The group interrupt delivery flow selects the group backlog scan if
LSMFB < IPB, but that scan may find an interrupt with a priority >=
IPB. In that case, the VP-direct interrupt should be chosen. This
extends to selecting the lowest prio between POOL and PHYS rings.
Implement this just by re-starting the selection logic if the
backlog irq was not found or priority did not match LSMFB (LSMFB
is updated so next time around it would see the right value and
not loop infinitely).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-13-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Group interrupts should not be taken from the backlog and presented
if they are precluded by CPPR.
Fixes: 855434b3b8 ("ppc/xive2: Process group backlog when pushing an OS context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-12-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the XIVE spec, updating the CPPR should also update the
PIPR. The final value of the PIPR depends on other factors, but it
should never be set to a value that is above the CPPR.
Also added support for redistributing an active group interrupt when it
is precluded as a result of changing the CPPR value.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-11-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A problem was seen where uart interrupts would be lost resulting in the
console hanging. Traces showed that a lower priority interrupt was
preempting a higher priority interrupt, which would result in the higher
priority interrupt never being handled.
The new interrupt's priority was being compared against the CPPR
(Current Processor Priority Register) instead of the PIPR (Post
Interrupt Priority Register), as was required by the XIVE spec.
This allowed for a window between raising an interrupt and ACK'ing
the interrupt where a lower priority interrupt could slip in.
Fixes: 26c55b9941 ("ppc/xive2: Process group backlog when updating the CPPR")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-10-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The current xive algorithm for finding a matching group vCPU
target always uses the first vCPU found. And, since it always
starts the search with thread 0 of a core, thread 0 is almost
always used to handle group interrupts. This can lead to additional
interrupt latency and poor performance for interrupt intensive
work loads.
Changing this to use a simple round-robin algorithm for deciding which
thread number to use when starting a search, which leads to a more
distributed use of threads for handling group interrupts.
[npiggin: Also round-robin among threads, not just cores]
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-9-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the END Event Queue wraps the END EQ Generation bit is flipped and the
Generation Flipped bit is set to one. On a END cache Watch read operation,
the Generation Flipped bit needs to be reset.
While debugging an error modified END not valid error messages to include
the method since all were the same.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-8-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Test that the NSR exception bit field is equal to the pool ring value,
rather than any common bits set, which is more correct (although there
is no practical bug because the LSI NSR type is not implemented and
POOL/PHYS NSR are encoded with exclusive bits).
Fixes: 4c3ccac636 ("pnv/xive: Add special handling for pool targets")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-7-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pushing a context and loading IPB from NVP is defined to merge ('or')
that IPB into the TIMA IPB register. PIPR should therefore be calculated
based on the final IPB value, not just the NVP value.
Fixes: 9d2b6058c5 ("ppc/xive2: Add grouping level to notification")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-6-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In a multi chip environment there will be remote/forwarded VSDs. The check
to find a matching INT controller (XIVE) of the remote block number was
checking the INTs chip number. Block numbers are not tied to a chip number.
The matching remote INT is the one that matches the forwarded VSD address
with VSD types associated MMIO BAR.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-5-npiggin@gmail.com
[ clg: Fixed log format in pnv_xive2_get_remote() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The queue size of an Event Notification Descriptor (END)
is determined by the 'cl' and QsZ fields of the END.
If the cl field is 1, then the queue size (in bytes) will
be the size of a cache line 128B * 2^QsZ and QsZ is limited
to 4. Otherwise, it will be 4096B * 2^QsZ with QsZ limited
to 12.
Fixes: f8a233dedf ("ppc/xive2: Introduce a XIVE2 core framework")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-4-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Commit 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>") added
redundant qemu_mutex_init(&tdx->lock) in tdx_guest_init by mistake.
Fix it by removing the redundant one.
Fixes: 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250717103707.688929-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of host_cpu_max_instance_init() was merged into
host_cpu_instance_init() by commit 29f1ba338b ("target/i386: merge
host_cpu_instance_init() and host_cpu_max_instance_init()"), while the
declaration of it remains in host-cpu.h.
Clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250716063117.602050-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take tdx_guest->lock when injecting the event notification interrupt into
the guest.
Fixes CID 1612364.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 84fe49d94a ("meson: Add optional dependency on IGVM library")
was inconsistent with the contents of meson_options.txt and the one
generated in scripts/meson-buildoptions.sh
Let's regenerate the file in this way to keep them consistent and prevent
future changes from including the spurious diff:
touch meson_options.txt
make update-buildoptions
Fixes: 84fe49d94a ("meson: Add optional dependency on IGVM library")
Cc: roy.hopkins@randomman.co.uk
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20250717131256.157383-1-sgarzare@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In x86_cpu_post_initfn(), the initialization of x86_ext_save_areas[]
marks the unsupported xsave areas based on Host support.
This step must be done before accel_cpu_instance_init(), otherwise,
KVM's assertion on host xsave support would fail:
qemu-system-x86_64: ../target/i386/kvm/kvm-cpu.c:149:
kvm_cpu_xsave_init: Assertion `esa->size == eax' failed.
(on AMD EPYC 7302 16-Core Processor)
Move x86_ext_save_areas[] initialization to .instance_init and place it
before accel_cpu_instance_init().
Fixes: commit 5f158abef4 ("target/i386: move accel_cpu_instance_init to .instance_init")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250717023933.2502109-1-zhao1.liu@intel.com
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM emulates the ARCH_CAPABILITIES on x86 for both Intel and AMD
cpus, although the IA32_ARCH_CAPABILITIES MSR is an Intel-specific
MSR and it makes no sense to emulate it on AMD.
As a consequence, VMs created on AMD with qemu -cpu host and using
KVM will advertise the ARCH_CAPABILITIES feature and provide the
IA32_ARCH_CAPABILITIES MSR. This can cause issues (like Windows BSOD)
as the guest OS might not expect this MSR to exist on such cpus (the
AMD documentation specifies that ARCH_CAPABILITIES feature and MSR
are not defined on the AMD architecture).
A fix was proposed in KVM code, however KVM maintainers don't want to
change this behavior that exists for 6+ years and suggest changes to be
done in QEMU instead. Therefore, hide the bit from "-cpu host":
migration of -cpu host guests is only possible between identical host
kernel and QEMU versions, therefore this is not a problematic breakage.
If a future AMD machine does include the MSR, that would re-expose the
Windows guest bug; but it would not be KVM/QEMU's problem at that
point, as we'd be following a genuine physical CPU impl.
Reported-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The way editable installs work has changed at some point since Fedora 40
was released. Generally, we should be opting to use pyproject.toml
installs (PEP517/518) - but those are not fully supported until v61 of
setuptools, and CentOS Stream 9 ships v53.
Until that time, we can make use of a transitional feature in
pip/setuptools to use "legacy" editable installs, which is enough to fix
"make check-dev" on modern local workstations for now.
By using the environment variable approach to configure pip, we avoid
any problems for older versions of pip that don't recognize this option,
so it's harmless. The config-settings option first appeared in v23 of
pip. editable_mode was first supported by setuptools in v64.
(I'm not currently precisely aware of when the default behavior of '-e'
switched away from 'compat', but it appears to be a joint effect between
setuptools and pip versions.)
Version information for supported build platforms:
distro python3 pip setuptools sphinx
--------------------------------------------------------
centos_stream_9 3.9.23 21.3.1 53.0.0 3.4.3
ubuntu_22_04 3.10.12 22.0.2 59.6.0 4.3.2
** pyproject.toml installs supported as of here **
freebsd 3.11.13 23.3.2 63.1.0 5.3.0
debian_12 3.11.2 23.0.1 66.1.1 5.3.0
ubuntu_24_04 3.12.3 24.0 68.1.2 7.2.6
centos_stream_10 3.12.11 23.3.2 69.0.3 7.2.6
fedora_41 3.13.5 24.2 69.2.0 7.3.7
alpine_3_19 3.11.13 23.3.1 70.3.0 6.2.1
alpine_3_20 3.12.11 24.0 70.3.0 7.2.6
alpine_3_21 3.12.11 24.3.1 70.3.0 8.1.3
ubuntu_24_10 3.12.7 24.2 74.1.2 7.4.7
fedora_42 3.13.5 24.3.1 74.1.3 8.1.3
ubuntu_25_04 3.13.3 25.0 75.8.0 8.1.3
macports 3.13.5 25.1.1 78.1.1 8.2.3
openbsd 3.12.11 25.1.1 79.0.1 8.2.3
alpine_3_22 3.12.11 25.1.1 80.9.0 8.2.3
homebrew 3.13.5 --- 80.9.0 8.2.3
pkgsrc_current 3.12.11 25.1.1 80.9.0 8.2.3
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250715222548.198888-1-jsnow@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
sphinx 5.3.0 fails with Python 3.13.1:
../docs/meson.build:37: WARNING: /home/me/qemu/build/pyvenv/bin/sphinx-build:
Extension error:
Could not import extension sphinx.builders.epub3 (exception: No module named 'imghdr')
../docs/meson.build:39:6: ERROR: Problem encountered: Install a Python 3 version of python-sphinx and the readthedoc theme
Bump sphinx to 6.2.1 and also sphinx_rtd_theme as required for the new
sphinx version.
(jsnow note: this patch bumps the recommended version for Sphinx to
install when it is missing, but allows old versions to be used if they
are present and functional. The version used for building docs on
readthedocs is pinned to the recommended version, 6.2.1.)
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250715212848.171879-2-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a unit test for qom-list-get.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <1752248703-217318-4-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use qom-list-get to speed up the qom-tree command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <1752248703-217318-3-git-send-email-steven.sistare@oracle.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
[Lint picked off to mollify make check-minreqs]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using qom-list and qom-get to get all the nodes and property values in
a QOM tree can take multiple seconds because it requires 1000's of
individual QOM requests. Some managers fetch the entire tree or a
large subset of it when starting a new VM, and this cost is a
substantial fraction of start up time.
Define the qom-list-get command, which fetches all the properties and
values for a list of paths. This can be much faster than qom-list
plus qom-get. When getting an entire QOM tree, I measured a 10x
speedup in elapsed time.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <1752248703-217318-2-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
v9fs_path_sprintf() is annotated with G_GNUC_PRINTF(2, 3) in
hw/9pfs/9p.c, but the prototype in hw/9pfs/9p.h is missing the
attribute, so callers that include only the header do not get format
checking.
Move the annotation to the header and delete the duplicate in the
source file. No behavior change.
Signed-off-by: Sean Wei <me@sean.taipei>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250613.qemu.9p.02@sean.taipei>
[CS: fix code style (max. 80 chars per line)]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
v9fs_string_sprintf() is annotated with G_GNUC_PRINTF(2, 3) in
9p-marshal.c, but the prototype in fsdev/9p-marshal.h is missing the
attribute, so callers that include only the header do not get format
checking.
Move the annotation to the header and delete the duplicate in the
source file. No behavior change.
Signed-off-by: Sean Wei <me@sean.taipei>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250613.qemu.9p.01@sean.taipei>
[CS: fix code style (max. 80 chars per line)]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
SPCR acpi table can now be disabled
vhost-vdpa can now report hashing capability to guest
PPTT acpi table now tells guest vCPUs are identical
vost-user-blk now shuts down faster
loongarch64 now supports bios-tables-test
intel_iommu now supports ATS
cxl now supports DCD Fabric Management Command Set
arm now supports acpi pci hotplug
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmh1+7APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcZ8H/2udpCZ49vjPB8IwQAGdFTw2TWVdxUQFHexQ
pOsCGyFBNAXqD1bmb8lwWyYVJ08WELyL6xWsQ5tfVPiXpKYYHPHl4rNr/SPoyNcv
joY++tagudmOki2DU7nfJ+rPIIuigOTUHbv4TZciwcHle6f65s0iKXhR1sL0cj4i
TS6iJlApSuJInrBBUxuxSUomXk79mFTNKRiXj1k58LRw6JOUEgYvtIW8i+mOUcTg
h1dZphxEQr/oG+a2pM8GOVJ1AFaBPSfgEnRM4kTX9QuTIDCeMAKUBo/mwOk6PV7z
ZhSrDPLrea27XKGL++EJm0fFJ/AsHF1dTks2+c0rDrSK+UV87Zc=
=sktm
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features, fixes, tests
SPCR acpi table can now be disabled
vhost-vdpa can now report hashing capability to guest
PPTT acpi table now tells guest vCPUs are identical
vost-user-blk now shuts down faster
loongarch64 now supports bios-tables-test
intel_iommu now supports ATS
cxl now supports DCD Fabric Management Command Set
arm now supports acpi pci hotplug
fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmh1+7APHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpcZ8H/2udpCZ49vjPB8IwQAGdFTw2TWVdxUQFHexQ
# pOsCGyFBNAXqD1bmb8lwWyYVJ08WELyL6xWsQ5tfVPiXpKYYHPHl4rNr/SPoyNcv
# joY++tagudmOki2DU7nfJ+rPIIuigOTUHbv4TZciwcHle6f65s0iKXhR1sL0cj4i
# TS6iJlApSuJInrBBUxuxSUomXk79mFTNKRiXj1k58LRw6JOUEgYvtIW8i+mOUcTg
# h1dZphxEQr/oG+a2pM8GOVJ1AFaBPSfgEnRM4kTX9QuTIDCeMAKUBo/mwOk6PV7z
# ZhSrDPLrea27XKGL++EJm0fFJ/AsHF1dTks2+c0rDrSK+UV87Zc=
# =sktm
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Jul 2025 02:56:48 EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (97 commits)
hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release
hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add
hw/cxl: Create helper function to create DC Event Records from extents
hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists
hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config
hw/mem: cxl_type3: Add DC Region bitmap lock
hw/cxl: Move definition for dynamic_capacity_uuid and enum for DC event types to header
hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config
hw/mem: cxl_type3: Add dsmas_flags to CXLDCRegion struct
hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info
hw/cxl: fix DC extent capacity tracking
tests: virt: Update expected ACPI tables for virt test
hw/acpi/aml-build: Build a root node in the PPTT table
hw/acpi/aml-build: Set identical implementation flag for PPTT processor nodes
tests: virt: Allow changes to PPTT test table
qtest/bios-tables-test: Generate reference blob for DSDT.acpipcihp
qtest/bios-tables-test: Generate reference blob for DSDT.hpoffacpiindex
tests/qtest/bios-tables-test: Add aarch64 ACPI PCI hotplug test
tests/qtest/bios-tables-test: Prepare for addition of acpi pci hp tests
hw/arm/virt: Let virt support pci hotplug/unplug GED event
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Conflicts:
net/vhost-vdpa.c
vhost_vdpa_set_steering_ebpf() was removed, resolve the context
conflict.
Generally APIs to the rest of QEMU should be documented in the headers.
Comments on individual functions or internal details are fine to live
in the C files. Make qemu_add_vm_change_state_handler_prio[_full]()
docstrings consistent by moving them from source to header.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250715171920.89670-1-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250703173248.44995-4-philmd@linaro.org>
cvtnum() expects input string to specify some sort of size
(optionally with KMG... suffix). However, there are a lot
of other number conversions in there (using qemu_strtol &Co),
also, not all conversions which use cvtnum, actually expects
size, - like dd count=nn.
Add bool is_size argument to cvtnum() to specify if it should
treat the argument as a size or something else, - this changes
conversion routine in use and error text.
Use the new cvtnum() in more places (like where strtol were used),
since it never return negative number in successful conversion.
When it makes sense, also specify upper or lower bounds at the
same time. This simplifies option processing in multiple places,
removing the need of local temporary variables and longer error
reporting code.
While at it, fix errors, like depth in measure must be >= 1,
while the previous code allowed it to be 0.
In a few places, change unsigned variables (like of type size_t)
to be signed instead, - to avoid the need of temporary conversion
variable. All these variables are okay to be signed, we never
assign <0 value to them except of the cases of conversion error,
where we return immediately.
While at it, remove allowed size suffixes from the error message
as it makes no sense most of the time (should be in help instead).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250531171609.197078-28-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
now once all individual subcommands has --help support, remove
the large unreadable help() thing and replace it with small
global --help, which refers to individual command --help for
more info.
While at it, also line-wrap list of formats after 75 chars.
Since missing_argument() and unrecognized_option() are now unused,
remove them.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250531171609.197078-27-mjt@tls.msk.ru>
[kwolf: Fixed up style and formatting]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Also add -s short option for --size (and remove OPTION_SIZE).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-26-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-25-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-24-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Add missing --object option.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-23-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-22-mjt@tls.msk.ru>
[kwolf: Fixed up qemu-iotests]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-21-mjt@tls.msk.ru>
[kwolf: Fixed up qemu-iotests]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'qemu-img resize --help' does not work, since it wants more
arguments. Also -size is only recognized as a very last
argument, but it is common for tools to handle other options
after positional arguments too.
Tell getopt_long() to return non-options together with options,
and process filename and size in the loop, and check if there's
an argument right after filename which looks like -N (number),
and treat it as size (decrement). This way we can handle --help,
and we can also have options after filename and size, and `--'
will be handled fine too.
The only case which is not handled right is when there's an option
between filename and size, and size is given as decrement, - in
this case -size will be treated as option, not as size.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-20-mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add missing long options and --help output,
reorder options for consistency.
Use -B for --backing-format, keep -F for
backwards compatibility.
Options added:
--format, --cache - for the image in question
--backing, --backing-format, --backing-cache, --backing-unsafe -
for the new backing file
(was eg CACHE vs SRC_CACHE, which is unclear).
Probably should rename local variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250531171609.197078-19-mjt@tls.msk.ru>
[kwolf: Removed command description from the argument list]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
