Not needed since commit 63e7af2035 ("hw/mips: Restrict ITU to TCG").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250924165039.52250-1-philmd@linaro.org>
Since commit a97d5d2c8b ("accel/tcg: Use interval tree for TBs in
user-only mode") this code is guarded with #ifdef'ry and only build
for system emulation where mmap_unlock() is meaningless. Remove the
call.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250924164824.51971-1-philmd@linaro.org>
If we only have one vcpu, or within cpu_exec_step_atomic,
we needn't jump all the way back out to the cpu loop to
empty the code gen buffer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename the function and remove the path which
performs the flush immediately.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the test/flush/set block to a new function.
Use tb_flush__exclusive_or_serial while we're at it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In all cases, we are already within start_exclusive.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We need not call tb_flush once per cpu, only once per vmload.
By moving the call from cpu_common_post_load to a tcg-specific
vm_change_state_handler, we do even better than that: we only
flush when called from HMP triggered loadvm, when we had old
state to flush.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose a routine to be called when no cpus are running.
Simplify the do_tb_flush run_on_cpu callback, because
that is explicitly called with start_exclusive; there
is no need for the mmap_lock as well.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We only need invalidate tbs from a single page, not flush
all translations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tb_flush within write_misa was incorrect. It assumed
that we could adjust the ISA of the current processor and
discard all TB and all would be well. But MISA is per vcpu,
so globally flushing TB does not mean that the TB matches
the MISA of any given vcpu.
By recording misa in the tb state, we ensure that the code
generated matches the vcpu.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 288a5fe980, we don't link translation blocks
directly to palcode entry points. If we load palbr
from env instead of encoding the constant, we avoid
all need for tb_flush().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hasn't been needed since d828b92b8a
("accel/tcg: Introduce CF_BP_PAGE").
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When we remove dest from orig's links, we lose the link
that we rely on later to reset links. This can lead to
failure to release from spinlock with self-modifying code.
Cc: qemu-stable@nongnu.org
Reported-by: 李威威 <liweiwei@kubuds.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
This is a logical reversion of 2ad0450054, though
there have been additions to the set of mmu indexes
since then. The impetus to that original patch,
"9-15 will use shorter assembler instructions when
run on a x86-64 host" is now handled generically.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This array is within CPUNegativeOffsetState, which means the
last element of the array has an offset from env with the
smallest magnitude. This can be encoded into fewer bits
when generating TCG fast path memory references.
When we changed the NB_MMU_MODES to be a global constant,
rather than a per-target value, we pessimized the code
generated for targets which use only a few mmu indexes.
By inverting the array index, we counteract that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Encapsulate access to cpu->neg.tlb.f[] in a function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a typedef instead of uint16_t directly when
describing sets of mmu indexes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the astro PCI host bridge device, we call pci_register_root_bus()
in the device's instance_init. This is a problem for two reasons
* the PCI bridge is then available to the rest of the simulation
(e.g. via pci_qdev_find_device()), even though it hasn't
yet been realized
* we do not attempt to unregister in an instance_deinit,
which means that if you go through an instance_init -> deinit
lifecycle the freed memory for the host-bridge device is
left on the pci_host_bridges list
ASAN reports the resulting use-after-free:
==1776584==ERROR: AddressSanitizer: heap-use-after-free on address 0x51f00000cb00 at pc 0x5b2d460a89b5 bp 0x7ffef7617f50 sp 0x7ffef7617f48
WRITE of size 8 at 0x51f00000cb00 thread T0
#0 0x5b2d460a89b4 in pci_host_bus_register /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:608:5
#1 0x5b2d46093566 in pci_root_bus_internal_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:677:5
#2 0x5b2d460935e0 in pci_root_bus_new /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:706:5
#3 0x5b2d46093fe5 in pci_register_root_bus /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:751:11
#4 0x5b2d46fe2335 in elroy_pcihost_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci-host/astro.c:455:16
0x51f00000cb00 is located 1664 bytes inside of 3456-byte region [0x51f00000c480,0x51f00000d200)
freed by thread T0 here:
#0 0x5b2d4582385a in free (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17ad85a) (BuildId: 692b49eedc6fb0ef618bbb6784a09311b3b7f1e8)
#1 0x5b2d47160723 in object_finalize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:734:9
#2 0x5b2d471589db in object_unref /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:1232:9
#3 0x5b2d477d373c in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:237:5
previously allocated by thread T0 here:
#0 0x5b2d45823af3 in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17adaf3) (BuildId: 692b49eedc6fb0ef618bbb6784a09311b3b7f1e8)
#1 0x79728fa08b09 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x62b09) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b2d471595fc in object_new_with_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:767:15
#3 0x5b2d47159409 in object_new_with_class /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:782:12
#4 0x5b2d477d29a5 in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:206:11
Cc: qemu-stable@nongnu.org
Fixes: e029bb00a7 ("hw/pci-host: Add Astro system bus adapter found on PA-RISC machines")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3118
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250918114259.1802337-3-peter.maydell@linaro.org>
In the dino PCI host bridge device, we call pci_register_root_bus()
in the device's instance_init. This is a problem for two reasons
* the PCI bridge is then available to the rest of the simulation
(e.g. via pci_qdev_find_device()), even though it hasn't
yet been realized
* we do not attempt to unregister in an instance_deinit,
which means that if you go through an instance_init -> deinit
lifecycle the freed memory for the host-bridge device is
left on the pci_host_bridges list
ASAN reports the resulting use-after-free:
==1771223==ERROR: AddressSanitizer: heap-use-after-free on address 0x527000018f80 at pc 0x5b4b9d3369b5 bp 0x7ffd01929980 sp 0x7ffd01929978
WRITE of size 8 at 0x527000018f80 thread T0
#0 0x5b4b9d3369b4 in pci_host_bus_register /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:608:5
#1 0x5b4b9d321566 in pci_root_bus_internal_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:677:5
#2 0x5b4b9d3215e0 in pci_root_bus_new /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:706:5
#3 0x5b4b9d321fe5 in pci_register_root_bus /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci/pci.c:751:11
#4 0x5b4b9d390521 in dino_pcihost_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../hw/pci-host/dino.c:473:16
0x527000018f80 is located 1664 bytes inside of 12384-byte region [0x527000018900,0x52700001b960)
freed by thread T0 here:
#0 0x5b4b9cab185a in free (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17ad85a) (BuildId: ca496bb2e4fc750ebd289b448bad8d99c0ecd140)
#1 0x5b4b9e3ee723 in object_finalize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:734:9
#2 0x5b4b9e3e69db in object_unref /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:1232:9
#3 0x5b4b9ea6173c in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:237:5
#4 0x5b4b9ec4e0f3 in qmp_marshal_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qapi/qapi-commands-qdev.c:65:14
previously allocated by thread T0 here:
#0 0x5b4b9cab1af3 in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/qemu-system-hppa+0x17adaf3) (BuildId: ca496bb2e4fc750ebd289b448bad8d99c0ecd140)
#1 0x799d8270eb09 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x62b09) (BuildId: 1eb6131419edb83b2178b682829a6913cf682d75)
#2 0x5b4b9e3e75fc in object_new_with_type /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:767:15
#3 0x5b4b9e3e7409 in object_new_with_class /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/object.c:782:12
#4 0x5b4b9ea609a5 in qmp_device_list_properties /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/hppa-asan/../../qom/qom-qmp-cmds.c:206:11
where we allocated one instance of the dino device, put it on the
list, freed it, and then trying to allocate a second instance touches
the freed memory on the pci_host_bridges list.
Fix this by deferring all the setup of memory regions and registering
the PCI bridge to the device's realize method. This brings it into
line with almost all other PCI host bridges, which call
pci_register_root_bus() in realize.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3118
Fixes: 63901b6cc4 ("dino: move PCI bus initialisation to dino_pcihost_init()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250918114259.1802337-2-peter.maydell@linaro.org>
For v7, bits [12:5] are ignored for !imm.
For v8, those same bits are reserved, but are not trapped.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: e8325dc02d ("target/sparc: Move RDTBR, FLUSHW to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: 5d617bfba0 ("target/sparc: Move RDWIM, RDPR to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For v7, bits [18:0] are ignored.
For v8, bits [18:14] are reserved and bits [13:0] are ignored.
Fixes: 668bb9b755 ("target/sparc: Move RDPSR, RDHPR to decodetree")
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bits [18:0] are not decoded with v7, and for v8 unused values
of rs1 simply produce undefined results.
Fixes: af25071c1d ("target/sparc: Move RDASR, STBAR, MEMBAR to decodetree")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Solaris 8 appears to have a bug whereby it executes v9 MEMBAR
instructions when booting a freshly installed image. According
to the SPARC v8 architecture manual, whilst bits 13 and bits 12-0
of the "Read State Register Instructions" are notionally zero,
they are marked as unused (i.e. ignored).
Fixes: af25071c1d ("target/sparc: Move RDASR, STBAR, MEMBAR to decodetree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3097
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Use ## to drop the preceding comma if __VA_ARGS__ is empty.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit adds support for the `prctl(PR_SET_SYSCALL_USER_DISPATCH)`
function in the Linux userspace emulator.
It is implemented as a fully host-independent function, by forcing
a SIGSYS early during syscall handling, if the PC is outside the
allowed range.
Since disabled SUD is indistinguishable from enabled SUD with
always-allowed region length == ~0, this encoding is used
instead of introducing a new flag.
Tested on [uglendix][1], will probably also apply to software like
tiny-wine, rpcsx, limbo, lazypoline, vicar, sysfail and endokernel,
to name a few.
[1]: https://sr.ht/~arusekk/uglendix
Signed-off-by: Arusekk <floss@arusekk.pl>
Message-ID: <20250711225226.14652-1-floss@arusekk.pl>
[rth: Split out is_vdso_sigreturn region matching and other minor tweaks.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a target does not support a vdso, we generate a sigtramp page.
The only thing on this page is a (set of) signal return syscalls.
We do not need to narrowly restrict the vdso_sigreturn_region;
simply record the entire page for all such targets.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark the regions which contain sigreturn syscalls within
each vdso. Rebuild the shared objects.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These variables will be populated from the vdso, and used
for detecting whether we are executing the sigreturn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Check and honour failures to the blocking flag on FDs
* Don't touch blocking flags on FDs received during migration
-----BEGIN PGP SIGNATURE-----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=rrMd
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
* Update security triage contact address
* Check and honour failures to the blocking flag on FDs
* Don't touch blocking flags on FDs received during migration
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmjNQuAACgkQvobrtBUQ
# T99xaBAAr6zQPii1tjzuzLovF6MIqtldXnmVO/yjcl5NgLWonIRDt2JsxnRxi3es
# 9uNDed5+ePNXmUAYd46k81gBEjBWbv465kt5FHAZZV6BRw/PPzkoh+jzGc8NVir8
# 3GZJ2kPr51PxGEl8md2vRthg4bMuhlS5ogCEqAMDYT4f6AVemfnNQ5NttGX353T2
# etxoMhEeMtTBKjMoTBv+SVhhO4nKwZ+6CFhvuGON423EfrGlkNTXyprKTdzpr4i0
# 4KDQLxxoANlmg/1W0PxfrLiBCmGpHweMR44Piv715VYa2YNPRq0G6EC6AFGbHZ51
# N+mKmWNE0CS5rP1TEacSCX4q6If5VxjSLLj+og8LmpIlJ6tiqdrisSqA6bzCJ1f/
# lMsfUsKoMqPhqat9ZGUkYu8REgKP+O+CSGJNftYTsEEY0oKZrAW4fsoN3E9qpfcG
# Xy6eSu0TTGDWE6CEe0vkHiQwlVHMtRcWMSPwlsvrgt2TO6k97reT3AoIBK2VfygC
# WzMv0P0nBvHFKeIbqmFOk3BEI5+JECgxVRc1WXWbSFLW0PBY/xd7g6ow8uaQsd9e
# pzMA1Pwh2EuM4DTlOy+m9zBOhm9YP9An188NLldOne3TFKFYe5QO1DQpvvEGvIGB
# +4XpmyOj3g2ycelZZ5XsDJk0LumCCOcbSPSiAvHZyWwLo24EABE=
# =rrMd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 19 Sep 2025 04:47:44 AM PDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [unknown]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
util/vhost-user-server: vu_message_read(): improve error handling
chardev: close an fd on failure path
chardev: qemu_chr_open_fd(): add errp
treewide: use qemu_set_blocking instead of g_unix_set_fd_nonblocking
util: drop qemu_socket_set_block()
io/channel-socket: rework qio_channel_socket_copy_fds()
util: drop qemu_socket_try_set_nonblock()
util: drop qemu_socket_set_nonblock()
migration: qemu_file_set_blocking(): add errp parameter
treewide: handle result of qio_channel_set_blocking()
util: add qemu_set_blocking() function
char-socket: tcp_chr_recv(): add comment
char-socket: tcp_chr_recv(): drop extra _set_(block,cloexec)
io/channel: document how qio_channel_readv_full() handles fds
migration/qemu-file: don't make incoming fds blocking again
MAINTAINERS: list qemu-security@nongnu.org as security contact
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. Drop extra error_report_err(NULL), it will just crash, if we get
here.
2. Get and report error of qemu_set_blocking(), instead of aborting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are at least two failure paths, where we forget
to close an fd.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Every caller already support errp, let's go further.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of open-coded g_unix_set_fd_nonblocking() calls, use
QEMU wrapper qemu_set_blocking().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix missing closing ) in tap-bsd.c, remove now unused GError var]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now it's unused.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to switch from qemu_socket_set_block() to newer
qemu_set_blocking(), which provides return status of operation,
to handle errors.
Still, we want to keep qio_channel_socket_readv() interface clean,
as currently it allocate @fds only on success.
So, in case of error, we should close all incoming fds and keep
user's @fds untouched or zero.
Let's make separate functions qio_channel_handle_fds() and
qio_channel_cleanup_fds(), to achieve what we want.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now we can use qemu_set_blocking() in these cases.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use common qemu_set_blocking() instead.
Note that pre-patch the behavior of Win32 and Linux realizations
are inconsistent: we ignore failure for Win32, and assert success
for Linux.
How do we convert the callers?
1. Most of callers call qemu_socket_set_nonblock() on a
freshly created socket fd, in conditions when we may simply
report an error. Seems correct switching to error handling
both for Windows (pre-patch error is ignored) and Linux
(pre-patch we assert success). Anyway, we normally don't
expect errors in these cases.
Still in tests let's use &error_abort for simplicity.
What are exclusions?
2. hw/virtio/vhost-user.c - we are inside #ifdef CONFIG_LINUX,
so no damage in switching to error handling from assertion.
3. io/channel-socket.c: here we convert both old calls to
qemu_socket_set_nonblock() and qemu_socket_set_block() to
one new call. Pre-patch we assert success for Linux in
qemu_socket_set_nonblock(), and ignore all other errors here.
So, for Windows switch is a bit dangerous: we may get
new errors or crashes(when error_abort is passed) in
cases where we have silently ignored the error before
(was it correct in all such cases, if they were?) Still,
there is no other way to stricter API than take
this risk.
4. util/vhost-user-server - compiled only for Linux (see
util/meson.build), so we are safe, switching from assertion to
&error_abort.
Note: In qga/channel-posix.c we use g_warning(), where g_printerr()
would actually be a better choice. Still let's for now follow
common style of qga, where g_warning() is commonly used to print
such messages, and no call to g_printerr(). Converting everything
to use g_printerr() should better be another series.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_file_set_blocking() is a wrapper on qio_channel_set_blocking(),
so let's passthrough the errp.
Note the migration should not be using &error_abort in these calls,
however, this is done to expedite the API conversion.
The original code would have eventually ended up calling either
qemu_socket_set_nonblock which would asset on Linux, or
g_unix_set_fd_nonblocking which would propagate errors. We never
saw asserts in practice, and conceptually they should not happen,
but ideally this code will be later adapted to remove use of
&error_abort.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, we just always pass NULL as errp argument. That doesn't
look good.
Some realizations of interface may actually report errors.
Channel-socket realization actually either ignore or crash on
errors, but we are going to straighten it out to always reporting
an errp in further commits.
So, convert all callers to either handle the error (where environment
allows) or explicitly use &error_abort.
Take also a chance to change the return value to more convenient
bool (keeping also in mind, that underlying realizations may
return -1 on failure, not -errno).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix return type mismatch in TLS/websocket channel
impls for qio_channel_set_blocking]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In generic code we have qio_channel_set_blocking(), which takes
bool parameter, and qemu_file_set_blocking(), which as well takes
bool parameter.
At lower fd-layer we have a mess of functions:
- enough direct calls to Unix-specific g_unix_set_fd_nonblocking()
(of course, all calls are out of Windows-compatible code), which
is glib specific with GError, which we can't use, and have to
handle error-reporting by hand after the call.
and several platform-agnostic qemu_* helpers:
- qemu_socket_set_nonblock(), which asserts success for posix (still,
in most cases we can handle the error in better way) and ignores
error for win32 realization
- qemu_socket_try_set_nonblock(), providing and error, but not errp,
so we have to handle it after the call
- qemu_socket_set_block(), which simply ignores an error
Note, that *_socket_* word in original API, which we are going
to substitute was intended, because Windows support these operations
only for sockets. What leads to solution of dropping it again?
1. Having a QEMU-native wrapper with errp parameter
for g_unix_set_fd_nonblocking() for non-socket fds worth doing,
at least to unify error handling.
2. So, if try to keep _socket_ vs _file_ words, we'll have two
actually duplicated functions for Linux, which actually will
be executed successfully on any (good enough) fds, and nothing
prevent using them improperly except for the name. That doesn't
look good.
3. Naming helped us in the world where we crash on errors or
ignore them. Now, with errp parameter, callers are intended to
proper error checking. And for places where we really OK with
crash-on-error semantics (like tests), we have an explicit
&error_abort.
So, this commit starts a series, which will effectively revert
commit ff5927baa7 "util: rename qemu_*block() socket functions"
(which in turn was reverting f9e8cacc55
"oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()",
so that's a long story).
Now we don't simply rename, instead we provide the new API and
update all the callers.
This commit only introduces a new fd-layer wrapper. Next commits
will replace old API calls with it, and finally remove old API.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comment, to stress that the order of operation (first drop old fds,
second check read status) is intended.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qio_channel_readv_full() guarantees BLOCKING and CLOEXEC states for
incoming descriptors, no reason to call extra ioctls.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only realization, which may have incoming fds is
qio_channel_socket_readv() (in io/channel-socket.c).
qio_channel_socket_readv() do call (through
qio_channel_socket_copy_fds()) qemu_socket_set_block() and
qemu_set_cloexec() for each fd.
Also, qio_channel_socket_copy_fds() is called at the end of
qio_channel_socket_readv(), on success path.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In migration we want to pass fd "as is", not changing its
blocking status.
The only current user of these fds is CPR state (through VMSTATE_FD),
which of-course doesn't want to modify fds on target when source is
still running and use these fds.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu-security@nongnu.org list is considered the authoritative
contact for reporting QEMU security issues. Remove the Red Hat
security team address in favour of QEMU's list, to ensure that
upstream gets first contact. There is a representative of the
Red Hat security team as a member of qemu-security@nongnu.org
whom requests CVE assignments on behalf of QEMU when needed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
