domain sockets.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250827095412.2348821-1-l.stelmach@samsung.com>
All targets have been converted, so we can call init_main_thread
directly. Remove do_init_main_thread and HAVE_INIT_MAIN_THREAD.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Note that init_thread had set ps in target_pt_regs, but
target_cpu_copy_regs did not copy to env. This turns out to be
ok because alpha_cpu_initfn initializes flags properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Note that init_thread had set cp0_status in target_pt_regs, but
target_cpu_copy_regs did not copy to env. This turns out to be
ok because mips_cpu_reset_hold initializes CP0_Status properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Note that init_thread had set crmd in target_pt_regs, but
target_cpu_copy_regs did not copy to env. This turns out to be
ok because loongarch_cpu_reset_hold initializes CRMD properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The setting of r1/r2 was removed in kernel commit acfdd4b1f7590d0
("ARM: 7791/1: a.out: remove partial a.out support"), and the
kernel commit message explains the history.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge init_thread and target_cpu_copy_regs.
There's no point going through a target_pt_regs intermediate.
Temporarily introduce HAVE_INIT_MAIN_THREAD during conversion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provide a unified function to initialize the main thread.
Keep target_pt_regs isolated to this function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used by bsd-user, so placement
within include/user/cpu_loop.h is not ideal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass in CPUState; define HAVE_ELF_BASE_PLATFORM.
Since this was the only instance of ELF_BASE_PLATFORM, go ahead and
provide the stub definition for other platforms.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All real definitions of ELF_PLATFORM are now identical, and the stub
definitions are NULL. Use HAVE_ELF_PLATFORM and provide a stub as a
fallback definition of get_elf_platform.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the string literal to a new function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the string literal to a new function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the aarch32 get_elf_platform to arm/elfload.c; pass in CPUState.
Create a simple version in aarch64/elfload.c, which we must do at the
same time because of the ifdef dependency between TARGET_AARCH64
and TARGET_ARM.
Since all versions of get_elf_platform now have the same
signature, remove the ifdef from the declaration in loader.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than modify a static buffer, index into an array of const data.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move get_elf_platform to i386/elfload.c; pass in CPUState.
Create a simple get_elf_platform for x86_64.
Introduce HAVE_ELF_PLATFORM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All definitions of ELF_HWCAP2 are now identical. Provide a
not-reached stub as a fallback definition of get_elf_hwcap2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All real definitions of ELF_HWCAP are now identical, and the stub
definitions are 0. Provide zero stub as a fallback definition.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
As this is the last instance of get_elf_hwcap to be converted,
remove the ifdef around the declaration in loader.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For get_elf_hwcap, change the return type to abi_ulong
and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For get_elf_hwcap and get_elf_hwcap2, change the return type to
abi_ulong, and pass in the cpu. We must do these targets at the
same time because of the ifdef dependency between TARGET_AARCH64
and TARGET_ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return type to abi_ulong, and pass in the cpu.
Duplicate the one line function between i386 and x86_64,
as most other additions to elfload.c won't be common.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename from cpu_get_model to emphasize that this is an elf-specific
function. Declare the function once in loader.h.
This frees up target_elf.h for other uses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the workaround out of linux-user/elfload.c, so that
we don't have to replicate it in many places. Place it
immediately after the include of <signal.h>, which draws
in the relevant symbols.
Note that ARCH_DLINFO is not defined by the kernel header,
and so there's no need to undef it either.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare to split the main linux-user/elfload.c.
Create empty files for each target, and add the common build rule.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While semihosting isn't really thread aware, the current
implementation allocates space for the heap per-thread.
Remove the heap_base and heap_limit fields from TaskState.
Replace with static variables within do_common_semihosting.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the write-once field TaskState.stack_base, and use the
same value from struct image_info.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're missing a strace entry for riscv_hwprobe, and using -strace will
report it as "Unknown syscall 258".
After this patch we'll have:
$ ./build/qemu-riscv64 -strace test_mutex_riscv
110182 riscv_hwprobe(0x7f207efdc700,1,0,0,0,0) = 0
110182 brk(NULL) = 0x0000000000082000
(...)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250728170633.113384-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
FEAT_SME2 adds the ZT0 register, whose contents may need to be
preserved and restored on signal handler entry and exit. This is
done with a new ZT_MAGIC record. We forgot to implement support for
this in our linux-user code before enabling the SME2p1 emulation,
which meant that a signal handler using SME would corrupt the ZT0
register value, and code that attempted to unwind an exception from
inside a signal handler would not work.
Add the missing record handling.
Fixes: 7b1613a102 ("target/arm: Enable FEAT_SME2p1 on -cpu max")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250725175510.3864231-4-peter.maydell@linaro.org>
FEAT_SME adds the TPIDR2 userspace-accessible system register, which
is used as part of the procedure calling standard's lazy saving
scheme for the ZA registers:
https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst#66the-za-lazy-saving-scheme
The Linux kernel has a signal frame record for saving
and restoring this value when calling signal handlers, but
we forgot to implement this. The result is that code which
tries to unwind an exception out of a signal handler will
not work correctly.
Add support for the missing record.
Cc: qemu-stable@nongnu.org
Fixes: 78011586b9 ("target/arm: Enable SME for user-only")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250725175510.3864231-3-peter.maydell@linaro.org>
A recent change to the kernel (Linux commit b376108e1f88
"arm64/fpsimd: signal: Clear TPIDR2 when delivering signals") updated
the signal-handler entry code to always clear TPIDR2_EL0.
This is necessary for the userspace ZA lazy saving scheme to work
correctly when unwinding exceptions across a signal boundary.
(For the essay-length description of the incorrect behaviour and
why this is the correct fix, see the commit message for the
kernel commit.)
Make QEMU also clear TPIDR2_EL0 on signal entry, applying the
equivalent bugfix to our implementation.
Note that getting this unwinding to work correctly also requires
changes to the userspace code, e.g. as implemented in gcc in
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=b5ffc8e75a8
This change is technically an ABI change; from the kernel's
point of view SME was never enabled (it was hidden behind
CONFIG_BROKEN) before the change. From QEMU's point of view
our SME-related signal handling was broken anyway as we weren't
saving and restoring TPIDR2_EL0.
Cc: qemu-stable@nongnu.org
Fixes: 78011586b9 ("target/arm: Enable SME for user-only")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250725175510.3864231-2-peter.maydell@linaro.org>
