lrdr-capacity contains phys field which communicates the maximum address
in bytes and therefore, the most memory that can be allocated to this
partition. This is usually populated when maxmem is provided alongwith
memory size on qemu command line. However since maxmem is an optional
param, this leads to bits being set to 0 in absence of maxmem param.
Fix this by initializing the respective bits as per total mem size in
such case.
Reported-by: Gaurav Batra <gbatra@us.ibm.com>
Tested-by: David Christensen <drc@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/r/20250506042903.76250-1-harshpb@linux.ibm.com
Message-ID: <20250506042903.76250-1-harshpb@linux.ibm.com>
Adds a test machine for the IBM PPE42 processor, including a
DEC, FIT, WDT and 512 KiB of ram.
The purpose of this machine is only to provide a generic platform
for testing instructions of the recently added PPE42 processor
model which is used extensively in the IBM Power9, Power10 and
future Power server processors.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-9-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-9-milesg@linux.ibm.com>
The IBM PPE42 processors support a 32-bit decrementer
that can raise an external interrupt when DEC[0]
transitions from a 0 to a -1 (a non-negative value to a
negative value). It also continues decrementing
even after this condition is met.
The BookE timer is slightly different in that it
raises an interrupt when the DEC value reaches 0
and stops decrementing at that point.
Support a PPE42 version of the BookE timer by
adding a new PPC_TIMER_PPE flag that has the timer
code look for the transition from a non-negative value
to a negative value and allows the value to
continue decrementing.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925201758.652077-8-milesg@linux.ibm.com
Message-ID: <20250925201758.652077-8-milesg@linux.ibm.com>
Introduce Power11 ChipTod. The code has been copied from Power10 ChipTod
code as the Power11 core is same as Power10 core.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-7-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-7-adityag@linux.ibm.com>
Power11 also uses PHB5, same as Power10.
Add Power11 PHBs with similar code as the corresponding Power10 implementation.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-6-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-6-adityag@linux.ibm.com>
Add a XIVE2 controller to Power11 chip and machine.
The controller has the same logic as Power10.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-5-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-5-adityag@linux.ibm.com>
Existing code in XIVE2 assumes the chip to be a Power10 Chip.
Instead add a handler to get reference to the interrupt controller (XIVE)
for a given Power Chip.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-4-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-4-adityag@linux.ibm.com>
The Powernv11 machine doesn't have XIVE & PHBs as of now
XIVE2 interface and PHB5 added in later patches to Powernv11 machine
Also add mention of Power11 to powernv documentation
Note: A difference from P10's and P11's machine_class_init is, in P11
different number of PHBs cannot be used on the command line, ie. the
following line does NOT exist in pnv_machine_power11_class_init, which
existed in case of Power10:
machine_class_allow_dynamic_sysbus_dev(mc, TYPE_PNV_PHB);
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-3-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-3-adityag@linux.ibm.com>
Implement Pnv11Chip, currently without chiptod, xive and phb.
Chiptod, XIVE, PHB are implemented in later patches.
Since Power11 core is same as Power10, the implementation of Pnv11Chip
is a duplicate of corresponding Pnv10Chip.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/r/20250925173049.891406-2-adityag@linux.ibm.com
Message-ID: <20250925173049.891406-2-adityag@linux.ibm.com>
With the rename of VFIOContainer to VFIOLegacyContainer, the vfio-container.h
header file containing the struct definition is misleading. Rename it from
vfio-container.h to vfio-container-legacy.h accordingly, fixing up the name
of the include guard at the same time.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250925113159.1760317-4-mark.caveayland@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now that the VFIOContainer struct name is available, rename VFIOContainerBase
to VFIOContainer to better indicate that it is the superclass of other
VFIOFooContainer structs.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250925113159.1760317-3-mark.caveayland@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The VFIOContainer struct represents the legacy VFIO container even though the
name suggests it may be the common superclass of all VFIO containers. Rename it
to VFIOLegacyContainer to make this clearer, which is also a better match for
its VFIO_IOMMU_LEGACY QOM type name.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250925113159.1760317-2-mark.caveayland@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We only need invalidate tbs from a single page, not flush
all translations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that cpu_exit() actually kicks all accelerators, use it whenever
the message to another thread is processed in qemu_wait_io_event().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPU threads write exit_request as a "note to self" that they need to
go out to a slow path. This write happens out of the BQL and can be
a data race with another threads' cpu_exit(); use atomic accesses
consistently.
While at it, change the source argument from int ("1") to bool ("true").
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a QOM cast to convert to VFIOContainer instead of accessing bcontainer
directly.
Signed-off-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250715093110.107317-6-mark.caveayland@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently when CONFIG_POWERNV is not enabled, the build fails, such as
with --without-default-devices:
$ ./configure --without-default-devices
$ make
[281/283] Linking target qemu-system-ppc64
FAILED: qemu-system-ppc64
cc -m64 @qemu-system-ppc64.rsp
/usr/bin/ld: libqemu-ppc64-softmmu.a.p/target_ppc_misc_helper.c.o: in function `helper_load_sprd':
.../target/ppc/misc_helper.c:335:(.text+0xcdc): undefined reference to `pnv_chip_find_core'
/usr/bin/ld: libqemu-ppc64-softmmu.a.p/target_ppc_misc_helper.c.o: in function `helper_store_sprd':
.../target/ppc/misc_helper.c:375:(.text+0xdf4): undefined reference to `pnv_chip_find_core'
collect2: error: ld returned 1 exit status
...
This is since target/ppc/misc_helper.c references PowerNV specific
'pnv_chip_find_core' call.
Split the PowerNV specific SPRD code out of the generic PowerPC code, by
moving the SPRD code to pnv.c
Fixes: 9808ce6d5c ("target/ppc: Big-core scratch register fix")
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250820122516.949766-2-adityag@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add 10.2 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250805095616.1168905-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Have the match_nvt method only perform a TCTX match but don't present
the interrupt, the caller presents. This has no functional change, but
allows for more complicated presentation logic after matching.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-29-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now after merging the precopy and postcopy version of complete() hook,
rename the precopy version from save_live_complete_precopy() to
save_complete().
Dropping the "live" when at it, because it's in most cases not live when
happening (in precopy).
No functional change intended.
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20250613140801.474264-7-peterx@redhat.com
[peterx: squash the fixup that covers a few more doc spots, per Juraj]
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Several source comments still refer to docs with the old .txt
extension that were previously converted to reStructuredText.
Update these references to use the correct .rst extensions to
maintain accurate in-tree documentation pointers.
No functional changes.
Related commits:
50f8174c5c (Jul 2021): docs/specs/acpi_nvdimm: Convert to rST
f054eb1c92 (Jul 2021): docs/specs/acpi_pci_hotplug: Convert to rST
912fb3678b (Sep 2023): docs/specs/vmgenid: Convert to rST
bb1cff6ee0 (Sep 2023): docs/specs/ivshmem-spec: Convert to rST
55ff468f78 (Jan 2022): docs: Rename ppc-spapr-hotplug.txt to .rst
Signed-off-by: Sean Wei <me@sean.taipei>
Message-ID: <20250616.qemu.relocated.05@sean.taipei>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit fcb1ad456c ("system/datadir: Add new type constant for DTB files")
introduced a new type constant for DTB files and converted the boards with
bundled device trees to use it. Convert the other boards for consistency.
Fixes: fcb1ad456c ("system/datadir: Add new type constant for DTB files")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20250610204131.2862-2-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'tpm_execute' method has a pair of 4k arrays used for copying
data between guest and host. Skip the automatic zero-init of these
arrays to eliminate the performance overhead in the I/O hot path.
The two arrays will be fully initialized when reading data from
guest memory or reading data from the proxy FD.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-26-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'occ_model_tick' method has a 12k struct used for copying
data between guest and host. Skip the automatic zero-init of this
struct to eliminate the performance overhead in the I/O hot path.
The 'dynamic_data' buffer will be fully initialized when reading
data from the guest.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-25-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rather than accessing the attributes of TYPE_CCSR directly, use the SysBusDevice
API which exists exactly for that purpose. Furthermore, registering the memory
region with the SysBusDevice API makes it show up in QMP's `info qom-tree`
command.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[balaton: rebased]
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <619a58d1f83d2aad5b4feec930d46c64abff0977.1748012109.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Different machines have different frequencies so make this
configurable in machine class instead of using a hard coded constant.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <431166f96ff12ff3dbc670d40544974415f11305.1748012109.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This reverts commit d0b2542574.
Loading firmware from the PCI host is unusual and raven is only used
by one board so this does not simplify anything but rather complicates
it. Revert to loading firmware from board code as that is the usual
way and also because raven has nothing to do with ROM so it is not a
good place for this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <4ca4f71bf661923d9a91b7e6776a0e40726e2337.1746374076.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
-----BEGIN PGP SIGNATURE-----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=DXnZ
-----END PGP SIGNATURE-----
Merge tag 'single-binary-20250425' of https://github.com/philmd/qemu into staging
Various patches loosely related to single binary work:
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmgLqb8ACgkQ4+MsLN6t
# wN6nCQ//cmv1M+NsndhO5TAK8T1eUSXKlTZh932uro6ZgxKwN4p+j1Qo7bq3O9gu
# qUMHNbcfQl8sHSytiXBoxCjLMCXC3u38iyz75WGXuPay06rs4wqmahqxL4tyno3l
# 1RviFts9xlLn+tJqqrAR6+pRdALld0TY+yXUjXgr4aK5pIRpLz9U/sIEoh7qbA5U
# x0MTaceDG3A91OYo0TgrNbcMe1b9GqQZ+a4tbaP+oE37wbiKdyQ68LjrEbV08Y1O
# qrFF4oxquV31QJcUiuII1W7hC6psGrMsUA1f1qDu7QvmybAZWNZNsR9T66X9jH5J
# wXMShJmmXwxugohmuPPFnDshzJy90aFL6Jy2shrfqcG2v0W66ARY1ZnbJLCcfczt
# 073bnE2dnOVhd/ny37RrIJNJLLmYM0yFDeKuYtNNAzpK9fpA7Q2PI8QiqNacQ3Pa
# TdEYrGlMk7OeNck8xJmJMY5rATthi1D4dIBv3rjQbUolQvPJe2Y9or0R2WL1jK5v
# hhr6DY01iSPES3CravmUs/aB1HRMPi/nX45OmFR6frAB7xqWMreh81heBVuoTTK8
# PuXtRQgRMRKwDeTxlc6p+zba4mIEYG8rqJtPFRgViNCJ1KsgSIowup3BNU05YuFn
# NoPoRayMDVMgejVgJin3Mg2DCYvt/+MBmO4IoggWlFsXj59uUgA=
# =DXnZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 25 Apr 2025 11:26:55 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'single-binary-20250425' of https://github.com/philmd/qemu: (58 commits)
qemu: Convert target_name() to TargetInfo API
accel: Move target-agnostic code from accel-target.c -> accel-common.c
accel: Make AccelCPUClass structure target-agnostic
accel: Include missing 'qemu/accel.h' header in accel-internal.h
accel: Implement accel_init_ops_interfaces() for both system/user mode
cpus: Move target-agnostic methods out of cpu-target.c
cpus: Replace CPU_RESOLVING_TYPE -> target_cpu_type()
qemu: Introduce target_cpu_type()
qapi: Rename TargetInfo structure as QemuTargetInfo
hw/microblaze: Evaluate TARGET_BIG_ENDIAN at compile time
hw/mips: Evaluate TARGET_BIG_ENDIAN at compile time
target/xtensa: Evaluate TARGET_BIG_ENDIAN at compile time
target/mips: Check CPU endianness at runtime using env_is_bigendian()
accel/kvm: Use target_needs_bswap()
linux-user/elfload: Use target_needs_bswap()
target/hexagon: Include missing 'accel/tcg/getpc.h'
accel/tcg: Correct list of included headers in tcg-stub.c
system/kvm: make functions accessible from common code
meson: Use osdep_prefix for strchrnul()
meson: Share common C source prefixes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently DTB files are mixed with ROMs under BIOS type. Separate them
under a new type constant and turn defines into an enum while at it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <ae793d1f81e3577605759c43871722324a1ef2cb.1745402140.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
All callers now correctly expect a const class data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-5-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
VFIOAddressSpace is a common object used by VFIOContainerBase which is
declared in "hw/vfio/vfio-container-base.h". Move the VFIOAddressSpace
related services into "container-base.c".
While at it, rename :
vfio_get_address_space -> vfio_address_space_get
vfio_put_address_space -> vfio_address_space_put
to better reflect the namespace these routines belong to.
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-15-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
We include this header where needed. When includes set already have
ifdef CONFIG_USER_ONLY, we add it here, else, we don't condition the
include.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-5-pierrick.bouvier@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add 10.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250414094543.221241-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
=NzCN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* exec/cpu-all: remove BSWAP_NEEDED
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
# hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
# pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
# YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
# vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
# awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
# =NzCN
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Mar 2025 14:34:51 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
rust: hpet: fix decoding of timer registers
rust/vmstate: Include complete crate path of VMStateFlags in vmstate_clock
rust/vmstate: Add unit test for vmstate_validate
rust/vmstate: Add unit test for pointer case
rust/vmstate: Add unit test for vmstate_{of|struct} macro
rust/vmstate: Add unit test for vmstate_of macro
rust/vmstate: Support vmstate_validate
rust/vmstate: Re-implement VMState trait for timer binding
rust/vmstate: Relax array check when build varray in vmstate_struct
rust/vmstate: Fix unnecessary VMState bound of with_varray_flag()
rust/vmstate: Fix "cannot infer type" error in vmstate_struct
rust/vmstate: Fix type check for varray in vmstate_struct
rust/vmstate: Fix size field of VMStateField with VMS_ARRAY_OF_POINTER flag
rust/vmstate: Fix num field when varray flags are set
rust/vmstate: Fix num_offset in vmstate macros
rust/vmstate: Remove unnecessary unsafe
exec/cpu-all: remove BSWAP_NEEDED
load_aout: replace bswap_needed with big_endian
rust: pl011: Check size of state struct at compile time
hw/char/pl011: Pad PL011State struct to same size as Rust impl
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Targets know whether they are big-endian more than they know if
the endianness is different from the host: the former is mostly
a constant, at least in machine creation code, while the latter
has to be computed with TARGET_BIG_ENDIAN != HOST_BIG_ENDIAN or
something like that.
load_aout, however, takes a "bswap_needed" argument. Replace
it with a "big_endian" argument; even though all users are
big-endian, it is cheap enough to keep the optional swapping
functionality even for little-endian boards.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When POWER10 CPU was made as default, we missed keeping POWER9 as
default for older pseries releases (pre-9.0) at that time.
This caused breakge in default cpu evaluation for older pseries
machines and hence this fix.
Fixes: 51113013f3 ("ppc/spapr: change pseries machine default to POWER10 CPU")
Cc: qemu-stable@nongnu.org
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250313094705.2361997-1-harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The variable holding default env is not supposed to be written.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250314200145.08E0F4E6067@zero.eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Coverity reported that return value of blk_pwrite() maybe should not
be ignored. We can't do much if this happens other than report an
error but let's do that to silence this report.
Resolves: Coverity CID 1593725
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250314200140.2DBE74E6069@zero.eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
