We do have a number of test-case for various architectures exercising
their interrupt/exception logic. However, for the recently introduced
trap API we also want to exercise the logic for double traps on at least
one architecture.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-31-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced plugin API for the registration of callbacks for
discontinuity events, specifically for interrupts, exceptions and host
call events. The callback receives various bits of information,
including the VCPU index and PCs.
This change introduces a test plugin asserting the correctness of that
behaviour in cases where this is possible with reasonable effort.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-30-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for xtensa targets.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-29-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places an exception hook for TriCore targets. Interrupts are
not implemented for this target and it has no host calls.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-28-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for SPARC (32bit and 64bit) targets. We treat
any interrupt other than EXTINT and IVEC as exceptions as they appear to
be synchroneous events.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-27-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for SuperH targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <yoshinori.sato@nifty.com>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-26-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for IBM System/390 targets. We treat "program
interrupts" and service calls as exceptions. We treat external and io
"exceptions" as well as resets as interrupts.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-25-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for Renesas Xtreme targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <yoshinori.sato@nifty.com>
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-24-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for RISC-V targets.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-23-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for Power PC targets.
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-22-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for OpenRISC targets. We treat anything other
than resets, timer and device interrupts as exceptions.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-21-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for MIPS targets. We consider the exceptions
NMI and EXT_INTERRUPT to be asynchronous interrupts rather than
exceptions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-20-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places the hook for MicroBlaze targets. This architecture
has one special "exception" for interrupts and no host calls.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for Motorola 68000 targets.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-18-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for loongarch targets. This architecture
has one special "exception" for interrupts and no host calls.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20251027110344.2289945-17-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places the hook for x86 targets.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-16-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We identified a number of exceptions as interrupts, and we assume every
other exception is a (syncroneous) exceptions. PA-RISC appears to not
have any form of host-call.
This change places the hook for PA-RISC targets.
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-15-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places the hook for AVR targets. That architecture appears
to only know interrupts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251027110344.2289945-14-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for ARM (and Aarch64) targets. We decided to
treat the (V)IRQ, (VI/VF)NMI, (V)FIQ and VSERR exceptions as interrupts
since they are, presumably, async in nature.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-13-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced API for registering callbacks for trap related
events as well as the corresponding hook functions. Due to differences
between architectures, the latter need to be called from target specific
code.
This change places hooks for Alpha targets.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-12-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We recently introduced new plugin API for registration of discontinuity
related callbacks. This change introduces a minimal plugin showcasing
the new API. It simply counts the occurances of interrupts, exceptions
and host calls per CPU and reports the counts when exitting.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-11-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The plugin API allows registration of callbacks for a variety of VCPU
related events, such as VCPU reset, idle and resume. In addition, we
recently introduced API for registering callbacks for discontinuity
events, specifically for interrupts, exceptions and host calls.
This change introduces the corresponding hooks called from target
specific code inside qemu.
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-10-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The plugin API allows registration of callbacks for a variety of VCPU
related events, such as VCPU reset, idle and resume. In addition to
those events, we recently defined discontinuity events, which include
traps.
This change introduces a function to register callbacks for these
events. We define one distinct plugin event type for each type of
discontinuity, granting fine control to plugins in term of which events
they receive.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-9-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The plugin API allows registration of callbacks for a variety of VCPU
related events, such as VCPU reset, idle and resume. However, traps of
any kind, i.e. interrupts or exceptions, were previously not covered.
These kinds of events are arguably quite significant and usually go hand
in hand with a PC discontinuity. On most platforms, the discontinuity
also includes a transition from some "mode" to another. Thus, plugins
for the analysis of (virtualized) embedded systems may benefit from or
even require the possiblity to perform work on the occurance of an
interrupt or exception.
This change introduces the concept of such a discontinuity event in the
form of an enumeration. Currently only traps are covered. Specifically
we (loosely) define interrupts, exceptions and host calls across all
platforms. In addition, this change introduces a type to use for
callback functions related to such events. Since possible modes and the
enumeration of interupts and exceptions vary greatly between different
architectures, the callback type only receives the VCPU id, the type of
event as well as the old and new PC.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Julian Ganz <neither@nut.email>
Message-ID: <20251027110344.2289945-8-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Both Debian and Ubuntu are setup the same way.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20251027110344.2289945-7-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Unlike the Aarch64 runners this comes with pure Debian out of the box.
We need a minor tweak to build-environment to deal with the
differences in naming convention.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20251027110344.2289945-6-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
There is no practical difference between the systems when it comes to
updating the installed system.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20251027110344.2289945-5-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We can share the setup of the build environment with multiple
operating systems as we just need to check the YAML for each env is
present in the directory structure.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20251027110344.2289945-4-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We inadvertently updated the base libvirt-ci project which has
resulted in changes. Make sure the output matches what we generate.
Fixes: 0d4fb8f746 (configure: set the bindgen cross target)
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20251027110344.2289945-3-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We no longer need to support 32 bit builds and we missed this while
cleaning up.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20251027110344.2289945-2-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* esp: fix esp_cdb_ready() FIFO wraparound limit calculation
* isapc: warn rather than reject modern x86 CPU models
* mshv: fix Coverity issues
* qdev: Change PropertyInfo method print() to return malloc'ed string
* qobject: make refcount atomic
* rcu: make synchronize_rcu() more efficient
* rust: cleanup glib_sys bindings
* rust: Convert bit value to u8 within #[property]
* rust: only leave leaf crates as workspace members
* scripts: clean up meson-buildoptions.py
* scsi: make refcount atomic
* target/i386: Init SMM cpu address space for hotplugged CPUs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkB3UUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrRAgAidqHD3mBOEPhcz3Xh5xuJGd+fFnr
wD5/zi5DPy2ZmPKY/buMv/92R6GKKQwZVJrKKdj2+yXFayp0LZNs+ZXNhOl8+EWT
uZayJJt1Wx5E8BB31NKDBLSnvIjVnP+0QDN3pn7ihoIYtdy7ziUd2sS955z+42Vx
ewLwZMfIodSykYfeUsjA7A4GgXtHZWv1bGOZ4qVX/Bgr06efKui3WUaVAkN6i6T+
WJBn4Wb3fBiHLhmFzdIxB91hZjyP9athOQb5kiTL1g+2uYsuQPSfWRhqfgy3EWGf
K72bpnxnMSzhjz0YXKz5S5kjpe/3g7OCiPJm0Jf5Aq7KqGyIkUSSdgo59Q==
=KCqH
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* char: rename CharBackend->CharFrontend
* esp: fix esp_cdb_ready() FIFO wraparound limit calculation
* isapc: warn rather than reject modern x86 CPU models
* mshv: fix Coverity issues
* qdev: Change PropertyInfo method print() to return malloc'ed string
* qobject: make refcount atomic
* rcu: make synchronize_rcu() more efficient
* rust: cleanup glib_sys bindings
* rust: Convert bit value to u8 within #[property]
* rust: only leave leaf crates as workspace members
* scripts: clean up meson-buildoptions.py
* scsi: make refcount atomic
* target/i386: Init SMM cpu address space for hotplugged CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkB3UUUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrRAgAidqHD3mBOEPhcz3Xh5xuJGd+fFnr
# wD5/zi5DPy2ZmPKY/buMv/92R6GKKQwZVJrKKdj2+yXFayp0LZNs+ZXNhOl8+EWT
# uZayJJt1Wx5E8BB31NKDBLSnvIjVnP+0QDN3pn7ihoIYtdy7ziUd2sS955z+42Vx
# ewLwZMfIodSykYfeUsjA7A4GgXtHZWv1bGOZ4qVX/Bgr06efKui3WUaVAkN6i6T+
# WJBn4Wb3fBiHLhmFzdIxB91hZjyP9athOQb5kiTL1g+2uYsuQPSfWRhqfgy3EWGf
# K72bpnxnMSzhjz0YXKz5S5kjpe/3g7OCiPJm0Jf5Aq7KqGyIkUSSdgo59Q==
# =KCqH
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Oct 2025 10:24:21 AM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
rust: migration: allow passing ParentField<> to vmstate_of!
target/i386: clear CPU_INTERRUPT_SIPI for all accelerators
docs/about/deprecated.rst: document isapc deprecation for modern x86 CPU models
hw/i386/isapc.c: warn rather than reject modern x86 CPU models
qdev: Change PropertyInfo method print() to return malloc'ed string
scsi: make SCSIRequest refcount atomic
rust/qemu-macros: Convert bit value to u8 within #[property]
qtest/am53c974-test: add additional test for cmdfifo overflow
esp.c: fix esp_cdb_ready() FIFO wraparound limit calculation
accel/mshv: use return value of handle_pio_str_read
accel/mshv: initialize thread name
char: rename CharBackend->CharFrontend
qobject: make refcount atomic
rust: only leave leaf crates as workspace members
rust: remove useless glib_sys bindings
rcu: Unify force quiescent state
i386/kvm/cpu: Init SMM cpu address space for hotplugged CPUs
scripts: clean up meson-buildoptions.py
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The common superclass for devices could have its own migration state;
for it to be included in the subclass's VMState, ParentField<> must
implement the VMState trait.
Reported-by: Chen Miao <chenmiao@openatom.club>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both the FIBMAP and FIGETBSZ ioctl get "int *" (pointer to 32bit
integer) as argument, not "long *" as specified in qemu. Using the
correct type makes the emulation work in cross endian context.
Both ioctl does not seem to be documented. However the kernel
implementation has always used "int *".
Signed-off-by: Bastian Blank <waldi@debian.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3185
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviwed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix a typo in the title of the sriov.rst document.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove a left-over from the time when this test was still an
avocado-based test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a new paragraph in the "Backwards compatibility" section documenting that
using modern x86 CPU models with the isapc machine is deprecated, and will be
rejected in a future release.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20251023142926.964718-3-mark.caveayland@nutanix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e1e2909f8e ("hw/i386/pc_piix.c: restrict isapc machine to 32-bit CPUs")
restricted the isapc machine to 32-bit CPUs, but subsequent concern has been
expressed as to the effect this could have on users.
The outcome of the latest discussion is that we should exercise more caution
and follow the official deprecation route, so instead of rejecting modern x86
CPUs issue a deprecation warning but allow the user to continue.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20251023142926.964718-2-mark.caveayland@nutanix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simpler (more so after the next commit), and no risk of truncation
because the caller's buffer is too small. Performance doesn't matter;
the method is only used for "info qdev".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20251022101420.36059-2-armbru@redhat.com
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For bit property, make the type conversion within the #[property] macro
so that users do not need to handle the conversion.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20251024041344.1389488-1-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original calculation in commit 3cc70889a3 ("esp.c: prevent cmdfifo overflow
in esp_cdb_ready()") subtracted cmdfifo_cdb_offset from fifo8_num_used() to
calculate the outstanding cmdfifo length, but this is incorrect because
fifo8_num_used() can also include wraparound data.
Instead calculate the maximum offset used by scsi_cdb_length() which is just
the first byte after cmdfifo_cdb_offset, and then peek the entire content
of the cmdfifo. The fifo8_peek_bufptr() result will then return the maximum
length of remaining data up to the end of the internal cmdfifo array, which
can then be used for the overflow check.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 3cc70889a3 ("esp.c: prevent cmdfifo overflow in esp_cdb_ready()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3082
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20250925122846.527615-2-mark.cave-ayland@ilande.co.uk
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains because we assign to ret here but
then never read it again before we overwrite it with
the call to set_x64_registers().
Analyzed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initialization was dropped when the code was copied from existing
accelerators. Coverity knows (CID 1641400). Fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The actual backend is "Chardev", CharBackend is the frontend side of
it (whatever talks to the backend), let's rename it for readability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Link: https://lore.kernel.org/r/20251022074612.1258413-1-marcandre.lureau@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix incorrect key binding for resetting the graphical frontends scaling
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Fixes: 15421f7113 "ui/sdl2: fix reset scaling binding to be consistent with gtk"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It was deprecated in 9.2, time to remove.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
