Now after merging the precopy and postcopy version of complete() hook,
rename the precopy version from save_live_complete_precopy() to
save_complete().
Dropping the "live" when at it, because it's in most cases not live when
happening (in precopy).
No functional change intended.
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20250613140801.474264-7-peterx@redhat.com
[peterx: squash the fixup that covers a few more doc spots, per Juraj]
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The hook is only defined in two vmstate users ("ram" and "block dirty
bitmap"), meanwhile both of them define the hook exactly the same as the
precopy version. Hence, this postcopy version isn't needed.
No functional change intended.
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20250613140801.474264-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Move it out of vanilla postcopy session, but instead a standalone feature.
When at it, removing the NOTE because it's incorrect now after introduction
of max-postcopy-bandwidth, which can control the throughput even for
postcopy phase.
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Link: https://lore.kernel.org/r/20250613140801.474264-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Unfortunately, it was never correctly shown..
This is only found when I started to look into making the blocktime feature
more useful (so as to avoid using bpftrace, even though I'm not sure which
one will be harder to use..).
So the old dump would look like this:
Postcopy vCPU Blocktime: 0-1,4,10,21,33,46,48,59
Even though there're actually 40 vcpus, and the string will merge same
elements and also sort them.
To fix it, simply loop over the uint32List manually. Now it looks like:
Postcopy vCPU Blocktime (ms):
[15, 0, 0, 43, 29, 34, 36, 29, 37, 41,
33, 37, 45, 52, 50, 38, 40, 37, 40, 49,
40, 35, 35, 35, 81, 19, 18, 19, 18, 30,
22, 3, 0, 0, 0, 0, 0, 0, 0, 0]
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Alexey Perevalov <a.perevalov@samsung.com>
Cc: Markus Armbruster <armbru@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20250613140801.474264-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Dave suggested the HMP output for "info migrate" can not only leverage the
lines but also better grouping:
https://lore.kernel.org/r/aC4_-nMc7FwsMf9p@gallifrey
I followed Dave's suggestion, and some more modifications on top:
- Added all elements into the picture
- Use size_to_str() and drop most of the units: benefit is more friendly
to most human eyes, bad side effect is lose of details, but that should
be corner case per my uses, and one can still leverage the QMP interface
when necessary.
- Sub-grouping for "Transfers" ("Channels" and "Page Types").
- Better indentations
Sample output:
(qemu) info migrate
Status: postcopy-active
Time (ms): total=47317, setup=5, down=8
RAM info:
Throughput (Mbps): 1342.83
Sizes: pagesize=4 KiB, total=4.02 GiB
Transfers: transferred=1.41 GiB, remain=2.46 GiB
Channels: precopy=15.2 MiB, multifd=0 B, postcopy=1.39 GiB
Page Types: normal=367713, zero=41195
Page Rates (pps): transfer=40900, dirty=4
Others: dirty_syncs=2, postcopy_req=57503
Suggested-by: Dr. David Alan Gilbert <dave@treblig.org>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Link: https://lore.kernel.org/r/20250613140801.474264-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-108-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-107-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-106-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-105-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For non-widening, we can use float_muladd_negate_product,
For widening, which uses dot-product, we need to handle
the negation explicitly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-104-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our current BFMOPA opcode pattern is the widening version
of the insn. Rename it to BFMOPA_w, to make way for
the non-widening version added in SME2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-103-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pattern we currently have as FMOPA_h is the "widening" insn
that takes fp16 inputs and produces single-precision outputs.
This is unlike FMOPA_s and FMOPA_d, which are non-widening
produce outputs the same size as their inputs.
SME2 introduces a non-widening fp16 FMOPA operation; rename
FMOPA_h to FMOPA_w_h (for 'widening'), so we can use FMOPA_h
for the non-widening version, giving it a name in line with
the other non-widening ops FMOPA_s and FMOPA_d.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-102-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-101-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-100-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-99-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-98-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move from sme_helper.c to the shared header.
Add a comment noting the lack of atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-97-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-96-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The msz > esz encodings are reserved, and some of
them are about to be reused. Split these patterns
so that the new insns do not overlap.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-95-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SVE2p1 consecutive register LD1/ST1,
and the SME2 strided register LD1/ST1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-94-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-93-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-92-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-91-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-90-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-89-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-88-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-87-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-86-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-85-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-84-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-83-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-82-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-81-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-80-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-79-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-78-richard.henderson@linaro.org
This instruction is present in both SME(1) and SVE2.1 extensions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use TRANS_FEAT to select the correct predicate.
Pass the helper and a boolean to do_WHILE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-77-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the API to pass element count rather than bit count.
This will be helpful later for predicate as counter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-76-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-75-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-74-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expand to memset plus the return value, when used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-73-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge predtest_ones into its only caller.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-72-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For WHILE, we have the count of enabled predicates, so we don't
need to search to compute the PredTest result. Reuse the logic
that will shortly be required for counted predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-71-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-70-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the single vector version within SVE decode space.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-69-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions are present in both SME(1) and SVE2.1 extensions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-68-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-67-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
