Certain TIMA operations should only be performed when a ring is valid,
others when the ring is invalid, and they are considered undefined if
used incorrectly. Add checks for this condition.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-44-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
After pulling the pool context, if a pool irq had been presented and
was cleared in the process, there could be a pending irq in phys that
should be presented. Process the phys irq ring after pulling pool ring
to catch this case and avoid losing irqs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-43-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the pool context is pulled, the shared pool/phys signal is
reset, which loses the qemu irq if a phys interrupt was presented.
Only reset the signal if a poll irq was presented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-42-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In preparation to implement POOL context push, add support for POOL
NVP context save/restore.
The NVP p bit is defined in the spec as follows:
If TRUE, the CPPR of a Pool VP in the NVP is updated during store of
the context with the CPPR of the Hard context it was running under.
It's not clear whether non-pool VPs always or never get CPPR updated.
Before this patch, OS contexts always save CPPR, so we will assume that
is the behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-41-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add some assertions to try to ensure presented group interrupts do
not get lost without being redistributed, if they become precluded
by CPPR or preempted by a higher priority interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-40-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When CPPR priority is decreased, pending interrupts do not need to be
re-checked if one is already presented because by definition that will
be the highest priority.
This prevents a presented group interrupt from being lost.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-39-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
OS-push operation must re-present pending interrupts. Use the
newly created xive2_tctx_process_pending() function instead of
duplicating the logic.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-38-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The second part of the set CPPR operation is to process (or re-present)
any pending interrupts after CPPR is adjusted.
Split this presentation processing out into a standalone function that
can be used in other places.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-37-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Have xive_tctx_notify() also set the new PIPR value and rename it to
xive_tctx_pipr_set(). This can replace the last xive_tctx_pipr_update()
caller because it does not need to update IPB (it already sets it).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-36-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The relationship between an interrupt signaled in the TIMA and the QEMU
irq line to the processor to be 1:1, so they should be raised and
lowered together and "just in case" lowering should be avoided (it could
mask
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-35-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The tctx "signaling" registers (PIPR, CPPR, NSR) raise an interrupt on
the target CPU thread. The POOL and PHYS rings both raise hypervisor
interrupts, so they both share one set of signaling registers in the
PHYS ring. The PHYS NSR register contains a field that indicates which
ring has presented the interrupt being signaled to the CPU.
This sharing results in all the "alt_regs" throughout the code. alt_regs
is not very descriptive, and worse is that the name is used for
conversions in both directions, i.e., to find the presenting ring from
the signaling ring, and the signaling ring from the presenting ring.
Instead of alt_regs, use the names sig_regs and sig_ring, and regs and
ring for the presenting ring being worked on. Add a helper function to
get the sign_regs, and add some asserts to ensure the POOL regs are
never used to signal interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-34-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Further split xive_tctx_pipr_update() by splitting out a new function
that is used to re-compute the PIPR from IPB. This is generally only
used with XIVE1, because group interrputs require more logic.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-33-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
xive_tctx_pipr_present() as implemented with xive_tctx_pipr_update()
causes VP-directed (group==0) interrupt to be presented in PIPR and NSR
despite being a lower priority than the currently presented group
interrupt.
This must not happen. The IPB bit should record the low priority VP
interrupt, but PIPR and NSR must not present the lower priority
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-32-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
xive_tctx_pipr_update() is used for multiple things. In an effort
to make things simpler and less overloaded, split out the function
that is used to present a new interrupt to the tctx.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-31-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A group interrupt that gets preempted by a higher priority interrupt
delivery must be redistributed otherwise it would get lost.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-30-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Have the match_nvt method only perform a TCTX match but don't present
the interrupt, the caller presents. This has no functional change, but
allows for more complicated presentation logic after matching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-29-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When disabling (pulling) an xive interrupt context, we need
to redistribute any active group interrupts to other threads
that can handle the interrupt if possible. This support had
already been added for the OS context but had not yet been
added to the pool or physical context.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-28-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add support for redistributing a presented group interrupt if it
is precluded as a result of changing the CPPR value. Without this,
group interrupts can be lost.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-27-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Booting AIX in a PowerVM partition requires the use of the "Acknowledge
O/S Interrupt to even O/S reporting line" special operation provided by
the IBM XIVE interrupt controller. This operation is invoked by writing
a byte (data is irrelevant) to offset 0xC10 of the Thread Interrupt
Management Area (TIMA). It can be used by software to notify the XIVE
logic that the interrupt was received.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-26-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Change pregs to pool_regs, for clarity.
[npiggin: split from larger patch]
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-25-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add more tracing around notification, redistribution, and escalation.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-24-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When an XIVE context is pulled while it has an active, unacknowledged
group interrupt, XIVE will check to see if a context on another thread
can handle the interrupt and, if so, notify that context. If there
are no contexts that can handle the interrupt, then the interrupt is
added to a backlog and XIVE will attempt to escalate the interrupt,
if configured to do so, allowing the higher privileged handler to
activate a context that can handle the original interrupt.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-23-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Adds support for extracting additional configuration flags from
the XIVE configuration register that are needed for redistribution
of group interrupts.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-22-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Writes to the Flush Control registers were logged as invalid
when they are allowed. Clearing the unsupported want_cache_disable
feature is supported, so don't log an error in that case.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-21-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Firmware expects to read back the WATCH_FULL bit from the VC_ENDC_WATCH_SPEC
register, so don't clear it on read.
Don't bother clearing the reads-as-zero CONFLICT bit because it's masked
at write already.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-20-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This can make it easier to see what the target system is trying to
do.
[npiggin: split from larger patch]
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-19-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add support for XIVE ESB Interrupt Escalation.
Suggested-by: Michael Kowal <kowal@linux.ibm.com>
[This change was taken from a patch provided by Michael Kowal.]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-18-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This improves the implementation of pulling pool and phys contexts in
XIVE1, by following closer the OS pulling code.
In particular, the old ring data is returned rather than the modified,
and irq signals are reset on pull.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-17-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rather than functions to return masks to test NSR bits, have functions
to test those bits directly. This should be no functional change, it
just makes the code more readable.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-16-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Have xive_tctx_accept clear NSR in one shot rather than masking out bits
as they are tested, which makes it clear it's reset to 0, and does not
have a partial NSR value in the register.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-15-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
If CPPR is lowered to preclude the pending interrupt, NSR should be
cleared and the qemu_irq should be lowered. This avoids some cases
of supurious interrupts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-14-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The group interrupt delivery flow selects the group backlog scan if
LSMFB < IPB, but that scan may find an interrupt with a priority >=
IPB. In that case, the VP-direct interrupt should be chosen. This
extends to selecting the lowest prio between POOL and PHYS rings.
Implement this just by re-starting the selection logic if the
backlog irq was not found or priority did not match LSMFB (LSMFB
is updated so next time around it would see the right value and
not loop infinitely).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-13-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Group interrupts should not be taken from the backlog and presented
if they are precluded by CPPR.
Fixes: 855434b3b8 ("ppc/xive2: Process group backlog when pushing an OS context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-12-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the XIVE spec, updating the CPPR should also update the
PIPR. The final value of the PIPR depends on other factors, but it
should never be set to a value that is above the CPPR.
Also added support for redistributing an active group interrupt when it
is precluded as a result of changing the CPPR value.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-11-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A problem was seen where uart interrupts would be lost resulting in the
console hanging. Traces showed that a lower priority interrupt was
preempting a higher priority interrupt, which would result in the higher
priority interrupt never being handled.
The new interrupt's priority was being compared against the CPPR
(Current Processor Priority Register) instead of the PIPR (Post
Interrupt Priority Register), as was required by the XIVE spec.
This allowed for a window between raising an interrupt and ACK'ing
the interrupt where a lower priority interrupt could slip in.
Fixes: 26c55b9941 ("ppc/xive2: Process group backlog when updating the CPPR")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-10-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The current xive algorithm for finding a matching group vCPU
target always uses the first vCPU found. And, since it always
starts the search with thread 0 of a core, thread 0 is almost
always used to handle group interrupts. This can lead to additional
interrupt latency and poor performance for interrupt intensive
work loads.
Changing this to use a simple round-robin algorithm for deciding which
thread number to use when starting a search, which leads to a more
distributed use of threads for handling group interrupts.
[npiggin: Also round-robin among threads, not just cores]
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-9-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the END Event Queue wraps the END EQ Generation bit is flipped and the
Generation Flipped bit is set to one. On a END cache Watch read operation,
the Generation Flipped bit needs to be reset.
While debugging an error modified END not valid error messages to include
the method since all were the same.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-8-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Test that the NSR exception bit field is equal to the pool ring value,
rather than any common bits set, which is more correct (although there
is no practical bug because the LSI NSR type is not implemented and
POOL/PHYS NSR are encoded with exclusive bits).
Fixes: 4c3ccac636 ("pnv/xive: Add special handling for pool targets")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-7-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pushing a context and loading IPB from NVP is defined to merge ('or')
that IPB into the TIMA IPB register. PIPR should therefore be calculated
based on the final IPB value, not just the NVP value.
Fixes: 9d2b6058c5 ("ppc/xive2: Add grouping level to notification")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-6-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In a multi chip environment there will be remote/forwarded VSDs. The check
to find a matching INT controller (XIVE) of the remote block number was
checking the INTs chip number. Block numbers are not tied to a chip number.
The matching remote INT is the one that matches the forwarded VSD address
with VSD types associated MMIO BAR.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-5-npiggin@gmail.com
[ clg: Fixed log format in pnv_xive2_get_remote() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The queue size of an Event Notification Descriptor (END)
is determined by the 'cl' and QsZ fields of the END.
If the cl field is 1, then the queue size (in bytes) will
be the size of a cache line 128B * 2^QsZ and QsZ is limited
to 4. Otherwise, it will be 4096B * 2^QsZ with QsZ limited
to 12.
Fixes: f8a233dedf ("ppc/xive2: Introduce a XIVE2 core framework")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-4-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Commit 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>") added
redundant qemu_mutex_init(&tdx->lock) in tdx_guest_init by mistake.
Fix it by removing the redundant one.
Fixes: 40da501d89 ("i386/tdx: handle TDG.VP.VMCALL<GetQuote>")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Link: https://lore.kernel.org/r/20250717103707.688929-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of host_cpu_max_instance_init() was merged into
host_cpu_instance_init() by commit 29f1ba338b ("target/i386: merge
host_cpu_instance_init() and host_cpu_max_instance_init()"), while the
declaration of it remains in host-cpu.h.
Clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250716063117.602050-1-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take tdx_guest->lock when injecting the event notification interrupt into
the guest.
Fixes CID 1612364.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 84fe49d94a ("meson: Add optional dependency on IGVM library")
was inconsistent with the contents of meson_options.txt and the one
generated in scripts/meson-buildoptions.sh
Let's regenerate the file in this way to keep them consistent and prevent
future changes from including the spurious diff:
touch meson_options.txt
make update-buildoptions
Fixes: 84fe49d94a ("meson: Add optional dependency on IGVM library")
Cc: roy.hopkins@randomman.co.uk
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20250717131256.157383-1-sgarzare@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
