The upcoming changes in the reverse_debugging functional test to remove
Avocado as a dependency will require pygdbmi for interacting with GDB,
so install it in meson's venv (located in the build dir's pyvenv/).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20251003141820.85278-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add check-venv target as a dependency for the functional tests. This
causes Python modules listed in pythondeps.toml, under the testdeps
group, to be installed when 'make check-functional{-<ARCH>}' is executed
to prepare and run the functional tests.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20251003141820.85278-2-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The registration-token method is being deprecated:
https://docs.gitlab.com/ci/runners/new_creation_workflow/
As a result we can drop a bunch of the descriptive stuff as that is
entered on the web UI. We don't need a secondary runner if we just
create one with both aarch64 and aarch32 tags.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-8-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-7-alex.bennee@linaro.org>
In anticipation of new runners lets move to a newer Ubuntu LTS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-6-alex.bennee@linaro.org>
With only TCG available we can't support 64 bit guests on a 32 bit
host.
Fixes: 5c27baf951 (docs/about/deprecated: Deprecate 32-bit x86 hosts for system emulation)
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-5-alex.bennee@linaro.org>
With this change also reference the upstream repo.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-4-alex.bennee@linaro.org>
With this change also reference the upstream repo.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-3-alex.bennee@linaro.org>
This is very much the result of my recent fat finger but I think it's
safer to assume that origin/master points to a recent commit (or at
least a commit a given branch is based on) than master.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20251001170947.2769296-2-alex.bennee@linaro.org>
users can now control VM bit in smbios.
vhost-user-device is now user-createable.
intel_iommu now supports PRI
virtio-net now supports GSO over UDP tunnel
ghes now supports error injection
amd iommu now supports dma remapping for vfio
better error messages for virtio
small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmji0s0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpuH4H/09h70IqAWZGHIWKGmmGGtdKOj3g54KuI0Ss
mGECEsHvvBexOy670Qy8jdgXfaW4UuNui8BiOnJnGsBX8Y0dy+/yZori3KhkXkaY
D57Ap9agkpHem7Vw0zgNsAF2bzDdlzTiQ6ns5oDnSq8yt82onCb5WGkWTGkPs/jL
Gf8Jv+Ddcpt5SU4/hHPYC8pUhl7z4xPOOyl0Qp1GG21Pxf5v4sGFcWuGGB7UEPSQ
MjZeoM0rSnLDtNg18sGwD5RPLQs13TbtgsVwijI79c3w3rcSpPNhGR5OWkdRCIYF
8A0Nhq0Yfo0ogTht7yt1QNPf/ktJkuoBuGVirvpDaix2tCBECes=
=Zvq/
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features, fixes
users can now control VM bit in smbios.
vhost-user-device is now user-createable.
intel_iommu now supports PRI
virtio-net now supports GSO over UDP tunnel
ghes now supports error injection
amd iommu now supports dma remapping for vfio
better error messages for virtio
small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmji0s0PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpuH4H/09h70IqAWZGHIWKGmmGGtdKOj3g54KuI0Ss
# mGECEsHvvBexOy670Qy8jdgXfaW4UuNui8BiOnJnGsBX8Y0dy+/yZori3KhkXkaY
# D57Ap9agkpHem7Vw0zgNsAF2bzDdlzTiQ6ns5oDnSq8yt82onCb5WGkWTGkPs/jL
# Gf8Jv+Ddcpt5SU4/hHPYC8pUhl7z4xPOOyl0Qp1GG21Pxf5v4sGFcWuGGB7UEPSQ
# MjZeoM0rSnLDtNg18sGwD5RPLQs13TbtgsVwijI79c3w3rcSpPNhGR5OWkdRCIYF
# 8A0Nhq0Yfo0ogTht7yt1QNPf/ktJkuoBuGVirvpDaix2tCBECes=
# =Zvq/
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 05 Oct 2025 01:19:25 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [unknown]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (75 commits)
virtio: improve virtqueue mapping error messages
pci: Fix wrong parameter passing to pci_device_get_iommu_bus_devfn()
intel_iommu: Simplify caching mode check with VFIO device
intel_iommu: Enable Enhanced Set Root Table Pointer Support (ESRTPS)
vdpa-dev: add get_vhost() callback for vhost-vdpa device
amd_iommu: HATDis/HATS=11 support
intel-iommu: Move dma_translation to x86-iommu
amd_iommu: Refactor amdvi_page_walk() to use common code for page walk
amd_iommu: Do not assume passthrough translation when DTE[TV]=0
amd_iommu: Toggle address translation mode on devtab entry invalidation
amd_iommu: Add dma-remap property to AMD vIOMMU device
amd_iommu: Set all address spaces to use passthrough mode on reset
amd_iommu: Toggle memory regions based on address translation mode
amd_iommu: Invalidate address translations on INVALIDATE_IOMMU_ALL
amd_iommu: Add replay callback
amd_iommu: Unmap all address spaces under the AMD IOMMU on reset
amd_iommu: Use iova_tree records to determine large page size on UNMAP
amd_iommu: Sync shadow page tables on page invalidation
amd_iommu: Add basic structure to support IOMMU notifier updates
amd_iommu: Add a page walker to sync shadow page tables on invalidation
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A checkpatch.pl improvement for the QEMU BH APIs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmjj2TEACgkQnKSrs4Gr
c8iAxwf+Pt4Pc6/8CuwSzz+uREnKZr9qHtFDwcvlJrlGwJLH7AAGOv5l5Ay8A/yC
qmfLGlKjbpLLuh+A4q7pdFffbOP1goS8GeyoLRPRV9w3WhTp0GQovRp8BAxzNvCz
qpWwjsCSNVq990IuoJCBl6/GWAOg9fgwzhZwufmiV6+xiYI+bg1au8ehU+eB824s
BiOa9trkzfAXUmNLliL7MOZpoi5UlHV5Yt0Jp0TZ9h8NmAURGQ2XXA7FadXbE9Ft
Wl2ToPqIMnlFeCF9HOhBaK1JaoagmgOphrcPjqGHYdW4cU4KME/s1zI1NOhyq/7P
v8xYLsKn00IX10RWSWl4Vw8NTSzAcA==
=8B2l
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
A checkpatch.pl improvement for the QEMU BH APIs.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmjj2TEACgkQnKSrs4Gr
# c8iAxwf+Pt4Pc6/8CuwSzz+uREnKZr9qHtFDwcvlJrlGwJLH7AAGOv5l5Ay8A/yC
# qmfLGlKjbpLLuh+A4q7pdFffbOP1goS8GeyoLRPRV9w3WhTp0GQovRp8BAxzNvCz
# qpWwjsCSNVq990IuoJCBl6/GWAOg9fgwzhZwufmiV6+xiYI+bg1au8ehU+eB824s
# BiOa9trkzfAXUmNLliL7MOZpoi5UlHV5Yt0Jp0TZ9h8NmAURGQ2XXA7FadXbE9Ft
# Wl2ToPqIMnlFeCF9HOhBaK1JaoagmgOphrcPjqGHYdW4cU4KME/s1zI1NOhyq/7P
# v8xYLsKn00IX10RWSWl4Vw8NTSzAcA==
# =8B2l
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Oct 2025 07:58:57 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [unknown]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
scripts/checkpatch: Avoid recommending legacy qemu_bh_new_guarded()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_bh_new_guarded() is considered legacy since commit 9c86c97f12
("async: Add an optional reentrancy guard to the BH API"); recommend
the new API: aio_bh_new_guarded().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250924163911.51479-1-philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Improve error reporting when virtqueue ring mapping fails by including a
device identifier in the error message.
Introduce a helper qdev_get_printable_name() in qdev-core, which returns
either:
- the device ID, if explicitly provided (e.g. -device ...,id=foo)
- the QOM path from qdev_get_dev_path(dev) otherwise
- "<unknown device>" as a fallback when no identifier is present
This makes it easier to identify which device triggered the error in
multi-device setups or when debugging complex guest configurations.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/230
Buglink: https://bugs.launchpad.net/qemu/+bug/1919021
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alessandro Ratti <alessandro@0x65c.net>
Message-Id: <20250924093138.559872-2-alessandro@0x65c.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 2nd parameter of pci_device_get_iommu_bus_devfn() about root PCIBus
backed by an IOMMU for the PCI device, the 3rd is about aliased PCIBus
of the PCI device.
Meanwhile the 3rd and 4th parameters are optional, pass NULL if they
are not needed.
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250929034206.439266-4-zhenzhong.duan@intel.com>
Fixes: a849ff5d6f ("pci: Add a pci-level initialization function for IOMMU notifiers")
Fixes: f0f37daf8e ("pci: Add a PCI-level API for PRI")
Fixes: e9b457500a ("pci: Add a pci-level API for ATS")
Fixes: 042cbc9aec ("pci: Add an API to get IOMMU's min page size and virtual address width")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In early days, we had different tricks to ensure caching-mode=on with VFIO
device:
28cf553afe ("intel_iommu: Sanity check vfio-pci config on machine init done")
c6cbc29d36 ("pc/q35: Disallow vfio-pci hotplug without VT-d caching mode")
There is also a patch with the same purpose but for VDPA device:
b8d78277c0 ("intel-iommu: fail MAP notifier without caching mode")
Because without caching mode, MAP notifier won't work correctly since guest
won't send IOTLB update event when it establishes new mappings in the I/O page
tables.
Now with host IOMMU device interface between VFIO and vIOMMU, we can simplify
first two commits above with a small check in set_iommu_device(). This also
works for future IOMMUFD backed VDPA implementation which may also need caching
mode on. But for legacy VDPA we still need commit b8d78277c0 as it doesn't
use the host IOMMU device interface.
For coldplug VFIO device:
qemu-system-x86_64: -device vfio-pci,host=0000:3b:00.0,id=hostdev3,bus=root0,iommufd=iommufd0: vfio 0000:3b:00.0: Failed to set vIOMMU: Device assignment is not allowed without enabling caching-mode=on for Intel IOMMU.
For hotplug VFIO device:
if "iommu=off" is configured in guest,
Error: vfio 0000:3b:00.0: Failed to set vIOMMU: Device assignment is not allowed without enabling caching-mode=on for Intel IOMMU.
else
Error: vfio 0000:3b:00.0: memory listener initialization failed: Region vtd-00.0-dmar: device 01.00.0 requires caching mode: Operation not supported
The specialty for hotplug is due to the check in commit b8d78277c0 happen before
the check in set_iommu_device.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250929034206.439266-3-zhenzhong.duan@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VTD spec rev 4.1 section 6.6:
"For implementations reporting the Enhanced Set Root Table Pointer Support
(ESRTPS) field as Clear, on a 'Set Root Table Pointer' operation, software
must perform a global invalidate of the context cache, PASID-cache (if
applicable), and IOTLB, in that order. This is required to ensure hardware
references only the remapping structures referenced by the new root table
pointer and not stale cached entries.
For implementations reporting the Enhanced Set Root Table Pointer Support
(ESRTPS) field as Set, as part of 'Set Root Table Pointer' operation,
hardware performs global invalidation on all DMA remapping translation
caches and hence software is not required to perform additional
invalidations"
We already implemented ESRTPS capability in vtd_handle_gcmd_srtp() by
calling vtd_reset_caches(), just set ESRTPS in DMAR_CAP_REG to avoid
unnecessary global invalidation requests of context, PASID-cache and
IOTLB from guest.
This change doesn't impact migration as the content of DMAR_CAP_REG is
migrated too.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250929034206.439266-2-zhenzhong.duan@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit c255488d67 "virtio: add vhost support for virtio devices"
added the get_vhost() function, but it did not include vhost-vdpa devices.
So when I use the vdpa device and query the status of the vdpa device
with the x-query-virtio-status qmp command, since vdpa does not implement
vhost_get, it will cause qemu to crash.
Therefore, in order to obtain the status of the virtio device under vhost-vdpa,
we need to add a vhost_get implement for the vdpa device.
Co-developed-by: Miao Kezhan <miaokezhan@baidu.com>
Signed-off-by: Miao Kezhan <miaokezhan@baidu.com>
Signed-off-by: Li Zhaoxin <lizhaoxin04@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <2778f817cb6740a15ecb37927804a67288b062d1.1758860411.git.lizhaoxin04@baidu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a way to disable DMA translation support in AMD IOMMU by
allowing to set IVHD HATDis to 1, and exposing HATS (Host Address
Translation Size) as Reserved value.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-23-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To be later reused by AMD, now that it shares similar property.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-22-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify amdvi_page_walk() by making it call the fetch_pte() helper that is
already in use by the shadow page synchronization code. Ensures all code
uses the same page table walking algorithm.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-21-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The AMD I/O Virtualization Technology (IOMMU) Specification (see Table
8: V, TV, and GV Fields in Device Table Entry), specifies that a DTE
with V=1, TV=0 does not contain a valid address translation information.
If a request requires a table walk, the walk is terminated when this
condition is encountered.
Do not assume that addresses for a device with DTE[TV]=0 are passed
through (i.e. not remapped) and instead terminate the page table walk
early.
Fixes: d29a09ca68 ("hw/i386: Introduce AMD IOMMU")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-20-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A guest must issue an INVALIDATE_DEVTAB_ENTRY command after changing a
Device Table entry (DTE) e.g. after attaching a device and setting up its
DTE. When intercepting this event, determine if the DTE has been configured
for paging or not, and toggle the appropriate memory regions to allow DMA
address translation for the address space if needed. Requires dma-remap=on.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-19-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to enable device assignment with IOMMU protection and guest DMA
address translation, IOMMU MAP notifier support is necessary to allow users
like VFIO to synchronize the shadow page tables i.e. to receive
notifications when the guest updates its I/O page tables and replay the
mappings onto host I/O page tables.
Provide a new dma-remap property to govern the ability to register for MAP
notifications, effectively providing global control over the DMA address
translation functionality that was implemented in previous changes.
Note that DMA remapping support also requires the vIOMMU is configured with
the NpCache capability, so a guest driver issues IOMMU invalidations for
both map() and unmap() operations. This capability is already set by default
and written to the configuration in amdvi_pci_realize() as part of
AMDVI_CAPAB_FEATURES.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-18-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On reset, restore the default address translation mode (passthrough) for all
the address spaces managed by the vIOMMU.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-17-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable the appropriate memory region for an address space depending on the
address translation mode selected for it. This is currently based on a
generic x86 IOMMU property, and only done during the address space
initialization. Extract the code into a helper and toggle the regions based
on whether the specific address space is using address translation (via the
newly introduced addr_translation field). Later, region activation will also
be controlled by availability of DMA remapping capability (via dma-remap
property to be introduced in follow up changes).
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-16-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the kernel IOMMU driver issues an INVALIDATE_IOMMU_ALL, the address
translation and interrupt remapping information must be cleared for all
Device IDs and all domains. Introduce a helper to sync the shadow page table
for all the address spaces with registered notifiers, which replays both MAP
and UNMAP events.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-15-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A replay() method is necessary to efficiently synchronize the host page
tables after VFIO registers a notifier for IOMMU events. It is called to
ensure that existing mappings from an IOMMU memory region are "replayed" to
a specified notifier, initializing or updating the shadow page tables on the
host.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-14-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support dropping all existing mappings on reset. When the guest kernel
reboots it will create new ones, but other components that run before
the kernel (e.g. OVMF) should not be able to use existing mappings from
the previous boot.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-13-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Keep a record of mapped IOVA ranges per address space, using the iova_tree
implementation. Besides enabling optimizations like avoiding unnecessary
notifications, a record of existing <IOVA, size> mappings makes it possible
to determine if a specific IOVA is mapped by the guest using a large page,
and adjust the size when notifying UNMAP events.
When unmapping a large page, the information in the guest PTE encoding the
page size is lost, since the guest clears the PTE before issuing the
invalidation command to the IOMMU. In such case, the size of the original
mapping can be retrieved from the iova_tree and used to issue the UNMAP
notification. Using the correct size is essential since the VFIO IOMMU
Type1v2 driver in the host kernel will reject unmap requests that do not
fully cover previous mappings.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-12-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the guest issues an INVALIDATE_IOMMU_PAGES command, decode the address
and size of the invalidation and sync the guest page table state with the
host. This requires walking the guest page table and calling notifiers
registered for address spaces matching the domain ID encoded in the command.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-11-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the minimal data structures required to maintain a list of address
spaces (i.e. devices) with registered notifiers, and to update the type of
events that require notifications.
Note that the ability to register for MAP notifications is not available.
It will be unblocked by following changes that enable the synchronization of
guest I/O page tables with host IOMMU state, at which point an amd-iommu
device property will be introduced to control this capability.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-10-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For the specified address range, walk the page table identifying regions
as mapped or unmapped and invoke registered notifiers with the
corresponding event type.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-9-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current amdvi_page_walk() is designed to be called by the replay()
method. Rather than drastically altering it, introduce helpers to fetch
guest PTEs that will be used by a page walker implementation.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-8-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make amdvi_get_pte_entry() return an error value (-1) in cases where the
memory read fails, versus the current return of 0 to indicate failure.
The reason is that 0 is also a valid value to have stored in the PTE in
guest memory i.e. the guest does not have a mapping. Before this change,
amdvi_get_pte_entry() returned 0 for both an error and for empty PTEs, but
the page walker implementation that will be introduced in upcoming changes
needs a method to differentiate between the two scenarios.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-7-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extracting the DTE from a given AMDVIAddressSpace pointer structure is a
common operation required for syncing the shadow page tables. Implement a
helper to do it and check for common error conditions.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-6-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The size of the region to invalidate depends on the S bit and address
encoded in the command. Add a helper to extract this information, which
will be used to sync shadow page tables in upcoming changes.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-5-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move code related to Device Table and Page Table to an earlier location in
the file, where it does not require forward declarations to be used by the
various invalidation functions that will need to query the DTE and walk the
page table in upcoming changes.
This change consist of code movement only, no functional change intended.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-4-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Document the common parameters used when emulating AMD vIOMMU.
Besides the two amd-iommu specific options: 'xtsup' and 'dma-remap', the
the generic x86 IOMMU option 'intremap' is also included, since it is
typically specified in QEMU command line examples and mailing list threads.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-3-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Invalidating the entire address space (i.e. range of [0, ~0ULL]) is a
valid and required operation by vIOMMU implementations. However, such
invalidations currently trigger an assertion unless they originate from
device IOTLB invalidations.
Although in recent Linux guests this case is not exercised by the VTD
implementation due to various optimizations, the assertion will be hit
by upcoming AMD vIOMMU changes to support DMA address translation. More
specifically, when running a Linux guest with VFIO passthrough device,
and a kernel that does not contain commmit 3f2571fed2fa ("iommu/amd:
Remove redundant domain flush from attach_device()").
Remove the assertion altogether and adjust the range to ensure it does
not cross notifier boundaries.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201116165506.31315-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250919213515.917111-2-alejandro.j.jimenez@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the ability to map a host unix socket to a guest tcp socket when
using the slirp backend. This feature was added in libslirp version 4.7.0.
A new syntax for unix socket: -hostfwd=unix:hostpath-[guestaddr]:guestport
Signed-off-by: Viktor Kurilko <murlockkinght@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250808143904.363907-1-murlockkinght@gmail.com>
Commit 3f9cfaa92c ("virtio-pci: Implement SR-IOV PF") added an
unconditional call from virtio_pci_exit() to pcie_sriov_pf_exit().
pcie_sriov_pf_exit() reads from the SR-IOV Capability in Configuration
Space:
uint8_t *cfg = dev->config + dev->exp.sriov_cap;
...
unparent_vfs(dev, pci_get_word(cfg + PCI_SRIOV_TOTAL_VF));
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This results in undefined behavior when dev->exp.sriov_cap is 0 because
this is not an SR-IOV device. For example, unparent_vfs() segfaults when
total_vfs happens to be non-zero.
Fix this by returning early from pcie_sriov_pf_exit() when
dev->exp.sriov_cap is 0 because this is not an SR-IOV device.
Cc: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Qing Wang <qinwang@redhat.com>
Buglink: https://issues.redhat.com/browse/RHEL-116443
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Fixes: cab1398a60 ("pcie_sriov: Reuse SR-IOV VF device instances")
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250924155153.579495-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that virtio_error() calls should work in an IOThread, add a
virtio-scsi IOThread test cases that triggers virtio_error().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-6-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Setting the vring's avail.idx can be useful for low-level VIRTIO tests,
especially for testing error scenarios with invalid vrings. Extract it
into a new function so that the next commit can add a test that uses
this new test API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-5-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_error() calls virtio_notify_config() to inject a VIRTIO
Configuration Change Notification. This doesn't work from IOThreads
because the BQL is not held and the interrupt code path requires the
BQL.
Follow the same approach as virtio_notify() and use ->config_notifier
(an irqfd) when called from the IOThread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-4-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The difference between these two functions:
- virtio_notify() uses the interrupt code path (MSI or classic IRQs)
- virtio_notify_irqfd() uses guest notifiers (irqfds)
virtio_notify() can only be called with the BQL held because the
interrupt code path requires the BQL. Device models use
virtio_notify_irqfd() from IOThreads since the BQL is not held.
The two functions can be unified by pushing down the if
(qemu_in_iothread()) check from virtio-blk and virtio-scsi into core
virtio code. This is in preparation for the next commit that will add
irqfd support to virtio_notify_config() and where it's unattractive to
introduce another irqfd-only API for device model callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-3-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a getter function so avoid accessing the ->config_notifier
field directly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-2-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[2] initialized 'No Reboot' bit to 1 by default. And due to quirk it happened
to work with linux iTCO_wdt driver (which clears it on module load).
However spec [1] states:
"
R/W. This bit is set when the “No Reboot” strap (SPKR pin on
ICH9) is sampled high on PWROK.
"
So it should be set only when '-global ICH9-LPC.noreboot=true' and cleared
when it's false (which should be default).
Fix it to behave according to spec and set 'No Reboot' bit only when
'-global ICH9-LPC.noreboot=true'.
1)
Intel I/O Controller Hub 9 (ICH9) Family Datasheet (rev: 004)
2)
Fixes: 920557971b (ich9: add TCO interface emulation)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922132600.562193-1-imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
